CVBS HDMI encoder for live streaming

What is a CVBS HDMI encoder for live streaming?

CVBS HDMI encoder for live streaming is a device that supports CVBS analog TV composite video input and HDMI 1080P high-definition video input; The board output is IP RJ45 and supports RTSP player and UDP player, which means it connects the board to the internet. Your video sources will become the stream and play on the internet.

TTW

Q1: E rawa beka ni nomu CVBS HDMI encoder for live streaming support MPEG-2 TS over UDP supported?

A1: Io. Our CVBS HDMI encoder for live streaming supports MPEG-2 TS over UDP.
https://ivcan.com/p/hdmi-to-ip-encoder-modulator-cvbs-h-265-h-264-encoding-board-pcba-ethernet-lan-http-rtsp-udp-onvif-tcp-ip/

Q2: Instead of RSTP, I need an MPEG-2 Transport stream

A2: Do you need DVB-t RF out, which supports the Transport Stream?

Q3: Sega, just CVBS input and Ethernet out, Ethernet protocol: H.264. For compression, MPEG-2 TS on UDP broadcast, I need a quote for 5 qty and a complete datasheet.

A3: Vcan1746 can output the TS stream over UDP, but the output TS stream is a non-standard Transport Stream that we have modified, which needs to be interpreted by our decoder board or player.

T5: What should I do if I can’t ping the encoder board from my computer?

Directly connect the UART cable of the encoding board to the computer, and use the serial port debugging assistant to send the ATGIP_ ivunau. Get IP address command Operation Video at Youtube

1. I can get the sub-stream quickly, but the mainstream needs to get it after reboot. What should I do?

I have tested your encoder multiple times with our system. It is working fine overall.
But we have one big issue to validate its usage :
Whenever we turn on the system camera and the encoder at the same time, we cannot read the “mainstream”, we can only read the “sub-stream”.
We have to “Reboot” the encoder via the web interface to make it work: after the reboot, we can directly read the mainstream.
We tried with both VLC and Gstreamer.
What could we try to have both streams readable on startup?

iVcan reply: In the opinion of our engineers, it is either a problem with camera recognition or a problem with customer use.

I suspect that the board card did not recognize the customer’s HDMI camera.
This is easy to verify (if you cannot access the sub-stream, it will be difficult to verify).
Log in to the web server of the encoder board and you can see the camera recognition status on the video page.

HDMI encoder can detect the video input source
The video page will only display the recognition status of one camera. If HDMI and AV cameras are connected and recognized at the same time, the video page will display the recognition status of the HDMI camera (such as 1080p60):
As long as the HDMI camera can recognize it normally, Mainstream can be accessed normally.
If the HDMI camera is not recognized normally, please check the HDMI wiring and power on the board again (note that this is a power cycle, not a software restart on the web page)

Me kena ikuri, the board uses a random Mac address, so the Mac address will change every time we restart it.
For devices with an ARP cache (such as a PC), after restarting, it will be temporary (a few seconds) unable to access the board from the network. , We cannot access it until the arp request is re-initiated after timeout (the performance is that the coding board cannot be pinged for several seconds after restarting)
O koya gona, I guess another possibility is that when the customer accesses the mainstream, it cannot be accessed due to the above reasons. Then when the customer accesses sub-stream, the arp cache refreshes and the customer can access it, but the customer does not revisit the main-stream.

Whenever we turn on the system camera and the encoder at the same time, we cannot read the “Mainstream”, we can only read the “subStream”.

Judging from your description here, it seems that your camera is started after our encoding board. Please start your camera first, and then power on and start our encoding board to try it. Maybe it is not powered on at the same time. The powered-on order also matters. Me kena ivakaraitaki, your camera startup needs 10 na sekodi, but our encoder board startup needs only 5 na sekodi.

Because I am not sure whether your camera is very slow to initialize after power-on.
Because our encoder board starts very quickly, it may be that the camera has not been initialized after it started our encoder board, which may lead to some unexpected problems. This can also explain why “We have to “Reboot” the encoder via the web interface to make it work: after the reboot we can directly read the mainStream.”, because when your web page restarts the encoder board, the camera has already been initialized.

