
MF05 adopts H.265 encoding and decoding technology, which can encode 1080P60 HD video into the network video stream, which is convenient for transmission. The encoded video stream can be restored to 1080P60 HD video after decoding.MF05 adopts low lag codec technology and can be used to transmit real-time high-definition video. MF05 includes encoding module MF05E and decoding module MF05D. MF05E can convert the video input from HDMI/SDI/AV interface into H.265/H.264 network video stream. MF05D can decode H.265/H.264 network video stream into HD video through HDMI interface Output to the display.

MF05 supports H.265 encoding and decoding, which can be used in scenes that require low bitstreams. It has rich interfaces and supports HDMI, VON, SDI, and other interfaces.

MF05 supports the conversion of high-definition video into encoded RTSP, TCP, UDP, TS video streams, which is convenient for wired or wireless transmission.

MF05 uses low lag code algorithms, and the delay of high-definition video is 120ms.

MF05 and M52 can quickly build a remote wireless HD transmission system*1。

MF05D supports simultaneous decoding of 4 channels of 1080P HD video, supports picture-in-picture display, Split-Screen-Display, and superimposes OSD function on the image.*2。
*1, For instructions on using M52 and MF05, please refer to the product page or user manual.
*2, Multi-channel decoding requires special firmware, please contact sales staff.
-
Bestes FPV-Videosendermodul 170–860 MHz, kabelloser RF-Audio-Video-Sender für FPV-Kamera, 3 W, PA, 50 km -
IP -Mesh 100mbit / s Wireless Video -Daten Transceiver 2x5w PA 16 hüpfen -
Drohnenverbindung für Videodaten-Funktelemetrie mit großer Reichweite. Drahtlose Übertragung zwischen UAV und Bodenkontrollstation -
UAV-Drohnen-Videodatenverbindungsmodul, drahtloser Videosender und -empfänger für Kamera-Langstrecken-TDD-Transceiver, Zweiwege-VCAN1401 -
COFDM-Video-Sender-Empfänger AV-Eingang HDMI-Ausgang FPV, Wireless 10km-15km-30km lange Reichweite billiger und länger COFDM-912T -
1740-1840MHz 2WPA 30 km Langstrecken -Video -Sender und Empfänger mit SBUS TTL -
30Km lange Distanz COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX für UAV Drone 1080P 908T -
Zwei-Wege-UAV-Wireless-Videodaten-RC-Control-Link-Modul, bidirektionaler Langstrecken-Transceiver, Sender-Empfänger Vcan1681 -
Langstrecke drahtlose Videodatensender und Empfänger für Drohnen -UAV -Roboter -
Drahtloser Videosender und -empfänger für Kameras, HDMI-HD-H265 264 Encoder 1W/2,5W PA 1080P60 Vcan1726 -
22KM 55 km 80 km 100 km 150 km Langstrecken Wireless Video Senderempfänger Transmission Transceiver PA 2W 5W 10W -
Drohnenvideo-Datentelemetrie-Sender-Empfänger UAV-Radioverbindung TDD-Transceiver -
10W PA 150KM luftgestützter Videodatenlink mit großer Reichweite, drahtloser UAV-Übertragungssender, Empfänger, breitbandiger taktischer Handgriff -
30-Millisekunde Drohne UAV HDMI Drahtloser Videosender Ultra-low-latency drahtloses Übertragungssystem Vcan1729 -
IP Mesh Manet Transceiver mit bidirektionalem Audio-IP-Board für Roboter UAV-Drohne -
150KM 100 MPBS-Frequenzhüpfen bei 2Bands UAV-Funkverbindung hohe Übertragungsrate und Anti-Interferenz -
Drahtlose Videodatenverbindung mit Drohnennetz, 150–200 km zentrumsloser Ad-hoc-Netzwerk-Transceiver mit großer Reichweite -
COFDM Modulator Demodulator Modul Encoder Decoder HDMI CVBS AV Eingang AES 256 FHD-HF-Streaming
Inhaltsverzeichnis
MF05 Encoding and Decoding Technology: HD Video into Network Video Stream
Das MF05 system is a professional solution designed to convert high-definition video into network video streams using advanced encoding and decoding technologies. By adopting the H.265/HEVC codec, MF05 can efficiently compress and transmit 1080P60 HD-Video, significantly reducing bandwidth usage while maintaining excellent video quality. After transmission, the encoded stream can be decoded back into full 1080P60 HD video, making it ideal for applications requiring high-definition real-time video over wired or wireless networks.
