Упутство за употребу ИП МЕСХ Ад Хоц мреже
Version number: iVcan-20230606
Преглед садржаја
Brief introduction
- Our Ad hoc network communication radio station, as a mobile self-organizing network, supports any network topology.
- Unlike traditional wireless networks, it is a wireless broadband system with no center, distributed, multi-hop relay, dynamic routing, strong invulnerability, and good scalability.
- Some routing protocols complete the wireless communication between nodes through wireless multi-hop forwarding.
- An ad hoc distributed broadband wireless network transmission system with an efficient MAC layer transmission protocol and a two-layer routing protocol.
- All nodes are completely equal, without any infrastructure, and can quickly build a dedicated self-organizing network between mobile nodes, provide instant adaptive communication, have excellent broadband performance, and support the real-time transmission of multimedia information such as video coding and audio coding.
- The system technology has the advantages of strong anti-interference ability, high spectrum efficiency, велика даљина преноса, anti-fading ability, and strong diffraction ability.
- It can realize real-time and high-quality wireless two-way data transmission functions in complex and non-line-of-sight environments.
Technical Features
- There is no need to set up a central station and complex system configuration. After the site is powered on, it will automatically form a network, and the communication can be started in “секунде”;
- Arbitrary topology, multi-hop relay, relay forwarding;
- The logical attributes of each node can be flexibly configured;
- Сада, the same frequency network can support the interconnection of ≥32 nodes;
- The channel is encrypted with AES;
- The system data bandwidth peak value is 90Mbps;
- Strong anti-interference ability, high spectrum efficiency, велика даљина преноса, анти-интерференција
- Strong falling ability and diffraction ability
технички параметри
- Communication frequency: 1412~1452MHz, adjustable in 5MHz steps;
- пренос снаге: 2*30дБм (2*1П), 1dBm step adjustable。
- Bandwidth mode: 5 / 10 / 20 МХз;
- metod модулације: multi-carrier TDD-COFDM;
- Carrier modulation: BPSK/QPSK/16QAM/64QAM (adaptive or fixed);
- primite осетљивост: -98дБм @ 10МХз;
- Communication distance: 30км (ground-air/air-air line-of-sight), 8км (ground-ground line-of-sight);
- Communication rate: peak 90Mbps (adaptive);
- Кашњење преноса: Single jump about 2ms;
- Multi-hop capability: до 8 video jumps;
- Start time: ≤25С;
- Network access time: less than 1 друго;
- Routing switching: less than 1 друго;
- дата интерфаце: network port x 2, РС232 к 2;
- Потрошња струје: 2~8W
- Protection level: ИП65;
- Радна температура: -40~ +70 ℃;
- Димензије: dužina: 72.8mm*width 47.3mm*height 17.9mm
- тежина: 78г
Software operation Instructions
Support 5M, 10П, and 20M bandwidth, real-time graphical interface display, real-time map indication, итд.
The software disables DHCP by default, and the default IP address is 192.168.17.1 If you forget the address, please connect the 9th pin of the 26PIN cable to the ground to reset the parameters.
Enter the IP address of the module in the browser, and the default username and password are both admin. It takes about 20s for the module to connect to the network from power-on. The recommended browser is Chrome.
After entering, it defaults to simple mode, click expert mode to unlock more settings, suitable for professional debugging.
Status section:
преглед:
Topology map: (automatic refresh is turned off by default to save bandwidth, you can check automatic refresh)
Check only the display path, you can know the direct jump point relationship of each module
Check the details to judge the data connection status of each module. These are displayed dynamically in real time
Click Details: You can know the specific situation of each module directly:
Terminal state:
Ad hoc network: You can remark the name, наравно, it can also be operated in the terminal state.
Spectrum scanning: Check the interference of each frequency band. Наравно, the frequency bands of different modules are purchased, and the scanning frequency bands are different.
Map: (Наравно, to know the location information of each terminal, GNSS modules such as GPS or Beidou need to be installed)
Support tile maps, image maps, network maps, итд.
