UAV Wireless Video Data RC Control Link
Ụzọ abụọ ikuku nnyefe dijitalụ data video njikọ modul DLB
Tebulu ọdịnaya
Njirimara
- TDD OFDM ụzọ abụọ ikuku video data RC njikwa njikọ bọọdụ modul
- Band 800MHz / 1.4G / 2.4G: 806~ 826HMz, 1428~ 1448MHz, 24022482Mhz
- nkwado FHSS FHSS Frequency-hopping gbasaa ụdịdị dị iche iche akpaka ugboro hopping
- bandwit: 3MHz, 5MHz, 10MHz, 20MHz, selectable
- Oke 30Mbps @ 20MHz bandwit
- RF nnyefe ike: 25± 2 dBm
- ìgwè kpakpando: QPSK, 16QAM, 64QAM, nnwere onwe
- uche: -106dBm(2.4GHz 1Mbps), -108dBm(1.4GHz 1Mbps), -108dBm(800MHz 1Mbps)
- Na-akwado nnyefe data IP transperent(2 ọdụ ụgbọ mmiri IP)
- Na-akwado nnyefe data serial(3 X RS232 UART ma ọ bụ TTL)
- na-akwado ntinye na ntinye ọdịyo na codec n'ụgbọ
- Na-etinyeghị ihe Amplifier ike mpụga, Nkwado ruo 17km LOS (UAV-na-ala) na 2km LOS (ala-na-ala)
- Weebụ UI ma ọ bụ Oghere Usoro UART maka njikwa
- AES128 izo ya ezo na decryption
- njikwa iyi na-agbago na mgbada ala
- Nzikọrịta ụdị netwọkụ: mgbe na-ebe, otu isi-na-ọtụtụ isi, ọtụtụ isi-na-otu isi, Njikọ IP mesh (nhọrọ)
- ike oriri: <4.5W
- akụkụ: 58*64*13mm (CAD dimension file)
- ibu ibu:32g
- ọrụ temp. -20℃ ~ +65 ℃
- Okpomọkụ nchekwa. -40℃ ~ +80 ℃
- Dual poolu ebunye na-enweta, MIMO mode nke ọrụ
- Mgbanwe ụda olu na usoro: QPSK / QAM16 / QAM64 akpaka mmegharị
- Oke nnyefe ike: 25± 2dBm
- Akwado wireless njikọ izo ya ezo na decryption
- ruo 16 oghere ọnụ enwere ike ijikọ na otu ọnụ etiti etiti.
uche
Frequency Band | 2.4GHz(1Mbps) | 1.4GHz(1Mbps) | 800MHz(1mbps) |
20MHz Bandwit | -99dBm | / | / |
10MHz Bandwit | -102dBm | -103dBm | -103dBm |
5MHz Bandwit | -104dBm | -106dBm | -106dBm |
3MHz Bandwit | -106dBm | -108dBm | -108dBm |
interface akowara okwu
I/O signal
• Na-akwado vidiyo ọwa abụọ n'otu oge | XT30PW-M njikọ, DC in:7~ 30V |
Ethernet1 | 4PIN ZH1.5mm njikọ |
Ethernet2 | RJ45 njikọ |
Data uart1 | 3PIN ZH1.5mm njikọ, TTL 3.3V |
Data uart2 and uart3 | 6PIN PH1.25mm connector, uart3 works as control uart and data uart, TTL 3.3V |
Audio input and output | 4PIN PH1.25mm connector |
USB | Micro USB connector, for software upgrading |
Gbanwee | TX/Rx control signal for outside power amplifier |
Main-Antenna | TX/Rx Antenna port, IPEX |
Second-Antenna | ọdụ ụgbọ mmiri Rx Antenna, IPEX |
12V pụta | On-board 12V out(<150mA), for cool fan power supply |
Power Led | Red, light on normal powered |
Node Led | Acha anụnụ anụnụ, light on when the transceiver module works as a receiver node;