Low-Latency Real-Time Transmission
MF05 incorporates low-lag codec technology, ensuring minimal delay during video encoding and decoding. This makes it particularly suitable for real-time video transmission applications, inklusive Live-Übertragung, Fernüberwachung, industrielle Inspektion, and FPV operations. The system achieves a high-definition video latency of approximately 120 Frau, allowing operators to view and respond to events almost instantaneously.
Modular System: Encoding and Decoding Units
The MF05 system consists of two main modules:
- MF05E (Encoding Module): This module converts video inputs from HDMI, SDI, or AV interfaces into H.265/H.264 network video streams. It supports multiple input formats, ensuring compatibility with a wide range of professional cameras and video sources.
- MF05D (Decoding Module): This module receives the network video streams and decodes them back into high-definition video. The output is delivered via HDMI-Schnittstelle, which can be connected directly to monitors or other display devices.
Zusammen, MF05E and MF05D provide a flexible solution for converting local HD video into network streams for remote monitoring or transmission over long distances.
Multiple Video Interfaces and Compatibility
MF05 is designed with versatility in mind, supporting multiple input and output interfaces. It can handle HDMI, SDI, VON, and other common video interfaces, allowing integration with existing video equipment. This flexibility makes it ideal for scenarios where different camera types or legacy devices must coexist in a single system.
Network Video Streaming Capabilities
The MF05 system supports the conversion of HD video into several network video streaming protocols, einschließlich RTSP, TCP, UDP, and TS streams. This makes it highly compatible with both wired and wireless network infrastructures, allowing the video to be transmitted over LAN, WAN, or wireless COFDM links with minimal effort. Users can easily integrate MF05 into remote monitoring systems, drone-based video transmission, or IP-based broadcasting setups.
Multi-Channel Decoding and Display
The MF05D decoding module supports simultaneous decoding of up to four 1080P HD video channels, enabling multi-camera monitoring on a single display. It includes advanced features such as:
- Picture-in-picture (PiP) Anzeige for monitoring multiple streams simultaneously.
- Split-screen display to arrange multiple video feeds efficiently.
- On-Screen-Anzeige (OSD) overlays for adding text, Logos, or other critical information on each video channel.
This functionality allows operators to manage multiple video streams in professional control rooms or field operations efficiently. Note that multi-channel decoding requires special firmware, which can be provided by the sales team upon request.
Rapid Deployment with MF05 and M52
When combined with the M52 module, the MF05 system can quickly establish a remote wireless HD transmission system. This modular pairing allows users to set up reliable, low-latency HD video links without extensive configuration, Machen Sie es für geeignet für Live -Events, aerial videography, und Industrieinspektionen. Detailed instructions for combining MF05 and M52 modules are available in the product page and user manual.
Zusammenfassung
Das MF05 encoding and decoding system ist ein vielseitiges, high-performance solution for converting HD video into network streams. Mit Unterstützung für H.265/H.264-Kodierung, multiple interfaces (HDMI, SDI, VON), Übertragung mit geringer Latenz, and multi-channel decoding, it provides a professional-grade platform for real-time remote video monitoring and transmission. Its modular design, combined with optional M52 integration, allows rapid deployment of wireless or wired HD video systems for applications ranging from broadcasting and live events to drones and industrial inspections.

Stelle eine Frage
Vielen Dank für deine Antwort. ✨