IP mesh network radio module Wireless data transceiver

IP mesh network radio module for swarm drones

Name: IP mesh network radio module for swarm drones - iVcan.com
SKU: VCAN1999

எழு: VCAN1999 வகை: வயர்லெஸ் டேட்டா டிரான்ஸ்மிஷன்

IP mesh network radio module for swarm drones

பொருளடக்கம்

வசதிகள்

தி 1999 IP mesh network radio module realizes centerless long-distance communication between large-scale nodes.

All nodes can communicate independently without interfering with each other. It solves the problems of large-scale dense channel access, wireless transmission, dynamic networking, and unmanned clusters.

Technical problems such as flexible reorganization and real-time collaboration are required to realize that the swarm network has the networking capability of biological swarm-like behavior, scenario-driven autonomous networking, flexible reorganization and intelligent collaboration capabilities.

தி 1999 IP mesh network radio module has below features:

large-capacity large-scale node access capabilities;

16-hop self-organizing network coverage capabilities;

ultra-low latency;

simple and easy to use

தி 1999 IP mesh network radio module can be used for swarm drones, இன்டர்நெட் ஆஃப் திங்ஸ், data links, தொலையியக்கி, Application scenarios such as data collection, artificial intelligence, and individual soldier equipment.

விவரக்குறிப்பு

அதிர்வெண் வரம்பில்: 825MHz~850MHz or 902~928Mhz
ரேடியோ அலைவரிசை அலைவரிசை: 1MHz/500kHz/250kHz/125kHz
Air interface data rate: maximum 740kbps@1MHz, 370kbps@500kHz, 185kbps@250kHz, 92kbps@125kHz
Supported number of nodes: அதிகபட்ச 1024
Number of network hops: அதிகபட்ச 16 துள்ளுகிறது.
Full multi-tasking communication: ஆதரவு;
Visible distance: ≥30 kilometers;
Centerless ad hoc (mesh) network: Supports centerless ad hoc network, and the damage of any node in the network will not affect communication;
Frequency hopping: supports no frequency hopping and frequency hopping, the maximum frequency hopping speed is 1800 times per second
Centerless self-organizing network: Supports centerless self-organizing network. The damage of any node in the network will not affect the communication.
Network establishment time: உள்ளே 1 இரண்டாவது
End-to-end transmission delay: minimum 2ms
Dynamic topology: Supports dynamic topology, supports nodes joining and leaving, and can communicate normally even if the network topology changes or deforms.
Time self-sustaining: the network can be built without external timing
பரிமாற்ற சக்தி: 0.5டபிள்யூ (can be connected to an external high-power amplifier)
உணர்திறன் பெறுதல்: -114dBm@125kHz, -111dBm@250kHz, -108dBm@500kHz, -105dBm@1MHz
குறைந்த சக்தி நுகர்வு: The power consumption is less than 1 watts when receiving and less than 5 watts when transmitting.
Frequency stability: ≤1ppm
குறியாக்க: AES128-bit encryption
இயக்க மின்னழுத்தம்: 3.6～5V
இயக்க வெப்பநிலை: -30～+75℃
தொகுதி எடை: <45கிராம்

Working parameters

parameter	நிலை	சிறிய	typical	அதிகபட்ச	unit
வேலை அதிர்வெண்		825		850	மெகா ஹெர்ட்ஸ்
இயக்க வெப்பநிலை		-30	25	+75	℃
ஆப்பரேட்டிங் மின்னழுத்த		3.6	4.2	5	IN
அனுப்புதல் சக்தி	@VCC=5V	26	27	28	dBm
உணர்திறன் பெறவும்	125கிலோஹெர்ட்ஸ்	-116	-114	-112	dBm
	250கிலோஹெர்ட்ஸ்	-113	-111	-109
	500கிலோஹெர்ட்ஸ்	-110	-108	-106
	1மெகா ஹெர்ட்ஸ்	-107	-105	-103
Maximum RF input power				+10	dBm
Sleep current	@EN=0		40		uA
receive current			200	240	mA வில்
Emission current	@VCC=5V，0.5டபிள்யூ		1000	1200	mA வில்

※Note:If the working conditions of the module exceed the above limit values, இது தொகுதிக்கு நிரந்தர சேதத்தை ஏற்படுத்தலாம்.

