How to upgrade wireless video transmitter and receiver firmware of TX900

upgrade wireless video transmitter and receiver firmware

Models for which the upgrade program applies

Upgrade Firmware Download

This v1.5.0 version of the firmware adds TCP server support to the D2 and D3 serial ports (configured through the webpage), and the customer can upgrade the webpage according to the prompts in the document.

Note: Mgbe nkwalite, the original parameters of the customer (such as IP address) remain unchanged. Download the upgrade wireless video transmitter and receiver firmware.

update_image_v1.4.3_fixup_2023.1.4

update_image_v1.5.0_2022.12.13

dlm_update_image_v2.5.2_2023.11.1

Upgrade Firmware Steps

1. Connect the transmitter or receiver to the computer through a network cable, enter 192.168.1.11 in the browser of the computer (if you have not modified the default IP address), enter the Web server, and switch the system page.
2. 
3. Click the button next to “Upload file”, and select the upgrade file (be careful not to unzip it).
4. 
5. After selecting the file, click the Upload button to start uploading the upgrade firmware.
6. 
7. A prompt box will pop up if the firmware is uploaded successfully. , and the size of the uploaded file is displayed.
8. 
9. After confirming that the file size is correct, click the Upgrade button to start upgrading the firmware (be careful not to disconnect the power of the device after starting to upgrade the firmware).
10. 
11. After the device is upgraded, there will be a prompt message and it will restart automatically.
12. 

What’s new in each version of upgrade wireless video transmitter and receiver firmware？

ụdị 1.1(2021.4.29)

1. Modify the implementation logic of door-to-door transparent transmission (from the perspective of customers)
2. Modify the default value of m_packet to 400
3. Separation of sending/receiving ports for door-to-door transparent transmission

ụdị 1.2(2022.4.2)

1. Add higher serial port baud rate support
2. Added reboot support to the System page
3. 3-color led marquee prompt at startup (convenient for production testing
4. Make the CFG drop-in use the same as the module’s own drop-in

ụdị 1.3(2022.4.25)

1. Add mesh support

ụdị 1.4(2022.8.23)

1. Improve audio processing
2. 2022.9.30 Disable the D3 serial port mode switching function
3. 2022.10.20 Improve the mesh configuration
4. 2022.11.24 Add AT^CONFIG command for internal hidden configuration

ụdị 1.5(2022.12.15)

1. Added TCP server support for D2 and D3 serial ports
2. 2022.12.30: Forbidden to configure web pages to Mesh mode
3. 2023.1.4: Multi-cast prohibits spontaneous transmission.
4. 2023.7.25: Improve fix power processing
5. 2023.8.2: Add TCP server for parameter configuration
6. 2023.9.7: Add IP read and write AT command processing to the TCP server
7. 2023.9.13: Added customer setting switch and TDD uplink and downlink configuration
8. 2023.9.26: Added backup IP (192.192.192.192), supporting Chinese and English switching
9. 2023.10.19: Solve the annoying problem of browser caching web pages.

Do you have any questions about upgrading the wireless video transmitter and receiver firmware, biko kpọtụrụ anyị.

Now the default shipping configuration of the D3 serial port is used as a transparent serial port. How can I need to modify it for AT command interaction?

A na-eji nhazi mbupu nke ndabara nke ọdụ ụgbọ mmiri D3 dị ka ọdụ ụgbọ mmiri na-ebufe ụzọ. Ọ bụrụ na onye ahịa kwesịrị ịgbanwe ya maka mmekọrịta iwu AT, the internal AT command can be sent under the webserver to modify the role of the D3 serial port. The kpọmkwem nzọụkwụ bụ ndị a:

1. Banye na ibe nbipu nke sava weebụ

2. Tinye “AT^CONFIG=1,0,0” iwu na “Na Command” column and the “Ọ DỊ MMA” a ga-eweghachi ngwa ngwa ma ọ bụrụ na ọ ga-aga nke ọma

3. Banye “AT^CONFIG?” iwu na “Na Command” kọlụm iji lelee ọzọ iji gosi ma nhazi ahụ ọ na-aga nke ọma

Note:

1. Mgbe mgbanwe n'elu, ịkwesịrị ịmalitegharịa ike iji rụọ ọrụ
2. Ọ bụrụ na ịchọrọ ịgbanwe D3 ka ọ bụrụ ọdụ ụgbọ mmiri na-ahụ ụzọ ọzọ, jiri dochie iwu AT dị n'elu “AT^CONFIG=0,0,0”.