Disclaimer
- Please read the user’s manual carefully before use. Be sure to pay attention to the warnings and understand all points completely.
- Please strictly abide by the local radio frequency management regulations.
- Please follow the installation steps in the manual to use this product. Our company and agent will not take legal responsibility for the damage of equipment or personnel caused by the installation and modification of users.
- This copyright of this manual belongs to Great Mainlink Tech Co., LTD. No one may make copies without written consent.
ຂໍ້ຄວນລະວັງ
Attention to installation
1. Before power on, make sure the antenna connection is reliably . ຖ້າບໍ່ດັ່ງນັ້ນ, it will cause damage to the device.
2. Make sure that the voltage is within the range of use.
3. Please pay attention to the EMC of all the electronic equipments on your drone.
4. It is recommended that the antenna should be installed downward and keep the antenna away from the metal on the drone.
5. Make sure to use the matching antenna.
Before use
1. Make sure that all cables are connected correctly and firmly.
2. No foreign objects (e.g. liquids, sand, ແລະອື່ນໆ) can be entered inside the device.
3. It takes 15 seconds for the device to start. Video and data cannot be transferred until the device has finished booting.
4. Please ensure that the environment in which the equipment is used is free of other electromagnetic interference.
5. When the signal weakens, you can improve the effect by changing the heading direction of the antenna.
ບັນຊີລາຍຊື່ຈໍານວນບັນຈຸ
Device X 2
ພາບລວມ
Industry drone market is developing very fast in recent years. The fight time and distance of drones are getting longer and longer. MK22/MK55, a long-range wireless transmission system, is designed for VTOL fixed wing and other long-range drones. The system can transmit video, fight control data, ຂໍ້ມູນຄວບຄຸມ gimbal, and RC data simultaneously. With the advantage of high level intergration and powerful function, MK22/MK55 is a typical good product to meet long-range transmission requirements.
There are two frequency bands——800MHz、1.4GHz and 2.4GHz. Users can choose according to their needs. Please choose the suitable frequency band according to local regulations.
MK22 can transmit data and video to 22km, MK55 can transmit data and video to 55km, making it very suitable for long range drone.
If you use our recommend ground station, you only need one cable with connector to connect the device and your ground station.
*1Test under LOS and no interference conditions。
ຄຸນລັກສະນະ
Long distance Modulation
-MK22 Up to 22km @ LOS– OFDM
-MK55 Up to 55km @ LOS
Video interface Data interface
– Ethernet *1 – UART(TTL/RS232)/SBUS,
Hopping/Fixed Frequency ຍ່ານຄວາມຖີ່
-Fixed: user defined – 800MHz/1.4GHz/2.4GHz
-Hopping: ອັດຕະໂນມັດ Working mode
BW – Air unit can be :Point to point mode
-5/10/20 MHz Repeater mode
Work temperature Power range
– 40℃ ~ + 70 ℃ – DC 9~28V Battery 3S~6S
M52 Interface Description
ຫນ່ວຍອາກາດ
side view
Ethernet
ຈໍານວນ | Character | ຄໍາອະທິບາຍ | Input/Output |
1 | T+ | TX+ | ການ |
2 | T- | TX- | ການ |
3 | R+ | RX+ | ຂ້າພະເຈົ້າ |
4 | R- | RX- | ຂ້າພະເຈົ້າ |
2. UART1
ຈໍານວນ | Character | ຄໍາອະທິບາຍ | Input/Output |
1 | G | GND | I/O |
2 | R | RS232 RX | ຂ້າພະເຈົ້າ |
3 | T | RS232 TX | ການ |
3. UART2
ຈໍານວນ | Character | ຄໍາອະທິບາຍ | Input/Output |
1 | G | GND | ການ |
2 | R | TTL RX | ຂ້າພະເຈົ້າ |
3 | T | TTL TX | ການ |
4. ພະລັງງານ
ຈໍານວນ | Character | ຄໍາອະທິບາຍ | Input/Output |
1 | G | GND | I/O |
2 | V | +Vcc(9v~28v) | ຂ້າພະເຈົ້າ |
5. SBUS1
ຈໍານວນ | Character | ຄໍາອະທິບາຍ | Input/Output |
1 | ສ | SBUS OUT | ການ |
2 | V | +5v(I max 1A) | ການ |
3 | G | GND | I/O |
6. SBUS2
ຈໍານວນ | Character | ຄໍາອະທິບາຍ | Input/Output |
1 | ສ | SBUS OUT | ການ |
2 | V | +5v(I max 1A) | ການ |
3 | G | GND | I/O |
7. ຕົວຊີ້ວັດພະລັງງານ
This indicator is solid green when air unit is booting.
