Jak vypálit vlastní firmware do AI IPC kamery RV1126
Jak vypálit vlastní firmware do AI IPC kamery RV1126
The first burning needs to use DriverAssistant to install the driver.
Obsah
Enter Maskrom/loader
Do režimu vypalování lze vstoupit třemi způsoby:
1. reboot loader
After entering the system, run the reboot loader, and automatically enter the loader mode after restarting
Uboot：
After powering on, quickly press Ctrl + C to interrupt the Uboot startup, and then type the download command.
2. Short Circuit
Power off, use tweezers to short the two points in the red circle above, and power on
3. Burning
Open RKDev_Tool, a to bude zobrazovat “found a Maskrom device” nebo “found a Loader device”:
Select “upgrade firmwaru”:
Click on “firmware”:
A file selection dialog window pops up, select update.IMG, it may be stuck for a few seconds to load the firmware.
Then click upgrade:
You can see that the log on the right starts to show the burning process.