Blink when the transceiver module works as a transmitter node |
Link Led | Light off – indicates that the node is not linked to the wireless network;
Red light – indicates that the node is linked, but the wireless signal is weak; Orange light – indicates that the node is linked, wireless signal is middle; Green light – indicates that the node is linked, the wireless signal is strong. |
Ethernet-1: abụọ na-ụzọ wireless uzo nnyefe netwọk mmiri n'ọdụ ụgbọ mmiri, 4PIN 1.25mm pitch na a nkechi ụgbọelu
RJ45 Ethernet-2: ikuku ụzọ abụọ transperent nnyefe netwọk ọdụ ụgbọ mmiri, 4PIN 1.25mm pitch ụgbọelu ma ọ bụ kpọmkwem 4PIN soldering oghere
Data-UART: bidirectional uzo data Oghere Usoro, TTL 3.3V larịị, 3PIN 1.25mm pitch na a snap ụgbọelu RS232-1/2/3
poolu 1: isi poolu interface, IPEX ụgbọelu
poolu 2: Inyeaka poolu interface, IPEX ụgbọelu. The inyeaka mpi naanị ike natara. Mgbe ejiri modul njikọ vidiyo ikuku a maka nzikọrịta ozi, ọ pụrụ ịbụ okpukpu abụọ-natara ma ọ bụ natara.
ike: Ngwa ntinye ike, na-akwado ntinye voltaji obosara 7 ~ 24V, na oke ike oriri bụ ihe na-erughị 3.5W.
USB: 4PIN 1.25mm pitch ụgbọelu, ma na-emeghe ka ọrụ.
Config UART: 4PIN 1.25mm pitch ụgbọelu, ma na-emeghe ka ọrụ.
Nke a UAV Wireless Video Data RC Control Link module jikoro 58x48mm (ewepu akụkụ nke interface ngwaọrụ inyịme si na nsọtụ nke osisi), n'ihu ngwaọrụ elu bụ ihe na-erughị 3.2mm, azụ ngwaọrụ elu bụ ihe na-erughị 4.5mm, osisi ọkpụrụkpụ bụ 1.6mm, na ibu bụ 31.5g.
Ịnye ọkụ
The ike ọkọnọ mgbaàmà na-egosi na ọnụ ọgụgụ n'elu. The ike input bụ 2 solder oghere ma na-akwado 7 ~ 24V obosara voltaji input. 4A na -enye ọkụ eletrik V n'èzí maka ọkọnọ ike nke onye ofufe jụrụ.
Ethernet na Data
signal egosi
Ethernet-1 ọkụ: Green, a mgbaàmà egosi na netwọk ọdụ ụgbọ mmiri. The netwọk ọdụ ụgbọ mmiri ga-Flash mgbe mgbasaozi data ejikari.
RJ45 Ethernet-2 ọkụ: Green, network n'ọdụ ụgbọ mmiri abụọ mgbaàmà egosi, netwọk ọdụ ụgbọ mmiri ga-Flash mgbe mgbasaozi data ejikari.
Ọkụ ọkụ: red, mgbe niile na mgbe ike nkịtị
Ìhè ike mgbaama: The na-arụ ọrụ ọnọdụ egosi nke wireless njikọ. Mgbe modul na-arụ ọrụ dị ka ohu ọnụ, ma ọ bụrụ na ndị njikọ ikuku na-nwe ọnụ nkịtị, ngosi ga-na. Nke a na egosi bụ ghara ịdị irè mgbe modul na-arụ ọrụ dị ka ndị nna ha ukwu ọnụ.
Audio Input/output define
Anyị UAV Wireless Video Data RC Control Link modul na-akwado codec ọdịyo onboard. Ndị ahịa nwere ike iji ngwa nzikọrịta ozi odiyo/olu/okwu ụzọ abụọ a.
