4K HDMI Placa decodificadora de codificador de vídeo HDMI a Ethernet y Ethernet a HDMI RTSP UDP

Característica

• Low Latency Video Encoder/Decoder: Supports H.265/H.264 encoding and decoding with full HD resolution, up to 3840x2160P at 30 frames per second.
• Códec de audio: Includes audio input and output capabilities.
• Video Encoding Functionality:
  • Aporte: HDMI
  • Producción: Streams via Ethernet using RTSP/TS protocols
  • Protocolos admitidos: TCP and UDP
• Video Decoding Functionality:
  • Aporte: Streams via Ethernet using RTSP/TS protocols (TCP and UDP)
  • Producción: HDMI
• Management Interface: Accessible via a web UI or UART.
• Pairing Capability: The one 4K encoder can be paired with another 4K decoder for low latency operation, achieving approximately 100ms latency for 1080P60 H.265 video.

Introducción

Especificación

OI

entrada de vídeo de alta definición	HDMI, type A connector.
HD video output	HDMI, type A connector.
Analog audio input / producción	3Conector PIN PH1.25mm.
UART de datos	3Conector PIN PH1.25mm, TTL 3,3 V, baud rate adjustable.
Control-UART	4Conector PIN PH1.25mm, TTL 3,3 V, baud rate adjustable.
Servidor USB	4Conector PIN PH1.25mm, for software upgrading and USB disk recording When works as video decoder.
W/2.5W HD video COFDM transmisor de enlace descendente inalámbrico con interfaz de entrada HDMI o SDI o AV El transmisor de video digital inalámbrico fue diseñado para su uso	2Conector PIN PH2.0mm.
Ethernet1	4Conector PIN PH1.25mm.
Ethernet2	4Conector PIN PH1.25mm.
FPC_main	To connect with our COFDM modulator.

Vídeo y audio

Entrada de video / producción	HDMI
Formatos de vídeo	3840P30, 3840P25, 3840P24, 1080P60, 1080P50, 1080I60, 1080I50, 1080P30, 1080P25, 720P60, 720P50, 720P30, ……
Vídeo encoding or decoding	H.265/H.264, setup via control UART or Web UI; Bitrates adjustable; Supports proprietary H.265/H.264 video compression only used p-frames for the lowest latency(the 4K encoding plus 4K decoding latency is about 130ms for 1080P60 video).
Entrada de audio / producción	Embedded HDMI or analog audio.
Codificación de audio	CAA, 16poco, mono, 48Kbps
Ethernet stream protocol	UDP TS stream, RTSP stream, UDP TS stream + RTSP stream

Seguimiento y control

Comprehensive setup via web UI or AT command via control UART.

Rango de temperatura

Especificaciones completas: 0° a +70°C Ambiente (Opcional: -40° to +85°C )

Almacenamiento:–40° to +85°C

Características físicas

Dimensiones: 80*50mm(not including connectors out of the board)

Peso: 27gramo

Requisitos de energía

Rango de entrada: 7~30VDC

El consumo de energía: <250mA@12V

I/O signals

The power input interface is a 2PIN PH2.0mm connector. The module board also provides a 5V power output for fan that it may be required when the module is integrated with wireless modules.

UART de datos

The 4K module supports one channel uart data packed with the stream and transmitted via the Ethernet. When 4K encoder works paired with 4K decoder and Ethernet linker (wireless or wire), the data to this uart will be transferred to the remote 4K uart.

Controlar UART

4Conector PIN PH1.25mm, TTL 3,3 V. The 4K board system can be set-up via this control uart with AT command.

Audio in and Audio out

3Conector PIN PH1.25mm. When 4K encoder board works paired with 4K decoder board and Ethernet linker (wireless or wire), it supports bidirectional voice communication. The analog audio input can be line in or Mic in, the analog audio out is designed to output to earphone or audio amplifier.

Ethernet1 and Ethernet2

Two 4PIN PH1.25mm connector, 100M ethernet port.

