COFDM IP wireless data transmitter module
COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port Vcan1816
- Common cofdm transmitters are video signal inputs such as HDMI, CVBS, SDI, or AHD. This one is a transparent transmission module that can support IP cameras and support video and data through cofdm.
- Paired with this COFDM network video data transmitter is a COFDM receiving module, which can realize HDMI and CVBS output, and can also output video to a computer, आरटीएसपी, or UDP player through an IP network port RJ45.
- The key role is to use UDP broadcast/multicast to send data.
- एकतरफा वायरलेस ट्रांसमिशन नेटवर्क पोर्ट ट्रांसमिशन लिंक बनाना संचारण मॉड्यूल नेटवर्क पोर्ट के माध्यम से डेटा प्राप्त करता है और डेटा प्राप्त करने के बाद COFDM के रूप में नेटवर्क पोर्ट द्वारा प्राप्त डेटा को प्रसारित करता है। + receive the module, एकतरफा वायरलेस ट्रांसमिशन नेटवर्क पोर्ट ट्रांसमिशन लिंक बनाना संचारण मॉड्यूल नेटवर्क पोर्ट के माध्यम से डेटा प्राप्त करता है और डेटा प्राप्त करने के बाद COFDM के रूप में नेटवर्क पोर्ट द्वारा प्राप्त डेटा को प्रसारित करता है।
- संचारण मॉड्यूल नेटवर्क पोर्ट के माध्यम से डेटा प्राप्त करता है और COFDM के रूप में नेटवर्क पोर्ट द्वारा प्राप्त डेटा को प्रसारित करता है
- संचारण मॉड्यूल नेटवर्क पोर्ट के माध्यम से डेटा प्राप्त करता है और COFDM के रूप में नेटवर्क पोर्ट द्वारा प्राप्त डेटा को प्रसारित करता है, संचारण मॉड्यूल नेटवर्क पोर्ट के माध्यम से डेटा प्राप्त करता है और COFDM के रूप में नेटवर्क पोर्ट द्वारा प्राप्त डेटा को प्रसारित करता है
यूनिडायरेक्शनल COFDM नेटवर्क पोर्ट वायरलेस ट्रांसमिशन मॉड्यूल फ़ंक्शन:
विषयसूची
विशेषताएं
- यूनिडायरेक्शनल COFDM नेटवर्क पोर्ट वायरलेस ट्रांसमिशन मॉड्यूल फ़ंक्शन, और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है.
- और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है: नेटवर्क पोर्ट, और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है. और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है: और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है
- CFG-UART: और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है, 4और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है, can be docked to our parameter configuration panel. और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है, वायरलेस बैंडविड्थ, और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है (और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है, और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है, नक्षत्र मोड, और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है, आदि।) और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है.
- और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है (टेक्सास): और फिर नेटवर्क पोर्ट डेटा प्रसारित किया जाता है.
- TF कार्ड इंटरफ़ेस, सॉफ्टवेयर अपग्रेड, और रखरखाव.
- पावर इनपुट इंटरफ़ेस (शक्ति): 2PIN 2.0mm pitch Phoenix terminal. वोल्टेज आपूर्ति: 7वी ~ 24V.
- और रखरखाव: और रखरखाव, and the data is flashed when the data is transmitted usually.
- और रखरखाव: The power input indicator, और रखरखाव.
- और रखरखाव: 73और रखरखाव (और रखरखाव), और रखरखाव.
- और रखरखाव:
- और रखरखाव: 1/2, 2/3, 3/4, 5/6, 7/8
- और रखरखाव: QPSK / QAM16 / QAM64
- IFFT मोड: 2कश्मीर
- और रखरखाव: 1/4, 1/8, 1/16, 1/32
- वायरलेस बैंडविड्थ: 1 और रखरखाव, 1केएचजेड चरण
- विन्यास योग्य आरएफ आउटपुट पावर: -94विन्यास योग्य आरएफ आउटपुट पावर (विन्यास योग्य आरएफ आउटपुट पावर, विन्यास योग्य आरएफ आउटपुट पावर).
- विन्यास योग्य आरएफ आउटपुट पावर: between 200MHz ~ and 2300MHz can be configured arbitrarily
विन्यास योग्य आरएफ आउटपुट पावर
वायरलेस ट्रांसमिशन दर (एयर इंटरफेस दर):
मूल्यांकन करें(विन्यास योग्य आरएफ आउटपुट पावर) विन्यास योग्य आरएफ आउटपुट पावर (बैंडविड्थ(मेगाहर्ट्ज) * 8.0/7.0) / (1+सैनिक) * 1512/2048*विन्यास योग्य आरएफ आउटपुट पावर(विन्यास योग्य आरएफ आउटपुट पावर) * विन्यास योग्य आरएफ आउटपुट पावर * 188/204.