Configuration section
начин: 1. MESH node or bridge configuration
2. Wireless configuration:
2.1 Transmission power configuration, the power of different products purchased is different.
Ширина Канала: 5M 10M 20M 40M
Цханнел: Different channels are used to purchase different products
The coverage distance (метара) needs to be filled in according to the actual situation. If it is set to 3000 метара, it is impossible to actually run to 5000 метара.
Number of Antennas 2
Fixed MCS rate: Can be set to off for automatic selection. If you want stable transmission, it is recommended to set the manual, домет (MCS0 to MCS15)
Проток, модулација, стопа
Limit MCS rate: It is recommended to enable it. After enabling it, if the fixed rate is MCS4, the software will automatically select the best modulation method from MCS0 to MCS4 during the test.
5П | 10П | 20П | 40П | ||
MCS0 | СНСК 1/2 | 1.7П | 3.3м | 6.5П | 13.5П |
MCS1 | КПСК 1/2 | 3.2м | 6.5П | 13м | 27м |
MCS2 | КПСК 3/4 | 4.8м | 9.8м | 19.5П | 40.5П |
MCS3 | 16КАМ 1/2 | 6.5П | 13м | 26П | 54П |
MCS4 | 16КАМ 3/4 | 9.7П | 19.5П | 39П | 81П |
MCS5 | 64КАМ 2/3 | 13м | 26П | 52м | 108П |
MCS6 | 64КАМ 3/4 | 14.5П | 29П | 58.5П | 121П |
MCS7 | 64КАМ 5/6 | 16П | 32.5П | 65м | 135П |
MCS8 | СНСК 1/2 | 3.2м | 6.5П | 13м | 27м |
MCS9 | КПСК 1/2 | 6.5П | 13м | 26П | 54П |
MCS10 | КПСК 3/4 | 9.7П | 19.5П | 39П | 81П |
MCS11 | 16КАМ 1/2 | 13м | 26П | 52м | 108П |
MCS12 | 16КАМ 3/4 | 19.5П | 39П | 78П | 162П |
MCS13 | 64КАМ 2/3 | 26П | 52м | 104П | 216П |
MCS14 | 64КАМ 3/4 | 29П | 58.5П | 117П | 243П |
MCS15 | 64КАМ 5/6 | 32.5П | 65м | 130П | 270П |
From MCS0 to MCS7, two wireless ports send the same data in order to improve stability during the movement.
From MCS8 to MCS15, the two wireless ports send different data, which can make the rate X2
If it is in a mobile state, it is recommended to use BPSK or QPSK to transmit data. 16QAM and 64QAM are suitable for use with fixed transmission.
If MCS8 to MCS15 is used, it is recommended that the antennas of the two ports be 90 degrees from each other, на пример, one is vertical and the other is horizontal.
If drones are used, MCS0 to MCS2 is recommended.
The greater the bandwidth, the lower the sensitivity. The same goes for modulation.
above rate unit bps
3. мрежа:
4. User management:
5. систем
6. Tools Configure serial port, GPS/Beidou/GNSS, 4G/5G access, and other parameters
6.1 Multi-device management, in the upper right corner, you can log in and manage users remotely, and it is also a real-time dynamic interface display or map display.
6.2 Serial port software settings:
Select Expert Mode, алат, and UART Interface.
choose new
Пажња, if you use the serial port to transmit serial data, you have to choose ttyS0 (COM1 of hardware) and ttyUSB0 (COM2 of hardware), ttyATH0 is invalid, режим: network
Број бауда 115200, Стоп-бит 1, parity none.
име 1, protocol UDP, IP address, 192.168.55.100 (the IP address here is the IP address of the other device, на пример, input the IP of the computer for the computer, and input the IP of the device for the device).
лука 20005, 20003. Choose a port number
The computer’s IP is set to a fixed 192.168.17.100
Short the TX RX pins of COM1 and COM2 of the device.
Use the TCP UDP test tool to fill in the IP and port of the device.
Send it to loop back the data.