Lilliput GK-7000 show error
If your Lilliput GK7000 devices show the above picture of startup wrong, please try to download the factory restore firmware.
Lilliput GK7000 upgrade steps
- Please download the upgrade firmware from the below link. https://drive.google.com/file/d/1GYmpZkDTz4LpFseNKdakgU7Vk8ZEfHSy/view?usp=sharing
- Prepare a one-piece Kingston 4G SD or 8G SD card, poseu el fitxer "NK.bin” copiar a la targeta SD. Nota: Si us plau, no flasheu fitxers no relacionats amb el GK-7000, en cas contrari, danyarà el monitor.
- Col·loqueu la targeta SD "nk.bin" a la ranura GK7000, to give the power to GK7000. As shown in the below image, show you the upgrading progress bar. Please wait until 100%.
- Si es completa, el monitor entrarà automàticament al sistema. A continuació, traieu la targeta SD.
- Upgrade OK and you will see that it is ok now.
GK-7000 Upgrade firmware download
GK-7000 | recuperació del firmware per defecte de fàbrica |
How to get the printing information?
The most important step in troubleshooting is to turn on the power to obtain the RS232 serial port printing information. Then send the printed information to us for analysis.
How to operate and steps guide?
1. ajust
- Descarrega't el GK-7000 serial port tool.
- Copy the file named DNW.exe activat el PC, llavors obriu aquest fitxer;
- Primer, feu clic a "Configuració → Opcions” al menú i entreu a la finestra de configuració.
- Aleshores, establir el Número de port COM (el número de port COM el decidirà el port COM que RS232 connecta a l'ordinador), Velocitat de transmissió: 115200. Descarrega l'adreça: 0x32000000;
- finalment, Feu clic a "D'acord" per sortir d'aquesta finestra de configuració.
2. Feu clic a "Port sèrie → Connecta” al menú per obrir el port COM.
3. Continueu prement la tecla "ESC" del teclat, al mateix temps, encendre el
PC745/GK7000, aleshores la finestra DNW imprimirà la informació relacionada que es mostra a continuació.
Acabar!
Preguntes freqüents
Q1: Què he de fer si hem baixat i actualitzat el vostre microprogramari, però no va resoldre el problema?
A1: Doneu-nos el número de sèrie de cada unitat defectuosa, el nostre enginyer comprovarà la versió de maquinari i firmware de la vostra existent. Us oferirem el firmware relativament actualitzat.
7 polzades Embedded PC Mobile Data Terminal MDT Panell de pantalla tàctil GK-7000
Lilliput GK-7000 Llum vermella a bord i llum groga al botó d'encesa i cap pantalla mostra quin és el problema en aquesta situació
Mètode de resolució de problemes: Si us plau, enceneu-lo per obtenir la informació d'impressió del port sèrie RS232. Envieu-nos la informació, gràcies. Utilitzem la informació per solucionar problemes. A més, si us plau, fes un vídeo perquè el vegem, perquè puguem solucionar millor el problema.
https://ivcan.com/lilliput-gk7000-firmware-recovery-the-factory-default/#How_to_get_the_printing_information