8. ຕົວຊີ້ວັດການເຊື່ອມຕໍ່
LED Pattern Description |
solid green Wireless link is established |
light off Wireless link is lost |
9. Status Indicator
LED Pattern(Blink only in booting) Description |
Blink 2 times Initialization OK, Frequency is 1.4GBlink 1 time Initialization OK, Frequency is 800M |
Blink 3 times Switch mode (Swith from air to ground, vice verse) |
Blink slow all the time Enter configuration mode |
Blink fast all the time Device abnormal |
10. SMA antenna connector.
- Fiber glass antenna.
- OLED display.
- ຫມໍ້ໄຟ
- Connector.
ຈໍານວນ | ຄໍາອະທິບາຍ | Input/Output |
1 | Rx+ | ຂ້າພະເຈົ້າ |
2 | Rx- | ຂ້າພະເຈົ້າ |
3 | Tx+ | ການ |
4 | Tx- | ການ |
5 | UART1 TX (RS232) | ການ |
6 | UART1 RX (RS232) | ຂ້າພະເຈົ້າ |
7 | UART2 TX (RS232) | ການ |
8 | UART2 RX (RS232) | ຂ້າພະເຈົ້າ |
9 | NC | |
10 | RC1_IN | ຂ້າພະເຈົ້າ |
11 | RC2_IN | ຂ້າພະເຈົ້າ |
12 | +5v | ການ |
13 | GND | I/O |
14 | GND | I/O |
15 | GND | I/O |
16 | GND | I/O |
17 | GND | I/O |
18 | GND | I/O |
19 | Vcc (9v~28v) | ຂ້າພະເຈົ້າ |
20 | Vcc (9v~28v) | ຂ້າພະເຈົ້າ |
ຂໍ້ມູນ
ປະເພດ | ລາຍການ | ລາຍລະອຽດ |
Wirelessປະສິດທິພາບ | ແຖບຄວາມຖີ່ | 800MHz/1.4GHz |
ລະດັບຄວາມຖີ່ | 800MHz:806MHz~825MHz1.4GHz:1427MHz~1447MHz2.4GHz: 2400~2480MHz | |
Band width | 5MHz/10MHz/20MHz | |
Modulation | OFDM | |
EIRP | MK22: 30dBm±1dBMK55: 33dBm ± 1dB | |
ທີ່ລະອຽດອ່ອນ | ≤-95dBm | |
Range | MK22: 22kmMK55:55km*1 | |
ອັດຕາບິດ | 30Mbps @ 20MHz | |
ຊ່ວງພະລັງງານ | DC 9 ~ 28V | |
ການນໍາໃຊ້ພະລັງງານ | ≤8.5W | |
ການໂຕ້ຕອບ | ສາຍອາກາດ | ໂຮງຮຽນສູງ *2 |
ພະລັງງານ | XT30 | |
UART | TTL 3.3V,1 bit ການເລີ່ມຕົ້ນ, 8 ຂໍ້ມູນ bit, 1 ຢຸດ bit, ບໍ່ມີ parity., ອັດຕາ Baud 115200 (ຄ່າເລີ່ມຕົ້ນ),57600, 38400, 19200, 9600 | |
UART1 ແລະ UART2 | ||
SBUS | SBUS_IN | |
SBUS_OUT | ||
Ethernet | 4 Pin | |
ປຸ່ມ | 1 | |
ສະຫຼັບ | ສໍາລັບການປ່ຽນອາກາດແລະພື້ນດິນ | |
ສາຍອາກາດ | ການໂຕ້ຕອບ | ໂຮງຮຽນສູງ |
ປະເພດ | ອາກາດ:Glue stick antenna 20cmGround:Fiber glass antenna, penal antenna | |
ປະເພດຂົ້ວ | ຕັ້ງ | |
Gain | ອາກາດ:2.5dBiGround:12dBi | |
ຫລາກຫລາຍ | ≤2.0 | |
ສະພາບແວດລ້ອມ | Work temperature | -40℃ ~ + 70 ℃ |
ອຸນຫະພູມການເກັບຮັກສາ | -40℃ ~ + 85 ℃ | |
ຄວາມຊຸ່ມຊື່ນ | 5~ 95%,ບໍ່ຂົ້ນ | |
ຮູບລັກສະນະ | ຂະຫນາດ | 112 X 63.5 X 19 mm |
ນ້ໍາຫນັກ | 143g |