Modul Tautan Data Video Drone UAV Pemancar dan Penerima Video Nirkabel untuk Kamera Transceiver TDD Jarak Jauh Vcan1401 Dua Arah

UAV drone video data link module wireless video transmitter and receiver for camera two-way long-range TDD transceiver lightweight

UAV drone video data link Advantage

1. Berukuran kecil 7.2X4.8X1cm, ringan (kurang dari 60 gram), 2X5-watt PA dimension
2. jarak jauh. Itu omnidirectional fiberglass antenna can reach 30 km. The directional antenna can reach 50km
3. Pada saat yang sama, itu punya 2 dua arah RS232 serial ports, which are convenient for uploading and uploading data. (RS232 only, can not do TTL)
4. The minimum delay can reach 28ms (not including the camera recording and monitor displaying time)
5. 20ms excluding monitor and camera. 1080P 60 about 80ms
6. Menggunakan TDD-OFDM transmission protocol, jarak jauh, a large amount of data, jaringan bebas, stabil dan tahan lama.
7. Using wide temperature components, it can work normally from -40 degrees to 85 derajat
8. IP67 protection can be used in harsh outdoor environments for a long time.
9. Compared with ordinary bridges, the distance is 10 times that of ordinary WIFI transmission protocols.
10. Multiple power supply redundancy designs, keandalan yang tinggi.
11. They are specifically optimized for video streaming.

Aplikasi

1. Main purpose: Cooperate with IP cameras to transmit video data over long-range.
2. Security monitoring: such as agricultural monitoring, pemantauan industri, factory warehouse monitoring, water monitoring, pencegahan kebakaran hutan, mountain monitoring, dll..
3. Internet Segalanya: Ad hoc network data transmission.
4. UAV Drones: imagery, transmisi data.
5. Special industry: power station, pemeliharaan air, dll..
6. Public security and armed police firefighting: miniaturized image transmission can be customized. Misalnya, multiple ad hoc network cameras.

Spesifikasi

1. Frekuensi Kerja: Bawaan 1.4G (1407-1497MHz) atau 2.3G (2310-2380Mhz）band
2. Bawaan 2 * 1Penguat Daya W
3. Catu Daya: 7-18V

Keluaran Masukan Konektor

Mendefinisikan:

kekuatan sinyal	LED P2	LED P3	LED P4
> -70	selalu	selalu	selalu
-71 ke -75	selalu	selalu	-75
-75 ke -80	mati	selalu	selalu
-80 ke -83	pada	-80	and
-83 ke -88	selalu	mati	mati
kurang dari -88	kilatan	mati	mati
tidak ada sinyal	tenda

5, Port Seri Data, 1.25konektor mm, 232 tingkat. (beberapa motherboard hanya memiliki port serial 1, tidak ada port serial 2)

nomor seri	Fungsi
1	GND
2	5keluaran V
3	Serial 2 RX
4	Serial 2 terima kasih
5	Serial 1 RX
6	Serial 1 terima kasih

6, 26Sematkan LNA 0.5konektor kabel fleksibel FPC mm, didefinisikan sebagai berikut:

nomor seri	fungsi	catatan
1	5V	Keluaran
2	5V	keluaran
3	tidak
4	RF1	Sakelar RF1
5	RF2	Sakelar RF2
6	ANTD	Sakelar Antena
7	tidak
8	tidak
9	MENGATUR ULANG	Reset firmware MESH
10	LNA2_LED
11	LNA1_LED
12	GND
13	12V	12masukan V
14	12V	12masukan V
15	GND
16	RSSI_H	Indikator Kekuatan Sinyal yang Diterima: Kuat
17	RSSI_M	Indikator Kekuatan Sinyal yang Diterima: Sedang
18	RSSI_L	Indikator Kekuatan Sinyal yang Diterima: Lemah
19	ANTC	Antena Menghidupkan/mematikan
20	PA1	Penguat Daya 1 Mengalihkan
21	ANT1	Antena 1 Mengalihkan
22	LAN1_TX_N	Pelabuhan Jaringan
23	LNA1_TX_P	Pelabuhan Jaringan
24	GND
25	LNA1_RX_N	Pelabuhan Jaringan
26	LNA1_RX_P	Pelabuhan Jaringan

7, Masukan Daya: 7-18V, kutub positif dan negatif dilarang untuk dibalik! Jika tidak, itu akan rusak

Silakan langsung mengelas kawat atau mengelas konektor XT30. Konektornya juga ditandai dengan kutub positif dan negatif, jangan membalikkannya!

8, Port Jaringan Pin Onboard:

Jarak pin 1,27mm, 4PIN (Port jaringan ini hanya dapat mengkonfigurasi data perangkat lokal dan pihak lain, dan tidak dapat mengakses data LAN6 dan LAN9)

9, 20PIN 0.5konektor kabel fleksibel FPC mm, definisinya adalah sebagai berikut: (disediakan nanti)

10, Pelabuhan LAN:

1.25konektor mm, Kalau sering dicolok dan dicabut, disarankan untuk menghubungkan soket RJ45 secara eksternal dengan trafo isolasi.

1. LAN-RX-P
2. LAN-RX-N
3. LAN-TX-P
4. LAN-TX-N

11, Pelabuhan LAN: 12antarmuka PIN, PCI-E, dan antarmuka USB

12, Antarmuka Penggemar: GND adalah tanah, 5V mengeluarkan 5V, VCC terhubung ke catu daya utama, dan konektornya adalah 78172 seri

13, Saklar pelompat:

1. Putar ke posisi ON untuk mematikan daya amplifier RF1.

2. Putar ke posisi ON dan matikan power amplifier RF2.

3, tidak digunakan.

