User manual for wireless video transmitter HD

Disclaimer

• Please read the user’s manual carefully before use. Be sure to pay attention to the warnings and understand all points completely.
• Please strictly abide by the local radio frequency management regulations.
• Please follow the installation steps in the manual to use this product. Our company and agent will not take legal responsibility for the damage of equipment or personnel caused by the installation and modification of users.
• This copyright of this manual belongs to Great Mainlink Tech Co., LTD. No one may make copies without written consent.

Atansyon                

Attention to installation

1. Before power on, make sure the antenna connection is reliably . Sinon, it will cause damage to the device.

2. Make sure that the voltage is within the range of use.

3. Please pay attention to the EMC of all the electronic equipments on your drone.

4. It is recommended that the antenna should be installed downward and keep the antenna away from the metal on the drone.

5. Make sure to use the matching antenna.

Before use                                      

1. Make sure that all cables are connected correctly and firmly.

2. No foreign objects (e.g. liquids, sand, elatriye) can be entered inside the device.

3. It takes 15 seconds for the device to start. Video and data cannot be transferred until the device has finished booting.

4. Please ensure that the environment in which the equipment is used is free of other electromagnetic interference.

5. When the signal weakens, you can improve the effect by changing the heading direction of the antenna.

D 'lis

Device X 2

apèsi sou lekòl la

Industry drone market is developing very fast in recent years. The fight time and distance of drones are getting longer and longer. MK22/MK55, a long-range wireless transmission system, is designed for VTOL fixed wing and other long-range drones. The system can transmit video, fight control data, done kontwòl kardan, and RC data simultaneously. With the advantage of high level intergration and powerful function, MK22/MK55 is a typical good product to meet long-range transmission requirements.

There are two frequency bands——800MHz、1.4GHz and 2.4GHz. Users can choose according to their needs. Please choose the suitable frequency band according to local regulations.

MK22 can transmit data and video to 22km, MK55 can transmit data and video to 55km, making it very suitable for long range drone.

If you use our recommend ground station, you only need one cable with connector to connect the device and your ground station.

^*1Test under LOS and no interference conditions。

Karakteristik

Long distance Modulation

-MK22 Up to 22km @ LOS– OFDM

-MK55 Up to 55km @ LOS

Video interface Data interface

– Ethernet *1 – UART（TTL/RS232）/SBUS，

Hopping/Fixed Frequency Band frekans

-Fiks: user defined – 800MHz/1.4GHz/2.4GHz

-Hopping:  otomatik Working mode

BW – Air unit can be ：Point to point mode

-5/10/20 MHz Repeater mode

Tanperati travay Power range

– 40℃ ~ + 70 ℃ – DC 9~28V Battery 3S~6S

M52 Interface Description

Air inite

side view

Ethernet

nimewo	Character	Deskripsyon	Input/Output
1	T+	TX +	nan
2	T-	TX-	nan
3	R+	RX +	mwen
4	R-	RX-	mwen

2. UART1

nimewo	Character	Deskripsyon	Input/Output
1	G	GND	klas distans opsyonèl
2	R	RS232 RX	mwen
3	T	RS232 TX	nan

3. UART2

nimewo	Character	Deskripsyon	Input/Output
1	G	GND	nan
2	R	TTL RX	mwen
3	T	TTL TX	nan

4. Pouvwa

nimewo	Character	Deskripsyon	Input/Output
1	G	GND	klas distans opsyonèl
2	V	+Vcc（9v~28v）	mwen

5. SBUS1

nimewo	Character	Deskripsyon	Input/Output
1	S	SBUS OUT	nan
2	V	+5v（I max 1A）	nan
3	G	GND	klas distans opsyonèl

6. SBUS2

nimewo	Character	Deskripsyon	Input/Output
1	S	SBUS OUT	nan
2	V	+5v（I max 1A）	nan
3	G	GND	klas distans opsyonèl

7. endikatè pouvwa

This indicator is solid green when air unit is booting.

8. endikatè Link

LED Pattern Description

solid green Wireless link is established

light off Wireless link is lost

9. Status Indicator

LED Pattern（Blink only in booting） Description

Blink 2 times Initialization OK, Frequency is 1.4GBlink 1 time Initialization OK, Frequency is 800M

Blink 3 times Switch mode (Swith from air to ground, vice verse)

Blink slow all the time Enter configuration mode

Blink fast all the time Device abnormal

10. SMA antenna connector.

1. Fiber glass antenna.
2. OLED display.
3. Battery
4. Connector.

nimewo	Deskripsyon	Input/Output
1	Rx+	mwen
2	Rx-	mwen
3	Tx+	nan
4	Tx-	nan
5	UART1 TX (RS232)	nan
6	UART1 RX (RS232)	mwen
7	UART2 TX (RS232)	nan
8	UART2 RX (RS232)	mwen
9	NC
10	RC1_IN	mwen
11	RC2_IN	mwen
12	+5v	nan
13	GND	klas distans opsyonèl
14	GND	klas distans opsyonèl
15	GND	klas distans opsyonèl
16	GND	klas distans opsyonèl
17	GND	klas distans opsyonèl
18	GND	klas distans opsyonèl
19	VCC (9v~28v)	mwen
20	VCC (9v~28v)	mwen

Specification

kategori	Item	Detay
WirelessPèfòmans	Bann frekans	800Megaèrts / 1.4GHz
	seri frekans	800megaèrts：806MHz～825MHz1.4GHz：1427MHz～1447MHz2.4GHz:  2400~2480MHz
	Band width	5MHz/10MHz/20MHz
	modulation	OFDM
	EIRP	MK22: 30dBm±1dBMK55: 33dbm ± 1dB
	sansiblite	≤-95dBm
	Range	MK22: 22kmMK55:55km*1
	To bit	30Mbps @ 20MHz
Ranje pouvwa	DC 9 ~ 28V
konsomasyon pouvwa	≤8.5W
Entèfas	antèn	Lekòl Segondè *2
	Pouvwa	XT30
	UART	TTL 3.3V，1 kòmanse ti jan, 8 ti jan done, 1 sispann ti jan, pa gen parite., Baud pousantaj 115200 （default），57600, 38400, 19200, 9600
		UART1 ak UART2
	SBUS	SBUS_IN
		SBUS_OUT
	Ethernet	4 PIN
	Bouton	1
	Chanje	Pou switch lè ak tè
antèn	Entèfas	Lekòl Segondè
	Kalite	Air：Glue stick antenna 20cmGround：Fiber glass antenna, penal antenna
	polarization kalite	vètikal
	Akeri	Air：2.5dBiGround：12dbi
	SWR	≤2.0
Anviwònman	Tanperati travay	-40℃ ~ + 70 ℃
	tanperati depo	-40℃ ~ + 85 ℃
	Imidite	5~ 95%，ki pa kondanse
Aparans	Kantite moun ki	112 X 63.5 X 19 mm
	pwa	143g