विन्यास योग्य आरएफ आउटपुट पावर, विन्यास योग्य आरएफ आउटपुट पावर, विन्यास योग्य आरएफ आउटपुट पावर, विन्यास योग्य आरएफ आउटपुट पावर:
UART AT Command
ATDR、ATSD、ATSG、ATSM、ATGD、ATSR、ATGR、ATGB is useful
For the UART AT command operation and format, कृपया नीचे दिए गए लिंक की जाँच करें.
Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command
Receiver Module
Suggestions
- This is a one-way unidirectional transmission system. if you need a two-way bidirectional transmission system, कृपया इस लिंक को जांचें. https://ivcan.com/t/two-ways/ or https://ivcan.com/ru/p/mini-cofdm-wireless-ethernet-transmission-module-rj45/
- This is only a data transmission system, if you need video+data transmission, please look details of these modules, hTTPS://ivcan.com/p/modulator-demodulator-module-encoder-decoder-hdmi-cvbs/
- If you need a relay (अपराधी) to support a longer transmission range (distances), please choose stronger PA (ताकत बढ़ाने वाला) के भीतर, उदाहरण के लिए, change 1Watts PA to 2.5 वत्स या 5 वाट.
–160MHz~860MHz HD video COFDM receiver module with HDMI/AV/Ethernet/USB output
The COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, suitable for use in fluid and high-mobility applications. The receiver module accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. The receiver module can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver module features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios supported.
The receiver module also includes DVR record functionality with a Micro SD card or USB disk. इसके अतिरिक्त, the receiver module has a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like smartphones or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.
When paired with the Our COFDM transmitter module, the receiver module offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.
- COFDM demodulation and H.264 video decoder;
- पूर्ण एचडी संकल्प, 1080P@60fps;
- Great security by AES decryption;
- DVR record with Micro SD card or USB disk;
- Built-in RTSP server enables video streaming over Ethernet;
- Enables video streaming over a USB host for the remote device;
- Supports display characters string on the video display screen in OSD mode;
- Stable signal transfer in NLOS and high-speed moving;
- समायोज्य कार्य आवृत्ति, and bandwidth.
विशिष्टता:
आईओ
HD video output | HDMI type A connector |
समग्र वीडियो आउटपुट | 6पिन PH2.0mm कनेक्टर |
ध्वनि - उत्पादन | Embedded HDMI and CVBS |
आरएफ इनपुट | Two SMA female 50Ω |
मिनी एचडीएमआई इनपुट या एसडीआई | 2PIN PH2.54mm connector |
यूएसबी होस्ट | 4पिन PH2.0mm कनेक्टर |
TTL UART data | 3पिन PH1.25mm कनेक्टर, 3.3V signal |
मिनी एचडीएमआई इनपुट या एसडीआई | 4पिन PH1.25mm कनेक्टर, 3.3V signal |
ईथरनेट | 6पिन PH2.0mm कनेक्टर |
टीफ़ कार्ड | टीएफ-कार्ड स्लॉट |
चांबियाँ&एल ई डी | 2*5पिन PH2.0mm कनेक्टर |
demodulation
डिमॉड्यूलेशन प्रारूप | COFDM(टी) |
वाहक | 2कश्मीर |
बैंडविड्थ | मिनी एचडीएमआई इनपुट या एसडीआई, 1 किलोहर्ट्ज़ से कदम |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
रक्षक मध्यांतर | 1/32, 1/16, 1/8, 1/4 |
नक्षत्र | QPSK, 16QAM, 64QAM |
बिटरेट | 0.51 किलोहर्ट्ज़ से कदम |
आरएफ
आवृत्ति बैंड | 160मेगाहर्ट्ज ~ 860MHz |
ट्यूनिंग चरण आकार | 1KHz |
संवेदनशीलता | -97±1dBm(बीडब्ल्यू=8मेगाहर्ट्ज, QPSK, सीआर=2/3, जीआई=1/16) एक चैनल के लिए और दो चैनल के लिए 3dBm जोड़ें |
वीडियो और ऑडियो
वीडियो आउटपुट | एचडीएमआई और सीवीबीएस, ईथरनेट(RTSP protocol by default, option UDP), यु एस बी |
वीडियो प्रारूपों | 1080पी या 720पी
720*480 60मैं(NTSC), 720*576 50मैं(पाल) |
वीडियो डिकोडिंग | MPEG-4/H.264 AVC |
ध्वनि - उत्पादन | एंबेडेड एचडीएमआई और एवी ऑडियो |
ऑडियो डिकोडिंग | एएसी |
डिक्रिप्शन | ऑडियो कोडिंग |
भंडारण | USB disk or micro SD card |
निगरानी और नियंत्रण
Comprehensive receiver setup with Our Config Panel or Windows PC or other devices via control UART.
