4K HDMI Video Encoder Плата декодера HDMI до Ethernet і Ethernet до HDMI RTSP UDP

Table of Contents
Feature
- Low Latency Video Encoder/Decoder: Supports H.265/H.264 encoding and decoding with full HD resolution, up to 3840x2160P at 30 кадрів в секунду.
- Аудіокодек: Includes audio input and output capabilities.
- Video Encoding Functionality:
- Введення: HDMI
- Вихід: Streams via Ethernet using RTSP/TS protocols
- Protocols Supported: TCP and UDP
- Video Decoding Functionality:
- Введення: Streams via Ethernet using RTSP/TS protocols (TCP and UDP)
- Вихід: HDMI
- Management Interface: Accessible via a web UI or UART.
- Pairing Capability: The one 4K encoder can be paired with another 4K decoder for low latency operation, achieving approximately 100ms latency for 1080P60 H.265 video.
вступ
Specification

IO
| Вхід HD відео | HDMI, type A connector. |
| Вихід HD відео | HDMI, type A connector. |
| Аналоговий аудіовхід / вихід | 3Роз'єм PIN PH1,25 мм. |
| Дані UART | 3Роз'єм PIN PH1,25 мм, TTL 3,3 В, baud rate adjustable. |
| Control-UART | 4Роз'єм PIN PH1,25 мм, TTL 3,3 В, baud rate adjustable. |
| USB-хост | 4Роз'єм PIN PH1,25 мм, for software upgrading and USB disk recording When works as video decoder. |
| Вхід живлення | 2Роз'єм PIN PH2,0 мм. |
| Ethernet1 | 4Роз'єм PIN PH1,25 мм. |
| Ethernet2 | 4Роз'єм PIN PH1,25 мм. |
| FPC_main | To connect with our COFDM modulator. |
Відео та аудіо
| Відео вхід / вихід | HDMI |
| Формати відео | 3840P30, 3840P25, 3840P24, 1080P60, 1080P50, 1080I60, 1080I50, 1080P30, 1080P25, 720P60, 720P50, 720P30, …… |
| відео
encoding or decoding |
H.265/H.264, setup via control UART or Web UI;
Бітрейт регулюється; Supports proprietary H.265/H.264 video compression only used p-frames for the lowest latency(the 4K encoding plus 4K decoding latency is about 130ms for 1080P60 video). |
| Аудіо вхід / вихід | Вбудований HDMI або аналоговий звук. |
| Кодування звуку | AAC, 16біт, мононуклеоз, 48Кбіт/с |
| Протокол потоку Ethernet | потік UDP TS, потік RTSP, потік UDP TS + потік RTSP |
Моніторинг і контроль
Comprehensive setup via web UI or AT command via control UART.
Діапазон температур
Повна специфікація: 0° до +70°C Навколишнє середовище (Додатково: -40° до +85 °C )
Зберігання:від –40° до +85°C
Фізичні характеристики
Dimensions: 80*50mm(не включаючи роз'єми поза платою)
Weight: 27g
Вимоги до живлення
Діапазон введення: 7~30 В постійного струму
Power consumption: <250мА при 12 В
Сигнали введення/виведення

Інтерфейс вхідного живлення — 2-контактний роз’єм PH2,0 мм. The module board also provides a 5V power output for fan that it may be required when the module is integrated with wireless modules.
Дані UART
The 4K module supports one channel uart data packed with the stream and transmitted via the Ethernet. When 4K encoder works paired with 4K decoder and Ethernet linker (бездротовий або дротовий), the data to this uart will be transferred to the remote 4K uart.
Контроль UART
4Роз'єм PIN PH1,25 мм, TTL 3,3 В. The 4K board system can be set-up via this control uart with AT command.
Audio in and Audio out
3Роз'єм PIN PH1,25 мм. When 4K encoder board works paired with 4K decoder board and Ethernet linker (бездротовий або дротовий), it supports bidirectional voice communication. The analog audio input can be line in or Mic in, the analog audio out is designed to output to earphone or audio amplifier.