O koya gona, the final suggestions are as follows (I tried my best to list everything that came to mind and let you test them separately);

  1. Look at the video page of the web server and confirm whether the HDMI camera is recognized normally (you can send a screenshot to us). As long as the camera is recognized normally, Mainstream can be accessed;
  2. It is recommended that you ping the coding board under cmd first, and then access mainStream and subStream under vlc to avoid mistakenly thinking that Mainstream cannot be accessed due to random mac issues.
  3. Let you start your camera first (for a few seconds), then power on and start our encoding board to try (see the reasons described above)
  4. Follow your original operation of “turn on the system camera and the encoder at the same time”. When the problem “we are unable to read the “mainStream”, we can only read the “subStream”.” is reproduced, Do not restart the encoding board through the web page, but hot-swap the HDMI cable between your camera and the encoding board. I think it is only a hot-swap operation (because I suspect it is a plug-in detection problem that causes the camera not to connect to the encoding board. Send HDMI signal)
Itatarovi
Composite CVBS input IP RJ45 Ethernet output Ultra-low latency encoder board, HDMI CVBS Encoder

HDMI to IP encoder modulator CVBS H.265 H.264 encoding papa PCba Ethernet RSTP UDP me baleti UAV Drone Robotic

$399.00

SKU: Vcan1746 IWasewase: , Itoka: , , , ,

HDMI To IP encoder modulator CVBS H.265 H.264 encoding board PCBA Ethernet RTSP UDP for UAV Drone Robotic

Composite CVBS input IP RJ45 Ethernet output Ultra-low latency encoder board, HDMI CVBS Encoder
Composite CVBS vakacuruma IP RJ45 Ethernet output Ultra-low latency encoder board, HDMI CVBS Encoder

IVakamacala Taumada

There are many HDMI encoding boards on the market. Have you met these problems?

  1. The delay is too long
  2. The encoding format cannot be customized
  3. UART AT remote control or operation cannot be used.
  4. Can not support HDMI and CVBS dual video input encoding

Na matabose ni ivakatawa oqo e tokona na HDMI, SDI, iCurucuru ni vidio ni CVBS, kei na iTaba ni ithernet RJ45 bula ni gacagaca ni uciwai, most applications are for wireless video transmitters, ka na rawa ni vakacokotaka na sikinala ni vidio ni HDMI se CVBS ki na sala ni sarasara vakalivaliva ena H.264 se H.265, ka vakadewataka yani vei koya e ciqoma, CVBS ki na IP converter.

The HDMI and Composite CVBS video to IP ethernet stream encoder modulator module board parameter can be configured by UART software modification. Yalovinaka veitaratara mai ke o gadreva mo vakamatautaka e dua na itavi e tautauvata mo sotava kina na nomu cakacaka.

HDMI To IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet LAN HTTP RSTP UDP ONVIF TCP IP Vcan1746-back
HDMI To IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet LAN HTTP RSTP UDP ONVIF TCP IP Vcan1746-back

Vakayagataka:

Ultra-Low Latency

H265 or H264 support

HDMI and CVBS Dual Encoding

Two Audio inputs can switch

Mataveilawa NI YD se itukutuku ni waqa UART AT command configuration management

  • Ultra-low latency H.265/H.264 audio and video encoding maximum support 1080P60 real-time video capture and encoding
  • The HDMI or AV input is encoded and outputted to a wireless module through the Ethernet port. The video encoding bit rate can be adjusted dynamically.
  • Veitokoni ki na vakacuru irogorogo kei na kaukauwa ni vakarorogo e rawa ni vakadrogo. (Remote operate by UART AT command choose HDMI or CVBS audio)
  • You can choose between HDMI or AV encoding for two videos with the option to control the input source using an AT command.