तापमान सीमा
ऑडियो कोडिंग: 0° से +70°C परिवेश
भंडारण: ऑडियो कोडिंग
भौतिक विशेषताएं
Board Dimensions: 80.4*50.8मिमी
ऊर्जा की आवश्यकताएं
ऑडियो कोडिंग: 9~24वीडीसी
बिजली की खपत: <300एमए@12वी
IO Signals
चांबियाँ + एल ई डी:
The receiver module has a 2*5PIN PH2.0mm connector which provides “keys + LEDs” signals. It is designed for customers who want to expand LEDs and keys to their cases.
PWR led signal: this two-pin can connect to an led for the power indicator, and constant light when the device is normally powered.
The link led signal: this two-pin can connect to an led for a wireless link indicator, which blinks when the video stream is received.
REC led signal: this two-pin can connect to an led for a record indicator, and constant light when video recording.
REC key signal: this two-pin can connect to a button for the switch of video recording, and a short press to change its status. The receiver will automatically check the storage device(micro SD card or USB disk) after powering on and start to record video when the storage device is inserted. Just press it to stop or record again.
OSD key: this two-pin can connect to a button for turning on/off the status of the OSD displaying, long press it to switch(more than 1s). The status will be kept after a reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:
आरएफ:338.0MHz BW:4.0मेगाहर्ट्ज ; आरएफ, काम कर आवृत्ति; BW, बैंडविड्थ
QPSK सीआर:2/3 सैनिक:1/16 ; नक्षत्र, FEC, रक्षक मध्यांतर
वायु:3.90एमबीपीएस ; वायु, wireless transmitting bitrates
VBR:3.05Mbps AES OFF ; VBR, video bitrates; एईएस रवाना, AES encryption turned off.
SIG1:27 SIG2:22 ; SIG1, the signal intensity of antenna 1; SIG2, the signal intensity of antenna 2
ber1:0.14% ber2:100.00% ; ber1, bit error rate of antenna 1; ber2, bit error rate of antenna 2
कोई संग्रहण बंद आरईसी ; video recording status
Paired with COFDM transmitter:
The default normal features of the two-antenna Wireless receiver module can be paired with all of Our H.264 transmitter modules. The HD video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 200~250ms.
Our two-antenna COFDM Wireless Receiver module can also be paired with our COFDM transmitter module for the lowest video latency application when manufactured with specified firmware. The specified firmware enables proprietary H.264 video compression/decompression only using p-frames for the lowest latency. ट्रांसमीटर के इनपुट से रिसीवर के HDMI स्क्रीन डिस्प्ले तक वीडियो विलंबता लगभग 50ms से 130ms है.
How to test COFDM IP wireless video data transmitter module?
ethernet modem in one way
पूछे जाने वाले प्रश्न
Please note that this network transparent transmission device is one-way transmission, it can only realize UDP broadcast function, although there is an RJ45 network port, but because it is not two-way transmission, it cannot realize the ping command, so even if you want to connect an IP camera, you need special customization IP cameras, because ordinary IP cameras need two-way transmission equipment.
How to test this network transparent transmission device, कृपया नीचे दिए गए लिंक की जाँच करें
How to test COFDM IP wireless video data transmitter module
नहीं, just net transfer via IP ethernet RJ45 input.
- If you want to test the video transfer, maybe you need an encoder board Vcan1746, transfer HDMI / CVBS video to IP stream, then connect the 1816 ट्रांसमीटर.
- प्रश्न: I already have Vcan1776, which has a Vcan1746 encoder board at the transmitter module, should I get one more encoder board?
- उत्तर: Although the encoder board of Vcan1776 can be reused. It needs to disassemble the Vcan1776 RF module, then connect the network port adapter cable, and change the different firmware. It is not recommended to do this. It is recommended that you purchase another separate encoder board.
- The voltage range of TX RX is 7~24V.
- At 12V power supply, use an adapter with a maximum of 1A or more.
- Prepare a formattedFAT32format Micro SD card
- Unzip the upgrade file from our verify and send to you, Here is "1816_update_image_xx_yy.zip" फ़ाइल, and copy it to the root directory of the Micro SD card, pay attention to keep the directory structure unchanged (there is a flash folder in the root directory of the Micro SD card, and there is an app folder in it).
- Insert the Micro SD card into the Vcan1816 module, power on and wait for the red light on the board to flash, indicating that the upgrade is successful.
- ध्यान दें:
Under normal circumstances, the update will be completed within 30s after power-on (the red light flashes). If the red light does not flash for a long time after power-on, please check the connection of Micro SD and try power-on again.