IP mesh network radio module connector

IP mesh network radio module wireless data transceiver connector

வரிசை எண்	Interface name	Interface definition	கருத்து
1	Power interface	Power supply positive	XT30PW-M, external 5V-28V power supply or battery.
1	Power interface	Negative power supply	XT30PW-M, external 5V-28V power supply or battery.
2	Mode control	சி	configuration mode
2	Mode control	டி	Data transparent transmission mode
3	தரவு இடைமுகம்	3.3V power output	Load ≦150mA
		Serial port Tx (பி)	Support TTL3.3V level, RS232 level, RS485 level. Communicate in advance before placing an order.
		Serial port Rx (ஒரு)
		land	data place
		Mode0	For working mode configuration pins, please refer to the specification sheet.
		ACK	Module configuration status indication signal.
4	Status Indicator	PWR power indicator light	Lights up when power is input.
		TX transmit indicator light	The power-on self-test lights up briefly, and the indicator light lights up when data is being transmitted.
		RX receiving indicator light	The power-on self-test lights up briefly, and the indicator light lights up when data is received.
		CA interference indicator light	It lights up briefly during power-on self-test and stays on in configuration mode. In transparent transmission mode: விளக்கு எரியும்போது, it means there is interference on the air interface. The brighter the light, the stronger the interference.
		FU data cache indicator	Lights up when the data cache is full.
		HFU data cache indicator	Lights up when the data cache is half full.
5	RF வெளியீடு	ரேடியோ அலைவரிசை வெளியீடு இடைமுகம்	எஸ்எம்ஏ கே，

Core module pins and definitions

IP mesh network radio module pins and definitions

abbreviation	describe
FROM	Digital input
DO	Digital output
PART	Digital input or output
பி	பவர்
ஜி	தரையில்

pin definition table

Pin NO	Pin name①	வகை	விளக்கம்
1	RF_TR0	DO	Send and receive indicator signals, low level is transmitting, high level is receiving (external control radio frequency switch)
2	RF_TR1	DO	Send and receive indicator signals, high level is transmitting, low level is receiving (external control radio frequency switch or LED indicator light indicates that there is data transmission on the air interface)
3	RF_TXON	DO	Power amplifier enable signal, low level means off, high level means on (external control power amplifier)
4	RF_RXON	DO	Low-noise amplifier enable signal, low level means off, high level means on (externally controlled low-noise amplifier)
5	CARRIER_S	DO	CARRIER_SENSE carrier frame listening indication signal, high level means there is a carrier on the air interface, and an external LED indicator light can be connected to indicate that there is data reception on the air interface.
6	ACK	DO	Module configuration status indication signal, high level means configuration is completed, low level means configuration is in progress
7	IN③	FROM	Module turn on enable signal, low level module is turned off, high level or floating module is turned on
8	MODE0	FROM	Module working mode selection signal, specific function description is shown in Table 6
9	MODE1	FROM
10	நிலம்	ஜி	நிலம்
11	UART_RXD	FROM	Module serial port receiving pin
12	UART_TXD	DO	Module serial port transmitter pin
13	HALF_FULL	DO	Module data cache indication signal, high level means the data cache is half full
14	FULL	DO	Module data cache indication signal, high level means the data cache is full
15	நிலம்	ஜி	நிலம்
16	JTAG_TCK	FROM	Module programming pin②
17	JTAG_TDI	FROM
18	JTAG _TDO	DO
19	JTAG _TMS	FROM
20	JTAG _TRST	FROM
21	நிலம்	ஜி	நிலம்
22	நிலம்	ஜி	நிலம்
23	VCC	பி	External 3.6V~5V battery or power supply
24	VCC	பி	External 3.6V~5V battery or power supply
25	மீது	AIO	RF signal input/output pin, connected to an external 50Ω antenna or external RF front-end, optionally connected to IPEX 1.
26	நிலம்	ஜி	நிலம்

குறிப்பு:

The module is internally regulated by 3.3V LDO, and all digital IOs are at 3.3 LVTTL level;
In order to facilitate subsequent software upgrades, it is recommended to lead out the module programming pins with pin headers or connectors;
The EN pin cannot be directly connected to the power supply. If it needs to be connected to the power supply, a current limiting resistor must be added or a 3.3V LVTTL level control switch must be used;