When the 4K board is shipped as an independent encoding or decoding board, Ethernet1 and Ethernet2 are internally set to bridge, with the same IP addresses for both network ports. The input or output of video data is through the Ethernet1 interface, and Web UI access is through the Ethernet2 interface; Ethernet1 supports connecting with our bidirectional wireless transmission modules or other third-party bidirectional linkers. Ethernet1 supports UDP TS stream, RTSP stream and UDP TS stream + RTSP stream.

 

When using the 4K board with our COFDM wireless transmitter modulator module (connected through FPC-Main interface via flat cable), Ethernet1 and Ethernet2 are internally set as two independent network ports, with different IP addresses.For this application, the Ethernet1 interface cannot be used externally because network signals are multiplexed to the FPC-Main interface.The Ethernet2 interface can be used as an access network port for the Web UI, or can connect to the IP camera through the Ethernet2 network port. The IP camera video signal can be transmitted through the COFDM wireless module modulator. The below picture shows 4K module connecting with our COFDM transmitter modulator module.

4K& COFDM transmitter modulator module

LEDs and GPIO

There are three signal indicator lights (LED1/LED2/LED3) on the right side of the 4K module board, and the indicator light signals are simultaneously connected to the J6011 connector PINs (4PIN 1.25mm connector). Some customers may need to assemble indicator LEDs on their housing case, then they can use J6011 connector PINs to add indicator LEDs on their housing case.

When the 4K works as an encoding board, the corresponding signals of the indicator lights are as follows:

LED	Descripción	Corresponding J6011 PIN
LED1	Power-LED: red color, constant light when the board is normally powered.	LED1-PIN
LED2	Green color, constant light when the input video is detected successfully, otherwise it will not light.	LED2-PIN
LED3	Encoding-LED: green color, blinks when video encoding normally.	LED3-PIN

When the 4K works as a decoding board, the corresponding signals of the indicator lights are as follows:

LED	Descripción	Corresponding J6011 PIN
LED1	Power-LED: red color, constant light when the board is normal powered.	LED1-PIN
LED2	Green color, constant light when video is being recorded with USB disk, otherwise it will not light.	LED2-PIN
LED3	Decoding-LED, green color, blinks when video stream is normal received and decoding	LED3-PIN

When using J6011 PIN signal to connect LED indicator lights externally, el “positive pin” of the external LED2 and LED3 indicator lights should be connected to the corresponding J6011 PIN, y el “negative pin” should be connected to any GND on the 4K board; When connecting the external LED1 power indicator light, connect the “positive pin” to the J6011 LED1-PIN and the “negative pin” to any GND on the 4K board.

GPIO signal on J6011 connector: reserved GPIO for using as special customized software.

Preguntas más frecuentes

Q1: Does it support CVBS analog video input?
A1: No, only HDMI video input.

Q2: Can you offer me with a metal box?
A2: Seguro, Por favor revise las siguientes imágenes.

Q: What is the difference between the 4K decoder board I purchased and the other 4K + CVBS decoder board (model 2227)?
UN: Our engineer would like to remind you that the 4K board you purchased supports both encoding and decoding. sin embargo, when used as a decoder, it only supports up to 4K at 30 FPS.

If you require 4K at 60 FPS, we recommend the alternative model 2227 board. This board:

• soportes 4K 60 FPS decoding
• Is slightly larger in size
• soportes CVBS video output
• Is offered at the same price

aplicaciones

1. Real-Time Aerial Video Streaming

The board can be used for real-time video streaming from drones to ground control stations, providing high-quality 4K video feeds for surveillance, cartografía, and inspection. Its low-latency encoding and decoding capabilities make it ideal for live broadcast scenarios, where high-quality, real-time video is crucial for decision-making.

2. Vigilancia aérea & Escucha

Drones equipped with the 4K HDMI encoder can be used for aerial surveillance, capturing 4K video from high altitudes and transmitting it over Ethernet or wireless links. This is particularly useful for public safety, military reconnaissance, o environmental monitoring. The ability to stream video in HD or 4K resolution ensures clarity for critical operations.