CVBS HDMI SDI input to IP ethernet output encoder h264 h265 china factory
HDMI to IP encoder CVBS HDMI SDI input to IP ethernet output encoder h264 h265 china factory

Ivakatakilakila

Ena vakayagataka na papa ni volavola na veivakacokotaki ni vakarorogo kei na vidio H.265/H.264, tokoni me yacova na 1080P@60fps veivakacokotaki, and is backward compatible with other resolutions and frame rate encoding.

iCurucuru ni vakarorogo kei na vidio

  • Veimuataki ni HDMI(vakarorogo+vidio):1080 60T,1080 50T,1080 30T,1080 25T,1080 60Au,1080 50Au, 720 60T,720 50T,720 30T, …, veimataqali ivakarau me veiganiti (1080t, 1080Au, 720t, 1024×768, 1280×1024);
  • AV in the interface (vakarorogo + Vidio):720×480 60Au(NTSC),720×576 50Au(PAL), ivakarau toka. through the AV interface, it can be Line in Mic in.
  • Na vosa sega ni tiko ena vakarorogo e tautauvata kei na isema ni vakacuru vidio.
  • The audio input interface can also be configured through the Web UI when the serial port detects audio.
  • The audio and video source signals are encoded, kei na veitaratara ni rawati ni ivurevure ni vakarorogo kei na vidio ena rawa talega ni vakamatautaki ena gacagaca ni gacagaca ni vakaraitaki.
  • The audio and video source acquisition interface can be dynamically switched through serial port commands during system operation.
    Vidio leqa na vakadodonutaki: V.265 se H.264 ituvatuva, e rawa ni vakamataliataki na iwiliwili ni ivakacoko.
    Vakacokotaki ni vakarorogo: iVakadewa ni AAC.
  • Mai na parokaramu ni firmware digitaki ni HDMI+AV na katokatoni vata ga kei na vakacokotaki ni ilavelave ni vakarorogo ena papa(Vakarorogo ena taudaku)
  • Ena tiko ena vava ni volavola e dua na cakacaka ni kena rawa ni vakadrogotaki(Laini ki tuba), ka rawa ni semati ki na dua na rorogo e tautuba se livaliva ni vakarorogo. E sega ni kunei ka vakatagitaki na vakarorogo.

iKelekele ni Icanet (Veimuataki ni Icanet)
supports our two-way wireless transmission modulator module, se so tale na isema vakarua vei ira na ikatolu.

Veisoqaqa ni veisoqaqa ni vakau( FPC Main interface)
e rawa ni semati ki na noda ivakavakadewa ni vakau itukutuku ni veiyacaqe ni COFDM, ka rawa talega ni semati ki na noda ivakavakadinadina ni vakau isema vakayadua.

iTukutuku-UART
TTL 3.3 V ivakatagedegede, na yatu eso me vakataka na iwiliwili ni vakau baud (transmissiond rate) e rawa ni vakamataliataki. Ni sa curuma na papa e dua na isema sega ni vakawelewele, na gacagaca ni ivakatakilakila ni itukutuku e vakayagataki me baleta na vakau itukutuku matata ni itukutuku.

Control-UART
TTL 3.3 V ivakatagedegede, ka rawa ni semati ki na noda isema ni ituvatuva se dua tale na kompiuta e cake me vakamatautaki kina na ivakarau ni vakacokotaki ni papa.

Veimuacagaca ni Matataki ni USB
vakavinakataki kei na vakavinakataki ni parokaramu ni komipiuta. (optional USB recorder function)

Na kaukauwa vakalivaliva ni kakana
tokona na isema vakasuka ni veitaqomaki ni kaukauwa, and supports the power input range of 7~30V. Vakarautaka e dua na veicoqacoqa ni kaukauwa 5V. Na iwiliwili taucoko ni kena vakayagataki na kaukauwa ni cakacaka sai koya na 2.4W (1080Vakabulabulataki P60 H.265), kei na kena levu duadua ena 200mA.

Tudei
ivakatakilakila ni kaukauwa, ivakatakilakila ni cakacaka ni vakacokotaki ni vidio.

The HDMI to IP encoder board size e 70x45x1.2mm (LWH)

Na balavu ni idabedabe e muri e lailai mai na 2.5mm, kei na kena balavu e liu e lailai mai na 6.8mm.

Bibi ni papa
20.6 i gram.

