30Km long distance COFDM HDMI Wireless Video Transmitter FAQ
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T

Table of Contents
Caratteristica
- Altamente integrato, design combinato modulare
- Utilizzando la tecnologia di modulazione COFDM, H.264 image coding technology
- It can transmit one channel of 1080P HDMI (optional SDI) segnale
- Lower delay, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 millisecondi.
- Comunicazione a tutto tondo, non ha paura di costruire muri
- High-speed communication between traveling, the maximum moving speed can reach 600 km/hour.
- Transmitter heat sink type aluminum case, antiurto, Waterproof case is optional.
- Support LOS and Non-line-of-sight (NLOS) trasmissione mobile
- The distance is not less than 30 kilometers under the condition of line-of-sight ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- Synchronous reception of audio and video signals, high-definition HDMI1080P multi-format optional, standard-definition output DVD image quality
- The receiver can realize video recording and backup functions
- 128-bit AES encryption and decryption
- Personalizzazione completa disponibile
- Upgrade tool: Parametro Configura scheda
- Utilizzo: UAV, Veicoli & UGV
- Modulation: COFDM
- Working voltage: DC11V-DC13V
- Corrente di lavoro: 0.5~2W (depending on different PA)
- Potenza di trasmissione: 0.5W~20W optional
Applicazione
This product is mainly used in the technical reconnaissance and evidence collection of public security and safety inspection departments, real-time image transmission of unmanned aerial vehicles, unmanned ships, radio and television relay, radio and television live broadcasts: broadcast field, trasmissione sportiva, notizie sociali, air live, studio, mountaineering Expedition, and other aspects. It is suitable for real-time mobile transmission of high-quality images in various complex environments such as urban areas, mari, e montagne.
Specifiche del trasmettitore
| modulation method | COFDM |
| tensione di lavoro | CC 11 V ~ CC 13 V |
| working current | 0.5 Watt: ≤0.6A DC12V, 1 Watt: ≤0.8A DC12V, 2 Watt: ≤1,5 A CC 12 V 5 Watt: ≤3,0 A CC 12 V 10 Watt: ≤5.0A DC12V 20 Watt: ≤7.0A DC12V |
| control interface | standard RS232 interface, 8 Bit di dati, 1 Stop Bit, Parity Bit, Velocità di trasmissione: 19200 |
| transparent data interface, | a one-way transparent serial port transmission, 8 Bit di dati, 1 Bit di arresto, support Odd Parity, Parity Bit, Wireless Parity, Velocità di trasmissione: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
| metodi di crittografia | support 128-bit encryption |
| mappatura della modulazione | QPSK (4QAM), 16QAM, 64QAM |
| correzione degli errori in avanti | 1/2 2/3 3/4 5/6 7/ 8 |
| Intervallo di guardia | 1/32 1/16 1/8 1/4 |
| Numero del vettore | 2K |
| Larghezza di banda di frequenza | 2 / 3 / 4 / 5 / 6 / 7 / 8M Adjustable |
| transmission code stream | 2000kbs~20000kbs Adjustable |
| trasmettere potenza | 0.5 / 1 / 2 / 5 / 10 Watt |
| frequenza di trasmissione | Any Frequency Customizable, Step 1MHz |
| a power flatness | within10MHz bandless than 0.2dB |
| ratio of shoulder | the output power of 27dB, shoulder ratio is better than -30dB |
| the second harmonic | ≤-45dB |
| MER | 32Db |
| video in ingresso | 720×480 60IO(NTSC), 720×576 50IO(AMICO), 720 50P, 720 60P, 1080 50IO, 1080 60IO, 1080 24P, 1080 25P, 1080 30P, 1920X108050P, varie modalità sono adattive. |
| Interfaccia HD | HDMI, SDI optional |
| formato di codifica video | H.264 |
| protection standard | all-aluminum radiator-type chassis, anticorrosione, design antiurto |
| Overall size | 9 X 6.4 X 2.3 cm |
| Overall weight | ≤0.20KG |



