לְסַנֵן

Composite CVBS video to IP ethernet converter encoder board mini Video Encoder Board CVBS input and IP Ethernet output

ממיר CVBS ל-IP, לוח מקודד כניסת AV הקטן ביותר לפלט ethernet, אודיו וידאו מורכב, או שינוי מצלמה ל-IP

מק"ט: Vcan1987 קטגוריה: מודול TX RX תגיות: ממיר CVBS ל-IP, ultra low latency encoder board

תאור
שלח שאילתה

ממיר CVBS ל-IP, לוח מקודד כניסת AV הקטן ביותר לפלט ethernet, אודיו וידאו מורכב, או שינוי מצלמה ל-IP

תוכן העניינים

פוּנקצִיָה

CVBS to IP converter AV encoding board function:

Analog audio and video input, H264 הַצפָּנָה, output through the network port IP ethernet.

Composite CVBS video to IP ethernet converter encoder board
mini Video Encoder Board CVBS input and IP Ethernet output
Support UDP RTSP player VLC
Analogue camera to internet ONVIF TCP IP

חקירה חינם, הצעת מחיר חינם, תמיכה חינם, הצגת הדגמה חינם .

מִמְשָׁק

ממיר CVBS ל-IP Refer to the figure above for the encoding module interface and interface signals. The interface description is as follows:

אודיו אנלוגיים וממשק קלט וידאו: support analog video input, and audio input(קו Way)。
Input signal interface(1.25מ"מ spacer) ו 13 PIN Toshiba FPC Cable socket multiplexing;
יציאת רשת: 4PIN 1.25mm spacing base, the base signal, וה13 PIN Toshiba FPC Cable Socket multiplexing;
Software protocol: UDP way output.

13Pin Toshiba FPC Pin Define

CVBS to IP converter Smallest AV input Encoder board to ethernet output, composite video audio camera to IP transform — ממיר CVBS ל-IP הקטן ביותר כניסת AV לוח מקודד לפלט ethernet, composite video audio camera to IP transform

13PIN FPC socket layout enlarged pad diagram

בשימוש בפועל, you can put off the expansion interface card on the right side of the mini AV board to meet the needs of the structure.

ממשק USB: Write board firmware, the 4Pin 1.25mm spacing seat can be removed when the structure is installed.

Matching serial port:

4Pin 1.25mm spacing seat, which can connect to our parameter configuration panel board to configure the H264 encoding code rate and other parameters. For details, please refer to the operation description of our parameter configuration panel.

After you change the parameters well, you do not need to change and adapt to the needs of the structure, you can remove the 4-pin seat.

קלט כוח: 2-pin welding hole, support input voltage range 6 ~ 15V.

CVBS to IP converter board size: 42x37x1.2mm.

The thickness of the board PCB is 1.2mm, the thickness of the maximum device on the back is less than 2mm, and the thickness of the highest front device on the front is less than 5.5mm.

Heating:

The maximum power consumption of the ממיר CVBS ל-IP encoding module is 150mA@12V.

The normal operating temperature range is 0 ℃ ~ 55 ℃ (degrees Celsius).

If it is placed in a small structure for operation for a long time, the CPU needs to be cooled.

CVBS to IP converter Smallest AV input Encoder board to ethernet output, composite video audio, or camera to IP transform — ממיר CVBS ל-IP הקטן ביותר כניסת AV לוח מקודד לפלט ethernet, אודיו וידאו מורכב, או שינוי מצלמה ל-IP

שאלות נפוצות

1. Does it support my low-resolution thermal camera 256x192 on CVBS video?

CVBS currently only supports the common יָדִיד (720x576) ו NTSC (720x480) resolutions.
Because the interface chip automatically adapts, We guess that our encoder board can not recognize your interface chip with this resolution.
It is recommended that you connect the thermal imaging camera to an AV monitor or HDMI monitor to see if it can be displayed. If so, although the actual resolution is low, the video stream format may not be this 256x192.
If it's HDMI, it's possible to modify the software to adapt to your camera; if it's CVBS, I think it's difficult unless you send the camera over and we can debug the software.
If you need a suitable IR thermal imaging camera, please check our product.