Ethernet1 and Ethernet2
Two 4PIN PH1.25mm connector, 100M ethernet port.
When the 4K board is shipped as an independent encoding or decoding board, Ethernet1 and Ethernet2 are internally set to bridge, with the same IP addresses for both network ports. The input or output of video data is through the Ethernet1 interface, and Web UI access is through the Ethernet2 interface; Ethernet1 supports connecting with our bidirectional wireless transmission modules or other third-party bidirectional linkers. Ethernet1 supports UDP TS stream, RTSP stream and UDP TS stream + потік RTSP.
When using the 4K board with our COFDM wireless transmitter modulator module (connected through FPC-Main interface via flat cable), Ethernet1 and Ethernet2 are internally set as two independent network ports, with different IP addresses.For this application, the Ethernet1 interface cannot be used externally because network signals are multiplexed to the FPC-Main interface.The Ethernet2 interface can be used as an access network port for the Web UI, or can connect to the IP camera through the Ethernet2 network port. The IP camera video signal can be transmitted through the COFDM wireless module modulator. The below picture shows 4K module connecting with our COFDM transmitter modulator module.
4К& Модуль модулятора передавача COFDM
Світлодіоди та GPIO
Є три сигнальні індикатори (LED1/LED2/LED3) on the right side of the 4K module board, and the indicator light signals are simultaneously connected to the J6011 connector PINs (4Роз'єм PIN 1,25 мм). Деяким клієнтам може знадобитися встановити світлодіоди індикаторів на корпус корпусу, then they can use J6011 connector PINs to add indicator LEDs on their housing case.
When the 4K works as an encoding board, відповідні сигнали світлових індикаторів наступні:
| світлодіоди | Description | Відповідний PIN-код J6011 |
| LED1 | Power-LED: червоного кольору, constant light when the board is normally powered. | LED1-PIN |
| LED2 | Зелений колір, постійне світло, коли вхідне відео виявлено успішно, інакше не засвітиться. | LED2-PIN |
| LED3 | Кодування-LED: зелений колір, блимає під час нормального кодування відео. | LED3 PIN |
When the 4K works as a decoding board, відповідні сигнали світлових індикаторів наступні:
| світлодіоди | Description | Відповідний PIN-код J6011 |
| LED1 | Power-LED: червоного кольору, постійне світло, коли плата нормально живиться. | LED1-PIN |
| LED2 | Зелений колір, constant light when video is being recorded with USB disk, інакше не засвітиться. | LED2-PIN |
| LED3 | Decoding-LED, зелений колір, блимає, коли відеопотік приймається та декодується нормально | LED3 PIN |
When using J6011 PIN signal to connect LED indicator lights externally, в “positive pin” of the external LED2 and LED3 indicator lights should be connected to the corresponding J6011 PIN, і “negative pin” should be connected to any GND on the 4K board; When connecting the external LED1 power indicator light, connect the “positive pin” to the J6011 LED1-PIN and the “negative pin” to any GND on the 4K board.
GPIO signal on J6011 connector: reserved GPIO for using as special customized software.
FAQ
Q1: Does it support CVBS analog video input?
A1: No, only HDMI video input.
Q2: Can you offer me with a metal box?
A2: звичайно, Перегляньте зображення нижче.




Q: What is the difference between the 4K decoder board I purchased and the other 4K + CVBS decoder board (модель 2227)?
A: Our engineer would like to remind you that the 4K board you purchased supports both encoding and decoding. Проте, when used as a decoder, it only supports up to 4K at 30 FPS.
Якщо вам потрібно 4K at 60 FPS, we recommend the alternative модель 2227 board. This board:
- Підтримує 4К 60 FPS розшифровка
- Is slightly larger in size
- Підтримує Відеовихід CVBS
- Is offered at the same price
Додатки
- Real-Time Aerial Video Streaming
The board can be used for потокове відео в реальному часі from drones to ground control stations, providing high-quality 4K video feeds for surveillance, відображення, та перевірка. Its low-latency encoding and decoding capabilities make it ideal for live broadcast scenarios, where high-quality, real-time video is crucial for decision-making.
