COFDM модулатор Демодулатор на модул енкодер Декодер HDMI CVBS AV влез AES 256 FHD RF стриминг
Содржина
Another side view
COFDM Encoder module, CVBS / HDMI влез, IP output
For More details about the COFDM encoder board, please visit here
COFDM Encoder module Advantage:
- Ултра ниска латентност H.265/H.264 аудио и видео кодирање максимална поддршка 1080P@60 видео снимање и кодирање во реално време
- HDMI или AV аудио и видео влез, по кодирањето, излезот за етернет порта или модулот Излез во безжичен, Брзината на битови за кодирање видео може динамички да се конфигурира
- Поддршка аудио влез и излез на аудио декодирање
- Поддржете две видеа (HDMI + AV) симултано влезно кодирање (опција, стандардното е HDMI или AV кодирање, изберете еден од два влезни извори). )
- Веб интерфејс или команда за сериска порта UART AT за управување со конфигурации
COFDM transmitter module
COFDM modulator-demodulator datasheet download
COFDM demodulator Vcan1776RX-H264 datasheet
The last version of the TX RX board
Соединетите Американски Држави: V6.5.6p
RX: 4.1.2стр
Најчесто поставувани прашања
- Question1: Could you please tell me part number of this component, we try to find localy and check. одговор 1: It is a inductance named LOH32PN2R2NNC.
- Suggest Check Points: If the power supply current of the board is well but there is no RF output, maybe the below component TC1-1-13MX+ is generally damaged.
- In order to avoid damage to this device during transportation (the device itself is relatively high), we ordered red glue protection for this device when we shipped it.
- The engineer also suggests that you check to see if the cable is loose or in poor contact.
- Please try to replace the FPC cable connecting the two boards
- We can provide spare parts if you're sure which one.
Секако
Ве молиме проверете ја врската подолу.
Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command
3. прашање, If our camera quality is good enough for both 4 MHz и 8 MHz пропусен опсег. Во овој случај, Should the customer choose 4 MHz или 8 MHz?
одговор: Our one-way COFDM shipments use 4Mz wireless bandwidth by default, corresponding to a video bit rate of 3.12Mbps, which is enough for 1080p; If changed to 8MHz wireless bandwidth under the same conditions, the video bit rate doubles to 6.24Mbps. All customers can choose between wireless bandwidth 4MHz and 8MHz, even 6MHz can also be considered.
4. прашање: Which is better for this tx+rx set from a receive sensitivity view?
одговор: For wireless links, it can be simply considered that the receiving sensitivity will be higher at lower wireless bandwidths. From the perspective of receiving sensitivity, 4MHz>6MHz>8MHz
Секако
Ве молиме проверете ја врската подолу
COFDM Relay Repeater модул за безжичен видео предавател и приемник на дрон UAV Vcan1870
Single channel receiving sensitivity:
-97+/-1dBm at QPSK 8MHz,
-98+/-1dBm at QPSK 6MHZ,
Sensitivity increased by 3dbm when receiving with dual antennas
The receiver default firmware supports RTSP player, some clients prefer UDP player, which we also can offer, then RTSP player doesn't support. (RTSP and UDP can only choose one of the two firmware)
Ве молиме преземете на линкот подолу.
Splayer_v4.2_2020.6.6
https://drive.google.com/file/d/1ihzUhfnx2Wo3zLO8UAs1aUQeLswonJD-/view?usp=sharing
Splayer_v4.3_2022.10.22
https://drive.google.com/file/d/1PQc-LZ55qGnjeMsjkHYSloHfY3NEUsGH/view?usp=drive_link
Секако, ве молиме проверете ја сликата подолу.
How to switch HDMI or CVBS video input via the UART AT command?
How to upgrade the COFDM video receiver
How to upgrade the COFDM drone video encoder modulator board
Осврти
Нема рецензии уште.