Pi bon FPV Videyo Transmetè Modil 170-860Mhz Wireless RF odyo Videyo Transmetè pou FPV Kamera 3W PA 50km
Pi bon FPV Videyo Transmetè Modil 170-860Mhz Wireless RF odyo Videyo Transmetè pou FPV Kamera 3W PA 50km
Table of Contents
Sample With Casing (full set including antenna)
Please contact us if you want to change some parts in the full set. For Example, you want to different antenna lengths, a transmitter parameter configuration tool for changing the transmitter’s frequency bandwidth, attenuation (3-watt PA to change 2-watt or 1-watt), setting AES128 password, elatriye.
Video Transmitter TX Module
- We can adjust the RF bandwidth of this model to 2M/QPSK and increase the receiving sensitivity to -98 (actual), which is 7dB higher than the original sensitivity. This will more than double the corresponding transmission distance.
- What UAVs care about is the size and weight of the Video Transmitter TX Module. The weight of the whole machine can be within 100g.
- The Wireless Video Transmitter TX Module transmission itself has a delay of 75ms.Souvni
- One-way COFDM video transmission, mainly used for FPV(First Person View)
- SD video transmission, RF bandwidth up to 2M, end-to-end delay of less than 120ms.Souvni
- Default 3W PA support 50km (an)
- The default working frequency is 595 megaèrts, and we can customize 170~860 Mhz
- Fòma kodaj videyo: H265
- dimansyon: Motherboard size: 50 X 35 X 10mm; overall machine size: 67 X 48 X 23mm (3W and above lower output)
- Protection standards: All-aluminum radiator shell, anti-rust, konsepsyon chòk-prèv
- Sa a FPV video transmission supports digital encryption (AES128 bit). Unlike ordinary FPV analog video transmitters, it cannot be encrypted. Others can also see the same real-time video on the same frequency.
Video Receiver RX Module
RF Wireless Video Receiver Dimension 70×80×15mm
Here is the FPV video transmitter with a metal case.
Why this model is better than COFDM-912T as an FPV video transmitter?
The difference between COFDM-912T and FPV1887 wireless video transmission is
- The FPV1887 video transmission video delay latency is small, sèlman 120 milisgond. COFDM-912T delay is more than 400ms.
- With different modulation bandwidths, with the exact video resolution, the FPV1887 video transmission only requires 2megaèrts Pleasant, while COFDM-912T requires more than 6MHz.
- FPV1887 has a longer-range transmission distance, stronger diffraction performance, and anti-interference performance. Because it uses a narrower bandwidth, it has higher receiving sensitivity and takes up fewer resources.
- Smaller size and weight: Compared with COFDM-912T video transmission, the FPV-1887 video transmission adopts a more advanced encoding and modulation scheme, with lower overall power consumption, smaller size, and a weight of only 80g.
- The unique 45-degree RF antenna design is more suitable for the FPV and is more suitable for the high-speed flight angle of the FPV.
- The video transmission of this FVP1887 is suitable for vehicles with a flying speed of about 120km. For vehicles with higher flying speeds, the video delay will appear larger and the control will not be so good.
- More amplifiers to choose from 1 Watts, 2 Watts, 3 Watts, ak 4 Watts. (default 3-watts support 50km)
FAQ
kesyon: Why does powering on the transmitter cause its shell to become very hot?
repons: Premye, we tested this circuit board at temperatures of minus 40 degrees and 85 degre. The hand feels very hot and will not affect the normal use of the transmitter.
Second: There are two reasons why the case temperature is a bit high:
- To be waterproof, our casing does not have heat dissipation holes and fan holes.
- To support 50 kilomèt, we have a built-in three-watt amplifier. A power amplifier requires a cooling fan. The chip and board of the power amplifier are close to the metal casing to transfer heat.
kesyon: The shell of this transmitter looks very heavy, and not suitable for installation on a drone that needs to be lightweight, dwat?
- For this product, we mainly provide transmitter boards and receiver boards or modules. Users can customize the case or install it on their own device or aircraft.