- Повітряне спостереження & Моніторинг
Drones equipped with the 4K HDMI encoder can be used for aerial surveillance, capturing 4K video from high altitudes and transmitting it over Ethernet or wireless links. This is particularly useful for громадська безпека, військова розвідка, or екологічний моніторинг. The ability to stream video in HD or 4K resolution ensures clarity for critical operations.
- Drones for Search & Rescue Operations
в пошуково-рятувальні роботи, drones need to transmit live video feeds to ground crews to locate missing persons or assess disaster zones. The encoder-decoder module allows for seamless HD/4K video transmission, навіть у складних умовах, helping rescue teams get crucial, real-time visual information from the drone.
- Inspection of Infrastructure and Critical Assets
Drones are increasingly being used for inspecting infrastructure such as power lines, bridges, and oil pipelines. The encoder module allows for high-definition video recording and streaming to ground systems, що дозволяє remote inspections and reducing the need for manual inspections in dangerous or hard-to-reach areas.
- Broadcasting and Live Streaming from UAVs
The board’s capability to stream high-definition video with низька затримка makes it perfect for прямий ефір програми, такі як спортивні заходи, aerial cinematography, or drone racing. The ability to handle real-time, high-quality video streaming is essential for professional-grade broadcasts.
- Integrated with COFDM for Wireless Communication
When paired with a COFDM (Coded Orthogonal Frequency Division Multiplexing) модуль, this encoder-decoder system is perfect for creating a дальній, wireless communication link between drones and ground stations. This integration allows for reliable, high-quality video transmission even in поза межами прямої видимості (NLOS) середовищ.
- Remote Control and Telemetry Data Transmission
The module can transmit not only video data but also телеметричні дані (via UART) over the same Ethernet link. This is essential for дистанційне керування of UAVs and monitoring flight parameters (напр., висота, швидкість, час автономної роботи) in real-time.
- Military and Defense Applications
In military settings, UAVs are used for intelligence gathering, розвідка, and спостереження. The encoder-decoder board ensures the secure and efficient transmission of HD/4K video streams to ground units, offering strategic advantages during operations in areas with poor or unstable connectivity.
- Сільськогосподарські дрони
Drones used in precision agriculture can benefit from high-definition video streaming for моніторинг посівів and field inspections. The encoder module allows for the transmission of detailed video, helping agricultural experts monitor large areas efficiently and make timely decisions based on visual data.
- Training and Simulation
в drone training and simulation середовищ, the board enables the real-time transmission of live drone footage to instructors and students. This makes it easier to provide training sessions and simulate real-life scenarios that require visual observation and tactical decision-making.
Параметри налаштування
- Video Resolution and Frame Rate:
- The board supports 4K (3840x2160P) resolution at 30 fps and can be configured for other resolutions such as 1080P60, 1080P50, and 720P60. You can select the resolution and frame rate based on the specific needs of your project.
- Custom Firmware:
- The module can be equipped with optional firmware to support additional features such as split-screen mode for displaying up to four 1080P video channels. You can also request modifications to the firmware to suit unique application requirements.
- Параметри звуку:
- The board supports both HDMI embedded audio and analog audio input/output, which can be configured for your specific system. You can also choose different audio codecs such as AAC (16біт, мононуклеоз, 48Кбіт/с) to meet your needs.
- Control Interface Customization:
- The management interface can be customized either via a web UI or a UART control interface. You can request custom control protocols or configurations for better integration with your existing system.
- Network Protocol Customization:
- The board supports multiple Ethernet streaming protocols, including UDP TS stream, потік RTSP, and a combined UDP TS + потік RTSP. Depending on your network infrastructure, you can adjust the protocol settings to suit your environment.
- Physical Enclosure:
- The module can be delivered with a customized metal box or housing, providing additional protection and mounting options. The box can also include customized connectors or slots for easy integration into your system.