PIN |
Ama |
Description |
Audio n'ime | Ahịrị na ndabara(Ezipụta Mic-in) | The audio will be sent to the target wireless remote module. |
Anụnụ pụta | Ahịrị pụọ, ụgbọala ntị | When the node receives audio data from a remote wireless module, A ga-akpọpụta ọdịyo a na PIN a. |
GND | GND | GND |
Control | Akụrụngwa ngwa ngwa | Njikwa ngbanwu/ gbanyụọ njikwa ntinye ọdịyo |
nkọwapụta
Arụ ọrụ ugboro gbalaga | 1428~ 1448MHz ma ọ bụ 802 ~ 826MHz |
Channel bandwit | 1.4MHz/3MHz/5MHz/10MHz/20MHz |
Mgbanwe ụda olu na usoro | QPSK / QAM16 / QAM64 |
mgbasaozi ike | 300mW, 2W, 5W |
Ụkpụrụ netwọk | mgbe na-ebe, netwọkụ kpakpando n'ụtụ-otu-otu |
Nzipu anya | ọdụ ụgbọ elu 15km, 30km, 50km, 80km, 100km |
data interface | 2 netwọk ọdụ ụgbọ mmiri + 1 ọdụ ụgbọ mmiri |
Ikuku nnyefe ọnụego | kacha 25Mbps, na-akọrọ site na ọnụ niile na nnyefe ụzọ abụọ. |
poolu interface | 2 Njikọ SMA |
Ịnye ọkụ | 7V~30V (recommended 12~28V) |
size | 102*52*21.5mm (PCBA naanị) |
ibu ibu | 127 grams |
Ajụjụ
Ee, biko lelee njikọ vidiyo igbu egbu na youtube.
- Ihe nlereanya a na-akwado ịhazi ọrụ ntupu IP. Enwere nsụgharị atọ: 3km, 10km, na 50km dị ka wuo ike dị iche iche ampilifaya.
- Normal default full duplex link module support relay, you should buy at least three or more units. One unit is the transmitter, one unit as the receiver, and the other unit can put the middle between the transmitter and receiver as the relay/repeater/extender.
Ike nnyefe RF kachasị nke modul njikọ vidiyo ụzọ abụọ a bụ 25± 2 dBm, Anyị na-enyekwa amplifier ike ka iwelie ike RF ruo 2W/5W/10W. Eserese dị n'okpuru na-egosi otu esi etinye ụda ọkụ na mpụga modul njikọ vidiyo dijitalụ ụzọ abụọ.
Ebe ntụtụ IIC_SCL dị na modul?
Ee, Biko lelee ngwaahịa njikọ dị n'okpuru, nke a na-eji igwe vidiyo data ikuku ikuku njikọ modul ụzọ abụọ iji gbakọta, dị nnọọ gbakwunyere ike ampilifaya na ihe mkpuchi na ngwa.
TX900
15km 30km 80km 150km ogologo ikuku vidiyo na-ebufe ihe na-anata nnyefe transceiver PA 2W 5W 10W
Enweghị ọrụ iji jụọ ọnọdụ okpomọkụ nke modul ahụ.
- Chọpụta. Ọ bụ mma.
- The Moningcore CX6600 (L1860C_P2P) is only an electronics module, ịkwesịrị ịmepụta sekit mpụta iji kwado ya, dị ka ike na ethernet na data ntinye ọpụpụ. Ị ga-achọkwa iwere onye injinia sọftụwia ka ọ rụpụta firmware na UI maka gị.
- Dị ka ihe nlele ule, ọ ka mma na ị nwere ike ịzụta ngwaahịa anyị zuru oke iji nwalee. Mgbe ị nwalere ma jiri ha mee ihe, àgwà na-eju afọ, wee gbalịa ịzụta modul ma ọ bụ akụkụ iji mepụta ya n'onwe gị. Ị nwere ike iṅomi anyị imewe ma melite ya ka ọ bụrụ ezigbo ngwaahịa.
- Ka emechara, nke a bụ ngwaahịa mgbasa ozi redio, na ọrụ ọ bụla na-adịghị mma nwere ike igbochi mgbama, na-ebute anya nnyefe dị mkpụmkpụ.