HDMI CVBS composite SDI video input encoder board digital IP ethernet output H264 H265 module board
HDMI CVBS vakacurumi SDI ni vidio encoder papa livaliva IP ethernet output H264 H265 module board

Sikinala ni iVakatakilakila ni iVakatakilakila

1) Rarama ni kaukauwa kei na ivakatakilakila
Na icurucuru ni livaliva ni dromu ni dromu ni 2PIN 2.0mm ni dromu ni yalewa. Ena vakarautaka talega na papa e dua na icoqaqa ni kaukauwa 5V (5V-mai kei na GND rua na fokise ni veisemati), so it is convenient for users to connect the cooling fan to the power supply when necessary. Na iyaloyalo oqo sai koya na ivakamacala ni sikinala ni livaliva kei na ivakatakilakila.

HDMI IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet LAN http rtsp udp onvif tcp ip interface signal
HDMI to IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet LAN HTTP RTSP UDP onvif TCP IP interface signal

Veiliutaki Kaukauwa: iVakatakilakila ni cakacaka kaukauwa, damudamu, dau cakacaka ga ni oti na kena vakaukauwataki;
iVakacokotaki ni Veiliutaki: iVakatakilakila ni cakacaka ni vakacokotaki ni vidio, drokadroka, ena kidacala na gacagaca ena gauna ni vakacokotaki ni vidio. Kevaka e sega ni livaliva na rarama oqo, it means that the encoder board is not performing video encoding(me kena ivakaraitaki, na sega ni rawa ni saravi na vidio e liu).
2)Gacagaca ni vakacuru ni AV, vanua ni gacagaca ni soqo vata, gacagaca ni itukutuku tudei, gacagaca ni vakaraitaka na vakarorogo, USB waqa, sikinala ni gacagaca ni veitaratara
YV-in: vosa vakatautauvata kei na veisemati ni vosa kei na vidio,4Dromu ni PIN 1.25mm dromu ni biu, e tokona na audio o Mic in se Line ena icurucuru.
  • NI (Audio in left), sala imawi ni vakarorogo;
  • AR(Vakarorogo ena imatau), sala dodonu ni vakacuru rorogo;
  • GND, vanua sikinala;
  • NABA NI AV, vosa vakatautauvata ni vidio. (Please ignore the color of the wiring, make sure the fourth jack is CVBS Composite video input.)

HDMI IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet LAN http rtsp udp onvif tcp ip interface signal 2

    HDMI to IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet LAN HTTP RTSP UDP onvif TCP IP interface signal 2

Lewai ni UART: Vakaiyaya ni gacagaca ni isoqoni,4Dromu ni PIN 1.25mm dromu ni biu, TTL 3.3 V ivakatagedegede, vakayagataki me baleta na kena icakacaka ena papa, e rawa ni semati ki na veigacagaca ni veivakadeitaki ni yatu Ni'uida se dua tale na kompiuta host.

iTukutuku-UART: gacagaca ni itukutuku tudei,3Dromu ni PIN 1.25mm dromu ni biu, TTL 3.3 V ivakatagedegede, iwiliwili ni vakau baudroka, kei na so tale na yatu e rawa ni vakamataliataki. Ni sa semati na papa ki na iVcan wireless module, na gacagaca ni ivakatakilakila ni itukutuku e vakayagataki me baleta na vakau itukutuku matata ni itukutuku.

iY interface ni USB:4Dromu ni PIN 1.25mm dromu ni biu, used for the encoder board software upgrade and maintenance.

Veisemati ni vakarorogo:2Dromu ni PIN 1.25mm dromu ni biu, ena papanivolavola e tiko kina e dua na cakacaka ni kena rawa ni vakavinakataki na vakarorogo(Laini ki tuba), ka rawa ni semati ki na dua na rorogo e tautuba se livaliva ni vakarorogo. iDewade ka vakatagitaka na vosa rogoci mai na gacagaca ni veitaratara ni gacagaca ni veitaratara.