- This optional case is convenient for customers who need it to take samples for testing. There is a case to protect the circuit board from damage during transportation and testing.
- We also use lightweight and cheap aluminum, which is processed by a CNC milling machine. The shell’s protrusion is not just for looks; it improves the transmitter’s performance by dissipating heat more effectively.
- Please mount the transmitter on the metal of the aircraft. With the addition of heat dissipation glue, it can effectively dissipate heat with the help of the metal shell.
- You can also use the four-roto of the UAV to cool its shell, which is equivalent to an external fan.
- If the transmitter board temperature exceeds 100 degre, it will automatically protect itself and the video will be frozen.
kesyon: What is the Camera resolution? Sipòte HDMI?
kesyon: What is the power of the transmitter without an additional amplifier? 100-200MW?
kesyon: Why is your FPV video transmitter price higher than the UHF analog video transmitter?
repons:
- This FPV video transmitter is not an ordinary FM-modulated analog video transmission.
- Ours is COFDM digital video transmission, not the FM-modulated analog video transmission you understand. Video Quality is SD720P, clearer, ki estab. It is more resistant to interference and supports video encryption.
- The FM-modulated video transmission frequencies are 1.2G, 1.3G, 2.4G, ak 5.8 G. The biggest advantage of video transmission is that it is cheap. The transmission distance is limited to short distances with an eye-see line of sight.
- Our FPV video transmitter can transmit HD video at ultra-low altitudes and non-line-of-sight conditions. A specialized receiver is required to decode it.
kesyon: Can we assemble the repeater by ourselves using two sets of receivers and transmitters?
repons: Asire w, you can do like that.
If you need a relay and also control the plane, we recommend that you choose TX900, which just uses three units that can be formed a complete networking, transmetè, repete, ak reseptè.
If you just need a one-way transmission system to download the video from the UAV to the repeater or ground. We recommend using our FPV repeater devices. Tanpri tcheke foto ki anba a. We have put the receiver and transmitter in one box.
There are two frequencies, pa egzanp, 800Mhz from the transmitter to the repeater, and 300Mhz from the repeater to the receiver
To avoid interference, you also add two filters, and PA in the repeater module to increase the signal strength.
The above picture is from our engineer, he has a real sample now. The two filters and repeater are not in one box, if you confirm the order, we will do another casing or do casing by yourself according to your uav.
Relay or named repeater, which is a Kit for video re-transmission to extend the range.
The repeater with two filters is almost 450 gram, not including the antenna.
If the relay has two filters, is it still necessary to add a filter for the transmitter and receiver?
It is better to add a narrowband bandpass filter so that the reception performance will be very good.
kesyon: What is the idea of using two of the same antennas on the receiver?
repons: There are two diversity antennae on the receiver. One is ok, two is better, to get more signal from the transmitter, and increase the reception performance.
kesyon: What is the bandwidth of the channel?
repons: The default is 6Mb. You also can change it from 2MB, 4MB, 6MB, or 8MB if you want and buy the extra parameter tool board for the transmitter. It is better that you test at our default setting.
kesyon: Can I combine a directional antenna with a circular?
kesyon: Is it possible to set the input and output video type manually (PAL / NTSC)?
repons: PAL / NTSC both support, auto-detect, and switch according to your input camera.
kesyon: We need a configured board for the transmitter. How much it costs?
repons: To reduce the transmitter’s gross weight, the configure tool of the transmitter is external. If you don’t have it, the system is also working well at our default setting. If you have it, you can change the parameters of the transmitter, such as frequency, Pleasant, AES password, elatriye.
kesyon: Does the receiver have analog and HDMI output?
repons: Wi, the receiver has both analog (cvbs, composite video output) and HDMI video output.
In order to lower the video latency, the default setting, HDMI is only a video signal, no audio signal.
kesyon: Extra wave filters for drones – we need this (how much does it cost?)
repons: The FPV transmitter inside already has a low pass filter inside for the drone. Please tell us what requirements do you need.