Receiver Specification
| Machine Rack-mounted multi-bandwidth HD receiver parameters | |
| Ricevere la gamma di frequenza | 170-860VHF MHz&UHF |
| larghezza di banda di frequenza | 2/3/4/5/6/7/8MHz, opzionale |
| Livello di ingresso RF | -94dBm~-15dBm (8Larghezza di banda M)/-98dBm ~-15dBm (2Larghezza di banda M) |
| Impedenza di ingresso RF | 50 ohm |
| Connettore di ingresso RF | N-head |
| demodulation mode | COFDM |
| constellation mode | QPSK, 16QAM, 64QAM (opzionale) |
| correzione degli errori in avanti | 1/2, 2/3, 3/4, 5 /6,7/8 (opzionale) |
| carrier number | 2k, |
| intervallo di guardia | 1/32, 1/16, 1/8, 1/4 (opzionale) |
| decodifica video | MPEG-2MP@ML/H.264 |
| proporzioni | 4: 3 16: 9 |
| video image is | 720 * 576 @ 8MHz 1080P @ 60P |
| audio output mode | stereo unbalanced 300 / 200mv |
| uscita audio | output2Audio + 2Uscita video |
| operating voltage | AC220V / CC 12 V <0.5UN |
| Temperatura operativa | – 20℃~+50℃ |
| Dimensione dell'aspetto | 480*260*45 (1U) chassis |
| peso dell'attrezzatura | 1.5kg (two-way language 2.5Kg) |
Nota: the default connector is HDMI, if you need the cheaper model, a connector for CVBS Yellow video connector 720p HDMI, Per favore Check here per un altro modello.
Description:
– Questo dispositivo adotta la tecnologia COFDM, che integra l'antenna di trasmissione, modulazione digitale, audio, and video function.
– Dimensioni compatte, piccolo calore, e lungo raggio di trasmissione
– compatibile con una piccola fotocamera, potrebbe consentire l'acquisizione e la trasmissione di immagini HD
– il raggio di trasmissione sarà più lungo se adotta un'antenna ad alto guadagno
– Gamma di trasmissione: 5000M (senza alcuna interruzione)/500M con ostacoli interrotti
Features:
– Dimensioni compatte, progettazione della modulazione
– Adopts COFDM modulation technology, Tecnologia di compressione delle immagini MPEG-2
– Comunicazione omnidirezionale
– la comunicazione ad alta velocità consente la trasmissione audio e video in tempo reale
– An aluminum case that is shockproof
– Trasmissione NLOS
Specifications:
Trasmettitore:
– Misurare:90x64x23 mm
– peso:200g
– antenna:22mm
Ricevitore
– misurare: 87x70x20 mm
– peso:200g
– Altezza dell'antenna:42.5cm (potrebbe essere piegato)
Specifica tecnica
– Modulation: COFDM
– tensione di lavoro: DC11V-DC13V
– Corrente di lavoro:0.5W: meno di 0,6 A a 12 V CC
– porta di controllo: porta RS232 standard. 8-bit di dati, 1-un po' basta, Velocità di trasmissione:19200, supportare il controllo di parità dispari
– porta dati di trasmissione:8 bit di dati,1 un po' basta, Velocità di trasmissione,1200,2400,4800,9600,19200,38400,57600,115200,230400
– Encryption: supporto 128 crittografia
– Mappatura della modulazione: QPSK (4QAM),16QAM,64QQAM
– Correzione degli errori in avanti: 1/2,2/3,3/4,5/6,7/8
– Proteggi l'intervallo: 1/32,1/16,1/8,1/4
– Numero del vettore:2K
– Larghezza di banda di frequenza:2/3/4/5/6/7/8M regolabile
– flusso di trasporto:2000kbs-20000kbs regolabile
– potenza di trasmissione: 2W
– frequenza di trasmissione: potrebbe essere personalizzato, il passo è 1 Mhz
– planarità del potere: meno di 0,2 dB entro 10 Mhz
– Seconda armonica: meno di -45 dB
– MER:32db
– video in ingresso:1Vp-p,75ohm
– Formato del programma video: MPEG-2
– Qualità video: 720×576 quando superiore a 4M
– Formato: È possibile impostare NTSC e PAL
Specifiche tecniche del ricevitore:
– Gamma di frequenza del ricevitore: 170-860Mhz, VHF e UHF
– Larghezza di banda di frequenza: 2/3/4/5/6/7/8 Mhz, regolabile
– Livello di ingresso RF:-94dbm-0dbm a 8M/-98dbm-0dbm a 2M
– Impedenza di ingresso RF: 50ohm
– Porta di ingresso RF: SMA
– modulazione: COFDM
– Il modo delle costellazioni: QPSK,16QAM,64QAM opzionale
– Correzione degli errori in avanti: 1/2,2/3,3/4,5/6,7/8 opzionale
– Numero del vettore:2K
– Divario di protezione:1/32,1/16,1/8,1/4
– Frequenza dello schermo:4:3,16:9
– immagine video:720×576 @6Mhz
– Porta di uscita audio e video: standard 3.5 porta
– Working voltage: CC 12 V 0,3 A
Il pacchetto include:
– 1 x trasmettitore
– 1 x ricevitore
– 1 set di accessori
30Km long distance COFDM HDMI Wireless Video Transmitter
FAQ
Domanda 1: I need at least a 30km range from air to ground for the UAV UGV USV.
Answer 1:Our system supports it, it should use a 2W power amplifier, it is better to use the special long transmitter antenna and two higher receiver antennas.
COFDM-912T VS COFDM-908T