Ethernet: Veimuataki ni Icanet,4Dromu ni PIN 1.25mm dromu ni biu

composite video CVBS input to IP RTSP H264 H265 ethernet china module development board
HDMI to IP encoder composite video CVBS input to IP RTSP H264 H265 ethernet china module development board

Ivolakerekere

HDMI Composite CVBS Video to IP encoder stacked COFDM Transmitter board
HDMI Composite CVBS Video to IP encoder stacked COFDM Transmitter board

  1. Done or UAV video encoding
  2. Robotic or mini-control vehicle
  3. Unmanned Vehicles UAV
  4. Unmanned Submarine
  5. The HDMI to IP board can be COFDM modulation module RCB stacked and assembled with a COFDM one-way transmission module. The connection interface is FPC Main (26Veigacagaca ni keveli rawarawa ni PIN mo veiraurau kei na keveli). HDMI+AV encoder + COFDM Transmitter Module
  6. The HDMI to IP encoder board PCBA is connected to a two-way wireless link through the network port. Ena gauna oqo, na veilawa ni kena cicivaki e rawa ni vakamataliataki ena gacagaca ni Mataveilawa ni veitaratara. Me kena ivakaraitaki, tuvanaka na iwiliwili lailai ni vakacokotaki ni vidio, iWalewale ni vakacokotaki ni H264/H265, iwalewale ni vakacuru rorogo, iwiliwili taucoko ni gacagaca, kei na so tale.
  7. The board can be connected to the Control-UART parameter configuration panel to set operating parameters.

Composite CVBS input IP RJ45 Ethernet output Ultra-low latency encoder board HDMI CVBS Encoder
Composite CVBS to IP converter, RJ45 Ethernet output Ultra-low latency encoder board HDMI CVBS Encoder

  1. Mataqali veimuataki ni HDMI: HDMI V1.4
  2. iWiliwili ni iTuvatuva ni Cakacaka ni Icanet: 100MBps
  3. Levu ni ivakarau ni batabata: -40~85 na diqiri
  4. iVakarau ni Cakacaka Veiganiti: iTuvatuva ni Linux

Web UI management Parameter setting

YVT

Na vidio ni HDMI oqo ki na papa ni vakacokotaki ni IP e rawa ni raica na kena ituvatuva ena gauna oqo ena mataveilawa ni Mataveilawa ni veitaratara ka veisautaka me vaka na gagadre ni kena vakayagataki. ena barausa ni gacagaca ni gacagaca ni veitaratara http://192.168.1.30/ (na itikotiko ni IP ni papa ni veivakacokotaki)

1. Yalovinaka dikeva na WEBUI mai na barausa, ena iyaloyalo e ra, kevaka sa donu vinaka na ivurevure ni vidio, then it will show the CVBS or HDMI at the red arrow.

no video input now
sega ni dua na itukutuku ni vidio ena gauna oqo

HDMI encoder can detect the video input source
Na ivakatawa ni HDMI e rawa ni kila na ivurevure ni vakacuru vidio

2. Yalovinaka raica na cina ni LED ni veicokonaki ni HDMI e sauriva se sega.
Kevaka e drokadroka ka sauriva, oti sa qai cakacaka vinaka tiko na ivurevure ni vakacuru vosa ena vidio, ke sega ni yadra, then please check the video input source is ok or not.

HDMI input encoder board encoding light is blink or not.
E sa yavala se sega na cina vakacokotaki ni papa ni HDMI.

Sa rawa me vakamatautaki na iwiliwili ni veivakacokotaki. Sa tuvai tu na gacagaca ni mataveilawa ki na 0.0 me matataka vakai koya (3.12Ena vakayagataki e loma na MBPS). E rawa ni ra veisautaka na kasitama na yavunilewa oqo. Me kena ivakaraitaki, e rawa ni vakamataliataki na 1Mbps~2Mbps se vakalailai sobu.