- GPIO and LED Indicators:
- The GPIO signal and the LED indicators can be customized for specific signaling needs. Наприклад, you can integrate external LED indicators or customize the control signals via the J6011 connector.
- Power Input/Output:
- The power input can be customized to suit your device’s power requirements, ranging from 7V to 30V DC. Додатково, the module offers a 5V power output for use with cooling fans or other components in integrated systems.
- Діапазон температур:
- The module comes with standard temperature specifications (0° to +70°C), but for demanding environments, it can be customized to handle a wider temperature range from -40° to +85°C.
This board can be tailored in a variety of ways to fit your specific video streaming, encoding/decoding, and networking needs. Let me know if you need any further details or specific configurations!
Плати модулів кодера
Плати модулів декодера
Доступний для налаштування
Нові кодери
| No. | Назва продукту | Конфігурація | Ключові характеристики | Статус |
|---|---|---|---|---|
| 1 | Двоканальний USB UVC кодер відео у видимому світлі | 2× USB-вхід | Підтримує подвійне кодування відео з камери USB, і потокове передавання RTSP; локальний вихід CVBS/HDMI; перемикання режимів відображення | Масове виробництво |
| 2 | Двоканальний кодер (1× Видиме світло USB + 1× USB-тепловізійна камера) | 2× USB-вхід | Підтримує подвійну камеру USB (видно + теплові) захоплення, кодування, і потокове передавання RTSP; локальний вихід CVBS/HDMI; перемикання режимів відображення | Масове виробництво |
| 3 | Декодер RTSP, модуль дисплея HDMI/CVBS | HDMI + Вихід CVBS | Підтримує до 4×1080P@30fps потокове декодування RTSP; Підтримка переадресації потокового відео; Вихідний дисплей HDMI/CVBS | Зразок доступний |
| 4 | RTSP декодер HDMI/CVBS дисплейний модуль з 4.3"/5" ЖК | Вихід HDMI + РК-екран | Підтримує до 4×1080P@30fps потокове декодування RTSP; пересилання протоколу; Вихідний дисплей HDMI/CVBS | Налагодження |
| 5 | Двоканальний кодер (1× Видиме світло USB + 1× Аналог CVBS) | 1× CVBS + 1× USB UVC вхід | Подвійне відео (USB + CVBS), кодування та потокове передавання RTSP; локальний вихід CVBS/HDMI; перемикання режимів відображення | Налагодження |
| 6 | Двоканальний кодер (1× USB UVC + 1× Аналог AHD) | 1× AHD + 1× USB UVC вхід | Подвійне захоплення відео (USB + AHD), кодування та потокове передавання RTSP; локальний вихід CVBS/HDMI; перемикання режимів відображення | Налагодження |
| 7 | Двоканальний кодер (1× CVBS + 1× Аналогове відео AHD) | CVBS + AHD 2 відео вхід | Подвійний аналоговий запис відео, кодування та потокове передавання RTSP; локальний вихід CVBS/HDMI; перемикання режимів відображення | Налагодження |
| 8 | Двоканальний кодер (1× Камера CMOS + 1× USB-тепловізійна камера) | 1× інтерфейс USB | Підтримує CMOS + Зйомка з термокамерою USB, кодування та потокове передавання RTSP; локальний вихід CVBS/HDMI; перемикання режимів відображення | Масове виробництво |
Для індивідуальних рішень для перетворення вхідного/вихідного відеосигналу, яких немає в списку наших продуктів, будь ласка, зв'яжіться з нами для підтримки OEM/ODM. Ми можемо розробити індивідуальні продукти відповідно до ваших вимог.



Джон –
This 4K HDMI encoder/decoder board is a game-changer! I was amazed how effortlessly it converted HDMI to Ethernet and back, eliminating long cable hassles. The 4K video stays crisp, and RTSP/UDP support lets me stream flawlessly to multiple devices. Setup was surprisingly simple—no lag or glitches during intense video sessions. Perfect for professional installations or remote monitoring. Надійний, якісний, and truly versatile. Highly recommend for anyone needing robust HDMI-over-IP solutions!