Domanda 2: How far can I get if I use the transmitter and receiver both on the ground?
Answer: On ground use, the transmitter and receiver must have a certain height difference to transmit long distances.
The longest distance is only 2.5 kilometers if the transmitter and receiver are both at the same height on the ground. Please see our test video; because the transmitter and receiver are placed at different levels, one side is at the mountain, another side is at the seaside, we used the default two watts to transmit 27 chilometri.
Domanda 3: Does it support a working environment of -20 gradi?
Answer: SÌ, supportato
Domanda 4: I want to buy modules and built-in my devices, please tell me the dimension of that modules.
Answer: SD model: 6X7X1.6cm, HD model: 5X7X1.6cm
Domanda 5:Do you have any special case shells for marine use?
Answer: SÌ, Si prega di controllare l'immagine qui sotto. (For the transmitter with a three-proof shell, impermeabile, antiurto, spray antisale, 防水,防震,防盐雾)

Precautions for order customization
- Frequency: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- Antenna length: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 O 1.8 meters optional)
- Tipo di antenna:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.


Domande frequenti
Q. What is the video resolution?
UN: HDMI1080P.
Q. Does the transmitter power current is high?
UN: Per Trasmettitore, the different PA (amplificatore di potenza) dentro, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
Per Ricevitore, the current is only 0.3UN (300mA)
Q: Like we only need 10km, how much PA is recommended?
UN: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 chilometri. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
UN: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
UN: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610Mhz).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
UN:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
UN: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
For example, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, etc.
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 metri.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
| PA | LOS | NLOS |
| 500mW | >10Km | <300M |
| 1W | >30Km | <500M |
| 5W | >60Km | <1500M |
| 20W | >120km | <3000M |
| 50W | >200Km | <5000M |
| 100W | >250Km | <10Km |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50P. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. For example, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 hours.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Perché COFDM è una trasmissione unidirezionale, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. That is to say, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- SÌ, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
-

military cofdm wireless video transmitter -

military cofdm wireless video transmitter with yagi directional antenna FRP omnidirectional antenna
- SÌ, we can build the transmission of telemetry and video in COFDM-908T.
-
- The below model of transmission of telemetry is recommended.
- https://ivcan.com/p/digital-data-link-for-drones-and-robotics/
-

Digital Data Link for Drones and Robotics bi-directional wireless transmission module

- Primo, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 watt. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Di seguito vengono riportate alcune corrispondenze tra la potenza in uscita ed i parametri dBm visualizzati dallo strumento.
- 20mW è 13 dBm
200mW è 23 dBm
1 I watt sono 30 dBm
2 I watt sono 33 dBm
5 I watt sono 37 dBm
10 I watt sono 40 dBm
20 I watt sono 43 dBm
50 I watt sono 47 dBm
100 I watt sono 50 dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
SÌ, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080@50P, 1080@30P
Attualmente, non supporta 1080i, nor does it support 4K transmission.

SÌ, IL COFDM Video Transmitter frequency range can cover 1500Mhz, IL Ricevitore video COFDM frequency range only cover 170-860Mhz, in order to reach other range, we have to use the frequency down converter on the RF input.


20km sul mare Test del trasmettitore e ricevitore video wireless HDMI per barca o da riva a nave

A lungo raggio 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply

A lungo raggio 50 Amplificatore di potenza in Watt Transmitter and Receiver
Manuale dell'utente
Posta relativa
| Peso | 5 kg |
|---|---|
| Amplificatore di potenza | 0.5W, 1W, 2W, 5W, 10W, 20W, 50W |







Reviews
There are no reviews yet.