Video Data RC Wireless Transmission System

Video Data RC Wireless Transmission System

VCAN1643 is a highly integrated wireless transmission system that can transmit FHD video, dane, and RC signals simultaneously. The transmission distance is 7km OR 17km. It has three frequency bands: 800MHz, 1.4GHz, and 2.4GHz. Users can set the frequency they need through the web page or software. It has rich interfaces: HDMI/SDI/CVBS, UART, SBUS, and Ethernet. It is very suitable for drone industry applications.

“All in one”Przenoszenie
The air unit has HDMI/SDI/CVBS/ETH port, which can be used for video input. The ground unit has HDMI/EHT port, which can be used for video output. The device also has two UART ports and an SBUS port, which can be used for data and RC transmission.

Ultra-Long distance transmission

The maximum transmission distance of M50 is 7km, While M51 is 17km, under the line of sight.

SRRC CE ROHS

There are three frequency bands you can use:800MHz,1.4GHz, and 2.4GHz. The 2.4GHz has obtained CE and SRRC certification. Users can select the frequency they need through the web page or Maestro Assitant.

*Please select the frequency that complies with local laws and regulations

Frequency hopping mode and fixed mode

With the advanced communication technology, M51 can work on frequency hopping mode or fixed mode. When you need to use up to 4 drones in the same place, please select fixed mode and narrow bandwidth.

Ultra-Low latency when transmitting FHD video

With the advanced CODEC technology, the data latency is below 30ms, the 1080P60 video latency is within 200ms.

There is two working modes of VCAN1643: point mode and repeater mode. When you need to transmit a signal under non-line-of-sight conditions, please select repeater mode. You only need to buy one more air unit and easily set working mode through a web page or Maestro Assistant.

VCAN1643 adopts double encryption technology to ensure the security of wireless video and data transmission. Users can enable this function and set their private code through web pages and software.

VCAN1643 supports most of the gimbals on the market, including HDMI/SDI/CVBS/Ethernet port. The UART supports two protocols: Mavlink and Transparent. The Uart has TTL or RS232 level. Please give us the details when ordering.

VCAN1643 Video Data RC Wireless Transmission System

Plik VCAN1643 Video Data RC Wireless Transmission System jest highly integrated and professional solution designed for modern UAV, warkot, and industrial applications. It allows simultaneous transmission of FHD video, dane, i RC (zdalne sterowanie) signals, providing a comprehensive wireless link that meets the demanding requirements of drone operators and aerial professionals.

---

Highly Integrated “All-in-One” Transmission

VCAN1643 is an all-in-one wireless transmission solution. Plik jednostka powietrzna is equipped with HDMI, SDI, CVBS, and Ethernet ports, enabling video input from a wide range of cameras and sensors. Plik ground unit provides HDMI and Ethernet outputs, allowing live video monitoring on monitors or control stations. Dodatkowo, the system includes two UART ports and an SBUS port, enabling transmisja danych, telemetria, and RC signals to be transmitted simultaneously with video. This integration reduces the need for multiple separate systems, streamlining drone operations and enhancing reliability.

---

Long-Distance Transmission Capabilities

The VCAN1643 system supports ultra-long-range transmission. Plik M50 model provides a maximum transmission distance of 7 km, while the M51 model extends coverage up to 17 km, under ideal linia wzroku (THE) conditions. This makes it suitable for pomiarowe, mapowanie, inspection, and cinematography drones where long-range, stable transmission is critical.

The system operates on three frequency bands: 800 MHz, 1.4 GHz, i 2.4 GHz, allowing users to select the most suitable frequency for their environment. Plik 2.4 Pasmo GHz is certified with CE and SRRC standards, ensuring compliance with international safety and wireless communication regulations. Users can configure the frequency via the web interface lub Maestro Assistant software, but it is essential to select frequencies that comply with local laws and regulations.

---

Flexible Communication Modes

VCAN1643 supports frequency hopping mode i fixed mode to optimize performance in different scenarios. When operating multiple drones in close proximity, fixed mode with narrow bandwidth is recommended to minimize interference and maximize link stability.

The system supports point-to-point mode as well as repeater mode. Repeater mode is particularly useful for brak zasięgu wzroku (NLOS) conditions, such as urban environments or complex terrain. By adding an additional air unit, users can easily extend transmission coverage while maintaining stable video and control signal integrity. The configuration is simple and can be performed through the web interface or Maestro Assistant.

---

Ultra-Low Latency Performance

VCAN1643 features advanced CODEC technology, ensuring that data latency remains below 30 ms, i 1080P60 HD video latency stays within 200 ms. This low-latency performance is critical for real-time FPV control, precision drone operations, and live broadcast applications, where even minor delays can impact operational effectiveness.

---

Robust Security

The system implements double encryption technology, providing secure transmission of video and data. Users can enable encryption and set private codes through the software or web page, ensuring that sensitive information remains protected from unauthorized access or interference.

---

Wide Compatibility

VCAN1643 is designed to support a variety of gimbals and camera systems on the market. It is compatible with HDMI, SDI, CVBS, and Ethernet video ports, while the UART ports support both Mavlink and Transparent protocols. The UART interface can operate at TTL or RS232 levels, depending on the user’s requirements. Customers should provide detailed specifications when placing an order to ensure optimal integration with their UAV or ground equipment.

---

Aplikacje

Due to its long-range, low-latency, and high-reliability design, VCAN1643 is ideal for:

• Industrial drone inspections, including pipelines, linie energetyczne, i infrastruktura
• Surveying and mapping operations
• FPV drones for cinematography
• Live broadcasting from UAVs or mobile platforms
• Situations requiring secure, simultaneous transmission of video, telemetria, and control data

---

Streszczenie

Plik VCAN1643 Video Data RC Wireless Transmission System jest professional, all-in-one solution for modern UAV operations. It integrates FHD video, dane, and RC signals, obsługuje multiple frequency bands, offers bardzo niskie opóźnienia, and ensures secure transmission. Its flexible interfaces, multi-mode operation, and long-distance performance make it a versatile choice for industrial drones, cinematic drones, and other demanding aerial applications. By combining robust security, high compatibility, and advanced communication technology, VCAN1643 provides operators with a reliable, high-performance wireless transmission system for complex and professional UAV missions.