HDMI To IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet RSTP UDP for UAV Drone Robotic 3

GOP is required to be set to an integer multiple of the encoding frame rate (note that it is the encoding frame rate):
1. Me kena ivakaraitaki, if the camera inputs 1080t60, then the gop is set to 60/120/180 (it is not recommended to set too large)
2. Me kena ivakaraitaki, if the camera inputs 1080t25, the gop is set to 25/50/75 (it is not recommended to set too large)
3. Me kena ivakaraitaki, the camera input 1080i60, due to the need for de-interleaving, all the actual encoding is 1080p30, then the gop is set to 30/60/90
If your video source is CVBS, CVBS has two systems, PAL is 25fps, NTSC is 30fps
if your CVBS is PAL, then GOP set is 25/50/75, if your CVBS is NTSC, then GOP set is 30/60/90.
Na larger the gop setting, the better the image quality, but the size difference between the I frame kei na P frame becomes larger, resulting in the following disadvantages:
1. Large I-frames are prone to frame loss due to wireless transmission;
2. If the gop setting is large, the loss of the I frame will lead to a longer recovery time after the blurred screen;
3. The size difference between I frame and P frame is large, which will increase the transmission delay.
gop要求设置为编码帧率的整数倍(注意是编码帧率)：
1、比如相机输入1080p60，那gop设置为60/120/180(不建议设置太大)
2、比如相机输入1080p25，那gop设置为25/50/75(不建议设置太大)
3、比如相机输入1080i60，由于需要去交织，所有实际编码是1080p30，那gop设置为30/60/90
从上面可以看到，由于输入相机帧率不确定，所以我们一般建议配置0(Auto)
cvbs分制式，pal是25fps，ntsc是30fps
假设是pal，那gop设置25/50/75
gop设置越大，画质越好，但是I帧和P帧的大小差别变大，产生一下缺点：
1、大的I帧容易因为无线传输的原因导致丢帧花屏；
2、gop设置大，I帧丢失导致花屏后恢复时间变长；
3、I帧和P帧大小差别大，会增加传输延迟
  1. We can modify the TS stream over UDP, but the TS stream is a non-standard TS stream that we have modified, which needs to be interpreted by our decoder board or special player (Lavetaka).
  2. If you agree with the RTSP protocol, VLC can play it; if you only agree with the TS stream (due to our non-standard modification), VLC cannot decode and play it, so we must use our special player. (Lavetaka).
  3. If you want to switch to the standard MPEG-2 TS stream to play with VLC, our software engineer can customize the firmware for you (this will take a few days) for an additional fee of USD500.
  4. We use non-standard mpeg-2 ts streams primarily for the following reasons:
    1. The standard mpeg-2 ts stream has too much overhead outside the effective data, making it unsuitable for use with cofdm;
    2. The standard mpeg-2 ts stream is difficult to implement the aes encryption function;
    3. The standard mpeg-2 ts stream is difficult to achieve serial port transparent transmission (used with our decoder board)
  5. If you don't need our decoder board, encryption and serial port transparent transmission, it is also possible to use standard mpeg-2 ts stream
  6. It is recommended that you try our player; in real-time performance, our player outperforms vlc.
    The vlc player's algorithm does not take into account real-time performance; ia me kena isosomi, it will constantly adjust its cache (only increase but not shrink). Ena qai yaco kina, the longer it is played, the longer the delay may be (especially when used with a wireless link)

1. SSL certificate is HTTPS protocol, our products do not support it now, only HTTP.
2. The default encoder board through the RTSP protocol, RTSP is not encrypted. You can set a longer password. And change it frequently.
3. If you want to encrypt, you need to use a pair of our codec boards (with encoder and decoder board as TX and RX), with UDP protocol, and they are using aes256 encryption. (Just like the bank level.)

Io, Dina sara, yalovinaka veitaratara mai vei keitou. Let me list your demand at the below.

1. We need to take a composite analog PAL video signal and transmit it using h264 over MPEG2 TS. OK
2. The output must be playable through VLC. OK
3. UPD://@1030. OK
4. The output network stream packet should be 188 bytes standard mpeg2 TS. OK
5. Compression scheme is h. 264, CVBS PAL input and IP output. OK

How to upgrade the firmware of the CVBS PAL Analog or HDMI video input encoder board IP RJ45 ethernet output?

Vakavinavinaka.
Only CVBS composite video input, we once designed and produced 42x37mm, CVBS composite video source to IP encoder board. (No HDMI input)
If both CVBS and HDMI video input, we can not make it smaller. Except that you allow the use of two PCB boards stacked.

ping encoder board default ip address 192_168_1_30
ping encoder board default ip address 192_168_1_30

Please follow the checkpoints below to confirm.