Frequency Filters have two types, one is a low-pass filter, such as the working frequency is 595Mhz, then over 610Mhz can not be passed. Another filter type is bandwidth pass filter, such 580~610Mhz can be passed, others can not be passed.
kesyon: We need a direct RF antenna input in the FPV video transmitter metal case. Can you make it?
Now We designed the 45-degree tilt angle to be convenient for the transmitter antenna facing the receiver to increase the reception performance.
kesyon: Is the power of the transmitter and receiver 12 vòlt? What amperes?
kesyon: What are the default settings for this FPV camera transmitter and receiver? (How to reset to factory settings)
kesyon: Why do transmitters and receivers need to support encryption and decryption functions?
Ki sa ou ta dwe di nou lè ou kòmande?
frekans
The default frequency is 595 megaèrts. We have stock TX and RX antenna for 595Mhz. For other frequencies, we need almost ten days to customize the antenna and PA power amplifier.
antèn
What type of antenna do you need? Whip transmitting antenna? 60cm length fiberglass antenna with U-type bracket? or with a magnetic base of the in-car antenna?
Extra Parameter Configuration Tool for the TX
Extra Parameter Configuration Tool Board for Transmitter is USD45 for professional buyers. (Receiver has screen and menu to adjust parameter).
Customized FPV Video Transmitter
Default Frequency 595Mhz, No-need receiver antenna
FAQ
repons:
The default frequency is 595Mhz, (the center working frequency of the power amplifier and antenna is 595Mhz, ) I checked that this is not the range of your table mentioned. Nan lavni, the anti-drone jammer may cover 595Mhz, we also can preset different frequencies chosen from 170-860Mhz.
MinimOSD is the function to transmit telemetry of the flight controller with overlay on the video channel.
FPV VTX transmitter and receiver, understand SNR and PW value
FPV1887 supports multi-camera transmitters and one receiver
FPV VTX RX PCBA high-low temperature tested in -40~80°C degree
More about FPV
модуль шпд для fpv, усилитель видео fpv, Analogue video transmitter, все о видео передатчиках, видеопередатчик fpv, cofdm трансивер, رسیور کی فریکویسی تبدیل کر سکتے ھیں, tx rx module, cofdm modulation, модули видеопередачи для fpv, Radio commande 15km, китайские системы предотвращения чп на производстве, COFDM цифровой FPV, Building an AV wireless camera transmitter circuit, Radiocomande bidirectionnel avec flux vidéo porté (50 km), 2,4 GHz Video Sender 2 Watt , связь беспроводной датавидео,
беспроводной передатчик видеосигнала, ретранслятор на 2.4 и 5.8, передача данных 1.4 мгц, передатчик для дрона, передатчики видеосигналов аналоговые для дрона, tansmeteur vidéo longue portée UAV, промышленный беспроводной приемо передатчик, ofdm fpv camera, hdmi encoder, rtsp декодер, fhss это, передатчик для аналоговой камеры fpv, антенна для индикатора дронов в виде рации плоская,
wifi передатчик для камеры, long range uav data link, lontan ranje transmetè videyo, long range wireless camera transmitter, trasmettitore video wireless,transmission video sans fil,data link transmitter, bidirectional airborne transmitter,long range camera transmitter,wifi передатчик дальнего действия,long range digital video transmitter,wifi передатчик видеосигнала,משדר וידאו אלחוטי,военный cofdm беспроводной передатчик сигналов,analog cctv wireless transmitter,беспроводной передатчик видеосигнала,FM transmetè 10 km ranje,transmission vidéo sans fil longue distance,видеопередатчик для дрона,fhss in wireless communication,
- Should I choose two frequencies for FPV repeater mode?
- FPV digital video transmitter VS FPV analog video transmitter
- FPV COFDM Digital Video Transmission V.S. FPV FM Video Transmission comparison
| pwa | 5 KG |
|---|
pwodwi ki gen rapò
Inidireksyon One-Way
Videyo emetris