4. Kembalikan pengaturan pabrik.

Setelah dihidupkan dan masuk ke sistem, tekan kode ke 1 untuk lebih dari 5 detik, lalu tekan kodenya ke 0 untuk mengembalikan pengaturan pabrik.

Parameter Configuration Tool for Windows Software Download

2.3G-2.4G frequency

1.4frekuensi G

P2P drone robot video data radio link operation guide

1: Does this drone video data link support IP mesh networking?

Although this model supports IP mesh, it has an extra cost. IP mesh networking maximum support is 10km between two points.

The default model does not include an IP mesh networking function. Please contact us for details before the order and shipment.

2. Does it work in Point to Point and one Point to Multi-Points?

Yes, this wireless video data link module supports point and one-point to multi-points. Considering the bandwidth and transmission speed, our engineer suggests connecting up to four points at the same time.

3. How to test the latency of the two-way wireless video data link module?

Thanks.

I will take a test video to show you the exact ways and real latency of the two-way wireless video data audio link module.

4. Can you make your wireless video two-way link on 2.4ghz band?

1.4G has stock.
The engineer told me that he can modify the frequency from 1.4G to 2.3G （2310-2380Mhz）, can not 2.4G now.

Pertanyaan: Can you make it the working frequency at 2280-2380Mhz?

Maaf, no we don't have it at 2280-2380Mhz, only 2310-2380Mhz.

5. Does your wireless video data transmission support mesh Ad Hoc networking? Do you have a user guide?

One version of our wireless video data transceiver supports mesh Ad Hoc networking. Please tell us if you need this function. The default is point-to-point networking. (one transmitter to one receiver).

Please check the users guide for the mesh Ad Hoc network version at the below link.

https://ivcan.com/ip-mesh-ad-hoc-network-user-guide/

6. For Vcan1401-Mesh, do you have a JSON command set? I want to integrate it into our Linux code.

Yes, we can offer you. I confirm that this model allow to control the channels via serial commands.

Silakan unduh pada tautan di bawah ini.

Vcan1401-Mesh system HTTP Json Management Interface Description 1.3

Vcan1401-Mesh serial port control function description

Vcan1401-Mesh系统HTTP JSON管理接口说明

Vcan1401-Mesh串口控制功能说明

7. Do you have an operating guide for the Vcan1401-Mesh module?

Yes, we can offer you.

Silakan unduh pada tautan di bawah ini.

Vcan1401-Mesh Ad hoc network communication station operation guide

Vcan1401-Mesh自组网通信电台操作指南

https://ivcan.com/ip-mesh-ad-hoc-network-user-guide/

Vcan1401 mesh version serial port AT setting routine description

8. I need a drone application data link modem having following: Bi-Directional Ethernet, Bi-Directional Rs-232, Kecepatan data minimal 4Mbps, Kisaran minimal 30 km, size 70mm * 50 mm * 20 mm

1. Support RJ45 IP Ethernet (IP camera or computer)
2. Support Rs-232 data port. (shell printed COM, 5, Port Seri Data, 1.25konektor mm, 232 tingkat.
3. Support 10Mbps
4. 2x1W PA support 10~30km
   2x2w PA support 30~50km
5. 2x1W 7.2X4.8X1cm (72x48x10mm) kurang dari 60 gram
6. Only 1.4G now, not support 2.1G or 4.8G as working frequency.

9. If I buy 3 pieces of this device, can I put one of them in the middle of the transmitter and receiver to function as a repeater?

1. OK.Support as relay to extend long-range.
2. The device between the transmitter and receiver needs to be configured as the master, and the other two as slaves.

10. May I have some questions on the customize and development of your model?

Pertanyaan: Can it work like 2 modems in air and one on ground. modems in air send their video to the one on ground. do you have any demo video i would like to see.

Menjawab: Support two transmitters in the air and one receiver on the ground.

Pertanyaan: Would you change the frequency band may be in L, S or C. we will tell you the particular frequency band like 1.1 Ghz to 1.2 Ghz or 2.1Ghz to 2.2 Ghz or 4.8 Ghz to 4.9 ghz.

Menjawab: We can customize the frequency according to your demand. But the cost will be higher and time needs longer.

Pertanyaan: Also we would like to increase the range, may be from 30 km ke 100 km.

Menjawab: Increase PA then increase the transmission distance. We have some models support 100~150km wireless transmission distance.

Pertanyaan: Also in some modems we would like to have mesh networking waveform having relay, ptp and mesh capability.

Menjawab: Oke, we have some models that support the above function.

Please put 3rd unit between the transmitter and receiver as a relay to extend the wireless transmission range.

Pertanyaan: We would also like to customize waveform, modem size, frequency band and other functionalities.

Menjawab: Oke, please test our sample first. And tell us the exact what you really need.

Pertanyaan: Can we decrease the data rate to increase range?

Yes, from the air unit to ground unit, 2.4G transmission distance is 15km and it is 1.5km from ground unit to the ground unit. (the transmitter and receiver are both on the ground to use).

11. Would you tell me where can I set the AES encryption password?

Silakan periksa gambar di bawah ini.

12. How can I set up the serial port data to be broadcasted via UDP IP?

Our mini video data transceiver radio module can realize serial port data to network port.

Please directly fill in the server address in the serial port settings of the serial port end radio with the IP address of the corresponding receiving device (such as the receiving end or computer) in the figure below.

13. Does the data serial port of this mini wireless video data radio module support TTL?

The Vcan1401 point-to-point model only outputs data via RS232. The product is too small to fit an RS232 to TTL converter.

If you must connect a TTL interface, you need to add an RS232 to TTL converter outside the machine.