  1. After connecting the encoder board with your computer by ethernet cable, the LED of RJ45 connector should be blinking or not. (to check the ethernet connection is ok or not)
  2. Is your computer configured with 192.168.1.x network segment ip?
  3. Have you modified the default IP address of the encoding board? If the IP address changed, maybe you can download and use the below software to find what IP address now.
    https://www.advanced-ip-scanner.com/
  4. Or Directly connect the UART cable of the encoding board to the computer, and use the serial port debugging assistant to send the ATGIP_ command.get ip address command Operation Video at Youtube

    iTuvatuva

    ATGIP_

    iVakaraitaki: ATGIP_

    Yatu

    Sega

    Vakayagataki

    mo taroga na itikotiko NI IP ni kena ciqomi

    Lesu mai na yavunilewa

    iVakaraitaki:

    ATGIP_

    ATGIP192.168.0.215 OK

    Itukutuku
    1. ivakaro ni taro
  5. More COFDM UART AT commands, please check this link. https://ivcan.com/encoder-modulator-decoder-demodulator-module-parameter/

These parameters are determined by the camera, only the sensor has it.

One more question: In the future is there any possibility to incorporate these features in the output side of encoder (if we get volume orders) ?

Our Answer: These are the parameters of the isp, and our current encoding boards are all bypass isp (because we don't connect the sensor, we don't need and can't use the isp), so we can't add these parameters.

Io, CVBS input support NTSC and PAL, Automatic detection and adaptation

  1. Na parameter configuration board tool is mainly used for the COFDM module function. If you buy this HDMI / CVBS to IP encoder Vcan1746 separately, you don’t need to buy a parameter configuration board tool, you can adjust the parameters through the Web UI.
  2. Io, e dina, if you want to use the parameter configuration board tool to adjust some parameters of the encoder board, it is also possible.
  3. Me kena ivakaraitaki, the video encoding bit rate can be configured through the Web UI or changed through the extra parameter configuration board tool. The Web UI can configure all the parameters, and the parameter configuration board tool can only adjust some of them.

Io, ke o gadreva, we can offer you the special firmware to have USB recorder function.

HDMI To IP encoder modulator CVBS H.265 H.264 encoding board pcba Ethernet RSTP UDP for UAV Drone Robotic 4

Taro: Does your USB DVR support playback on the encoded video?

Na kena isau: Sega, The USB has the record function. You need to play it on a computer, it can not playback on the encoder board directly.

  1. Do you mean HDMI or AV input, or do you need HDMI and AV to support two simultaneous inputs?
  2. Currently it supports either HDMI or AV input.
  3. Vcan1746 can only choose one of HDMI/AV at present, other boards can meet the firmware you need, but this board only supports SDI + AV/AHD output.
  4. If necessary, you can evaluate the board with SDI + AV/AHD input to see if it meets your requirements. Kevaka e io, our HDMI + AV input Vcan1746 can be made the same later.
  5. If you really need to evaluate the HDMI + Veisemati ni AV, please first buy Vcan746 and burn the default shipping firmware for testing. HDMI and AV can be selected for use. If there is a certain amount of follow-up orders, we can develop a special firmware to support HDMI+AV input at the same time.
  6. The display of HDMI and CVBS video input by two channels at the same time is similar to Hikvision IPC, which is divided into main bit rate and sub bit stream. The main stream corresponds to HDMI, and the sub stream corresponds to CVBS.
  7. Now we can develop a new firmware to support HDMI and CVBS to live streaming at the same time, but the audio can only be selected from one of the two (the system selects HDMI audio/analog audio according to the video access situation).

hdmi rca cvbs encoder ip output for live stream RTSP player supports two video streams
hdmi rca cvbs encoder ip output for live stream RTSP player supports two video streams

hdmi rca cvbs encoder ip output for live stream RTSP player supports two video streams
hdmi rca cvbs encoder ip output for live stream RTSP player supports two video streams

HDMI video input to IP RJ45 output encoder converter
HDMI video input to IP RJ45 output encoder converter

hdmi cvbs rca composit video encoder for RTSP player shows HDMI camera and CVBS camera
hdmi cvbs rca composit video encoder for RTSP player shows HDMI camera and CVBS camera

Supported.