3. Drones for Search & Rescue Operations

In search and rescue missions, drones need to transmit live video feeds to ground crews to locate missing persons or assess disaster zones. The encoder-decoder module allows for seamless HD/4K video transmission, incluso en entornos desafiantes, helping rescue teams get crucial, real-time visual information from the drone.

4. Inspection of Infrastructure and Critical Assets

Drones are increasingly being used for inspecting infrastructure such as power lines, bridges, and oil pipelines. The encoder module allows for high-definition video recording and streaming to ground systems, enabling remote inspections and reducing the need for manual inspections in dangerous or hard-to-reach areas.

5. Broadcasting and Live Streaming from UAVs

The board’s capability to stream high-definition video with baja latencia makes it perfect for live broadcasting applications, como eventos deportivos, aerial cinematography, o drone racing. The ability to handle real-time, high-quality video streaming is essential for professional-grade broadcasts.

6. Integrated with COFDM for Wireless Communication

When paired with a COFDM (Multiplexación por división de frecuencia ortogonal codificada) módulo, this encoder-decoder system is perfect for creating a long-range, wireless communication link between drones and ground stations. This integration allows for reliable, high-quality video transmission even in sin línea de visión (NLOS) entornos.

7. Remote Control and Telemetry Data Transmission

The module can transmit not only video data but also telemetry data (via UART) over the same Ethernet link. This is essential for mando a distancia of UAVs and monitoring flight parameters (P.EJ., altitude, velocidad, battery life) in real-time.

8. Military and Defense Applications

In military settings, UAVs are used for intelligence gathering, reconnaissance, y vigilancia. The encoder-decoder board ensures the secure and efficient transmission of HD/4K video streams to ground units, offering strategic advantages during operations in areas with poor or unstable connectivity.

9. Agricultural Drones

Drones used in precision agriculture can benefit from high-definition video streaming for crop monitoring y field inspections. The encoder module allows for the transmission of detailed video, helping agricultural experts monitor large areas efficiently and make timely decisions based on visual data.

10. Training and Simulation

In drone training and simulation entornos, the board enables the real-time transmission of live drone footage to instructors and students. This makes it easier to provide training sessions y simulate real-life scenarios that require visual observation and tactical decision-making.

 

Opciones de personalización

1. Video Resolution and Frame Rate:
   • The board supports 4K (3840x2160P) resolution at 30 fps and can be configured for other resolutions such as 1080P60, 1080P50, and 720P60. You can select the resolution and frame rate based on the specific needs of your project.
2. Custom Firmware:
   • The module can be equipped with optional firmware to support additional features such as split-screen mode for displaying up to four 1080P video channels. You can also request modifications to the firmware to suit unique application requirements.
3. Audio Options:
   • The board supports both HDMI embedded audio and analog audio input/output, which can be configured for your specific system. You can also choose different audio codecs such as AAC (16poco, mono, 48Kbps) to meet your needs.
4. Control Interface Customization:
   • The management interface can be customized either via a web UI or a UART control interface. You can request custom control protocols or configurations for better integration with your existing system.
5. Network Protocol Customization:
   • The board supports multiple Ethernet streaming protocols, including UDP TS stream, RTSP stream, and a combined UDP TS + RTSP stream. Depending on your network infrastructure, you can adjust the protocol settings to suit your environment.
6. Physical Enclosure:
   • The module can be delivered with a customized metal box or housing, providing additional protection and mounting options. The box can also include customized connectors or slots for easy integration into your system.
7. GPIO and LED Indicators:
   • The GPIO signal and the LED indicators can be customized for specific signaling needs. Por ejemplo, you can integrate external LED indicators or customize the control signals via the J6011 connector.
8. Power Input/Output:
   • The power input can be customized to suit your device’s power requirements, ranging from 7V to 30V DC. Además, the module offers a 5V power output for use with cooling fans or other components in integrated systems.
9. Temperature Range:
   • The module comes with standard temperature specifications (0° to +70°C), but for demanding environments, it can be customized to handle a wider temperature range from -40° to +85°C.

This board can be tailored in a variety of ways to fit your specific video streaming, encoding/decoding, and networking needs. Let me know if you need any further details or specific configurations!