- Origine: CN(Origine)
- Pacchetto: SÌ
- Applies to: For iOS Android iPad phone DSLR Video
- Applies to1: for DSLR Camera Gimbal iPad phone
- Applies to2: for Crane 2S 3S Weebill S Gimbal Stabilizer & Fotocamere
- Applies to3: for Camera Image Wireless HD Video Transmitter Receiver
- Applies to4: For Canon Sony DSLR Camera
- Features: 4TX and 1RX 800 M/2625FT
- Features1: Ci sono 10 wireless channels to choose from.
- Features2: No delay, no compression
- Features3: Two send one receive or four send one receive
wireless video transmission HDMI SDI 1080P transmitor 4TX and 1RX 800 Sistema di trasmissione video wireless M/2625FT hd sdi
main feature:
1. The maximum transmission visual distance can reach 800m (about 2600ft).
2. 10 wireless channels are available for free selection.
3. No delay (<1ms/less than 1ms), no compression (visual lossless).
4. 4 sending and 1 ricevere.
5. The receiver power supply supports the redundancy function, which can be powered by the battery and the DC power supply at the same time, seamless switching, the four receiver power supplies are independent, and damage to one channel will not affect other channels.
6. Wide voltage input (9-18VCC).
7. Funzionamento semplice, facile da trasportare, no need to disassemble the antenna, you can use it after taking it out
Detailed description of wireless video transmission system
Formato video: 1080fps 60/50/30/25/24/23.98/29.97/59.94
1080PsF 24/25/1080i 60/50/720fps 60/50/59.64/480i/P 60(NTSC)/576i/P 50(AMICO)
Ritardo: no delay (<1ms less than 1ms)
Audio: SDI/HDMI built-in 24 bit/48KHz PCM
Frequenza operativa: 4.9-5.9GHz suitable for Asia, the United States, Europa, etc.
Potenza RF: <18dBm
Distanza di trasmissione: Up to 800m (about 2600ft)
Larghezza di banda: 40MHz/set
Anti-interferenza: can coexist with WIFI 5G mobile phones, etc.
TX input voltage: 9-18A DC
RX input voltage: 9-18A DC
Potenza TX: <7 watt
RX power: <30 watt
TX screen: 0.96 OLED da pollici
RX screen: 0.96 OLED da pollici
Temperatura di lavoro: -10~50°C
TX size: (length x width x height): 130×69×24mm
RX size: (Length x Width x Height): 305×310×55mm
Aggiornamento: Upgrade the firmware through the Mini USB interface
Installazione: 1. TX comes standard with F970 battery gusset, 2pin lemo,
2. RX comes standard with a V-shaped battery gusset and a 2pin lemo.
3. Texas “1/4” RX “1/4” “3/8” PTZ screw hole.
Wireless video transmission system channel setting (Texas)
The transmitter and receiver channels must be set to the same channel (our product has 10 canali (0~9), 234569 è preferito)
1. TX channel setting method
Passaggio 1: Press the power switch to start TX.
Passaggio 2: Long press the “MENU” button on the transmitter until the display is unlocked and released.
Passaggio 3: Fare clic su “+” O “-” button to select the channel, and then click the “MENU” button to confirm
recognition.
Passaggio 4: The transmitter channel is set successfully.
Wireless video transmission system channel setting (RX)
RX channel setting method
Passaggio 1: Start the receiving end.
Passaggio 2: Long press the “MENU” button on the receiving end until the display is unlocked and released.
Passaggio 3: Usa il “<>” button to select the channel, and then click the “MENU” pulsante
to confirm.
Passaggio 4: The receiver channel is set successfully.
Wireless video transmission system function introduction
The standard list of the wireless video transmission system
Transmitter TX: 4
Ricevitore RX: 1
5G antenna:12
Power cord: 4
SDI connection line: 4
Hand of Universal Monster: 2
PTZ adapter screw: 1
Power adapter: 1
Product standard list: 1
Aviation suitcase: 1
Outer packing carton: 1
Staffa: 1
M6 hand lemon screw: 1
1/4 Torx hand lemon screws: 4
Bracket firmware screw M8:1
Reviews
There are no reviews yet.