Our HDMI and CVBS input video encoding board has a USB interface, which can be used for USB recording. It can also be used as the input interface of a USB web camera.
Ena sala oqo, our video encoding board can convert the signal of your USB web camera into a network interface, while supporting ultra-low latency and supporting h264 and h265 encoding.

Dua tikoga na nomu taro?

Yalovinaka veitaratara mai me baleta na ikuri ni ivakamacala.

Vakauta Na Nomu Taro

HDMI Video Sources Input IP Ethernet Output encoder, VLC RTSP operation

Industrial-grade temperature range from -40°C to 70°C Celsius test

Support HDMI and CVBS 2 video streams at the same time

How to get the IP address of the encoder back if you forget

More FAQ

Video Encoder and Decoder FAQ

HDMI input IP ethernet output encoder board with cables
HDMI/3G-SDI/LVDS to IP Live Streaming Video Encoder H.264/ H.265 IPTV with RTSP UDP

HS Code

8517629900, Some of our customers use this HS code for your reference.

Special Function Custom Development

  1. HDMI and CVBS Dual Video Encoding

  2. USB has a video recording function.

  3. Special handling of encoding formats to match your custom decoder board

скачать видеокодер

 

Veisemati na ivoli

OFDM Wireless Video Transmitter for IP camera lightweight long-rang transmission auto networking RJ45-2

Transmitter ni vidio

IP mesh ad hoc transceiver OFDM transmitter receiver wireless itukutuku ni itukutuku transmission me baleta na drone IP itaba veilawa

Low Latency SDI AHD CVBS In Video encoder IP Ethernet Output for drone

Transmitter ni vidio

Low Latency SDI AHD CVBS In Video encoder IP Ethernet Output for drone composite AV H265 encoding PCBA

$380.00 – $650.00
Mini Size HDMI Encoder Board Over IP Ethernet RJ45 Output modulator H.265 HTTP RSTP UDP ONVIF

Dua na Sala Vakaiyauyau

Levu lailai HDMI Encoder papa ni IP Ethernet RJ45 Output modulator H.265 HTTP RSTP UDP ONVIF TCP

$199.00
Wireless video data transceiver bidirectional transmitter and receiver

Rua na Sala ni Veivakatarogi

15km 30km 80km 150km 150km ni gacagaca ni vidio ni veitaratara vakayawa ni iciqociqo ni vakau itukutuku ena PA 2W 5W 10W

IP Mesh Ad Hoc Network video data transceiver Module support WIFI ethernet

TX RX Module

Mesh Ad hoc networking module handheld veikauyaki vakacurumi Vcan1874

China cofdm wireless digital audio video transmitter and receiver module board PCBA for UAV NLOS

TX RX Module

Jaina cofdm isema ni vakarorogo vakalivaliva ni vakarorogo vakalivaliva transmitter kei na receiver module board PCBA me baleta na UAV NLOS

Best FPV Video Transmitter Module 170-860Mhz Wireless RF audio video Transmissionr for FPV Camera 3W PA 50km

COFDM

FPV vidio Transmitter vinaka duadua module 170-860Mhz isema ni vidio ni RF Transmitter me baleta na FPV itaba 3W PA 50km

10W PA 100KM airborne video data link long range tactical handhold UAV wireless transmission transmitter receiver

Rua na Sala ni Veivakatarogi

10W PA 150KM na itukutuku ni vidio ni sala ni waqavuka isema balavu UAV ni retioyaloyalo isema ni vakau iciqoqociqo ni misini ni cakacaka ni ligahold

Biuta e dua na isaunitaro

Ena sega ni tabaki na nomu itikotiko ni imeli. Sa makataki na lomanibai e gadrevi *

Raica eso tale na ka mai na iVcan.com

Volayaca oqo mo wiliwili tikoga ka raica na akaivi taucoko.

Tomana tikoga na wiliwili

Gadreva na Veivuke ena WhatsApp?