- Chọpụta. support.
- There is no optional frequency band of 2.4G modification on the web page, you need to send AT commands to modify or enter the Morningcore web page to modify.
- Chọpụta. 58*64*13mm.
- If you need further dimension, please download our CAD file at the below link. (maybe you need AutoCAD or other CAD software to open it)
- https://ivcan.com/wp-content/uploads/2023/09/Vcan1681_dimmension.dxf
- Or check the below picture.
ajụjụ: Any recommendations on the PA + link module enclosure? Need an RF cavity filter? minimal box with cooling for the RF transistor?
- What range of the trail sample do you need?
We can offer you a 1~150 km range of the link module. You can add the PA later if you want. Min 15km and max 150km module cost is different. - The module can transfer the signal over 150km with the 10-watt PA to increase the signal. Without the PA, the transmission range is almost 10~15km.
- If you buy one 15km range module, even you plus the PA, the range is almost 15~17 km range. The signal strength and ability of the anti-interference will increase much.
- The Power consumption is about 4W.
- Current equals power consumption divided by supply voltage
- 4 / 12COFDM ikuku nnyefe usoro mgbako ọnụego0.33A, if you're on a 12-volt supply.
Ụdị (Basic)
Port Network: 2X 4PIN
Port Serial Data: 1X TTL Oghere Usoro ọdụ ụgbọ mmiri
Hazie ọdụ ụgbọ mmiri Parameter: 1X TTL
Ihe ngosi njikọ: Nweta naanị njikọ ikuku ọnụ ọnụ
Dimension: 58 * 48mm
DC Port: -
Ọdụ ụgbọ mmiri: -
Njikwa nhazi: Weebụ UI ụzọ;
Ihe nrụnye USB nke izizi, enwere ike gbanwee ka ọ bụrụ ọdụ ụgbọ mmiri site na jumper
Ụdị B (Advanced)
Port Network: 1X 4PIN, 1X RJ45
Port Serial Data: 2X TTL Oghere Usoro ọdụ ụgbọ mmiri
Hazie ọdụ ụgbọ mmiri Parameter: multiplexed na 1 data serial ọdụ ụgbọ mmiri
Ihe ngosi njikọ: Ngosipụta ike njikọ na mgbama
Ihe Ngosipụta Node
Dimension: 64 * 48mm
DC Port: 12~ 28V ntinye. 12Mwepụta V maka ikuku jụrụ oyi
Ọdụ ụgbọ mmiri: Audio codec, kwado ọrụ ọdịyo ụzọ abụọ
Njikwa nhazi: Weebụ UI ụzọ
Hazie ọdụ ụgbọ mmiri
+$50
How to switch frequency of Drone Video Link from 800Mhz, 1.4G, 2.4G
More FAQ
modul nnyefe vidiyo VTX ogologo ogologo
Wireless networking with DLB module
Dị ka ọkachamara na-ebubata ihe TDD transceiver ụzọ abụọ dijitalụ njikọ vidiyo njikọ ụlọ ọrụ sekit osisi na Shenzhen China, Ugboro transceiver TDD anyị sitere na 1428Mhz ruo 1448Mhz nwere antenna. Anyị na-enyekwa TDD transceiver block diagram nhazi koodu mgbasa ozi yana ntuziaka onye ọrụ nkuzi datasheet.
Ngwaọrụ nkọwapụta transceiver TDD anyị nwere onye ọkwọ ụgbọ ala maka ngwaike na ngwaike. Anyị DLM TDD transceiver IC modul sistemu netwọkụ nwere ezigbo nlebanya kacha mma. Ụdịdị Especial Vcan1681 na T17P, ha abụọ nwere ike ịbụ Ntupu IP netwọk iji gboo mkpa ọrụ gị. Ụdị ntupu IP nwere 3km, 10km, na 50km dịka ihe nrụnye ọkụ arụnyere siri dị.