ড্রোন FPV রেডিও টেলিমেট্রি ডেটা লিঙ্ক ফ্রিকোয়েন্সি কাস্টমাইজড
It is suitable to develop a drone data transmission module with a different frequency. The unique personal customized frequencies can avoid the busy Microhard data transmission range 902~928Mhz
সুচিপত্র
ভূমিকা
This is a newly launched digital transmission module, which is a small module with strong anti-interference ability. The device uses digitized signals through source coding and channel coding, transmits through digital channels, or stores them through digital storage and recording devices.
সুবিধা
- Strong digital communication confidentiality
- শক্তিশালী বিরোধী হস্তক্ষেপ ক্ষমতা
- Long transmission distance and good stability
- With relatively low transmission delay, real-time transmission can be achieved
- Can be directly connected and controlled through mobile phones or tablets, easy to install and use
সবিস্তার বিবরণী
| Transmitter frequency range | 128MHZ-1G (ফ্রিকোয়েন্সি কাস্টমাইজ করা যায়) |
| রিসিভার ফ্রিকোয়েন্সি ব্যাপ্তি | 128MHZ-1G (ফ্রিকোয়েন্সি কাস্টমাইজ করা যায়) |
| অপারেটিং ফ্রিকোয়েন্সি ব্যান্ড | 128MHZ-320MHZ，330MHZ-640MHZ、675MHZ-1G |
| ক্ষমতা | 1-3ওয়াট |
| Input source | সিরিয়াল পোর্ট, SUBS |
| শক্তি খরচ | 4ওয়াট |
Definition of serial port
Indicator light description
Blue Light: Send Light After the connection is successful, the blue indicator light is always on, indicating that the data is being sent
সবুজ আলো: After the connection is successful, the green indicator light is always on, indicating that the data is being received
রেড লাইট: The power-on indicator stays on after the power-on
বিঃদ্রঃ: পাওয়ার অন করার আগে অ্যান্টেনা ইনস্টল করা আবশ্যক, and then powered on
Product Installation Instructions
ইনস্টলেশন গাইড
- For the transmitter, install the antenna before powering it on, অন্যভাবে, it will cause circuit damage.
- Please ensure that the power supply voltage of the transmitter and receiver is within the specified voltage range, otherwise the circuit will be damaged.
- Try to make the transmitter antenna vertically upwards and obscure it by obstacles to avoid shortening the communication distance due to blocking.
- The antenna of the transmitter and receiver should be as far away as possible from the conductive parts.
- Be sure to use the specified model of the antenna to ensure that the frequency band, প্রতিবন্ধকতা, এবং অন্যান্য পরামিতি মেলে.
- Pay attention to keeping a suitable distance between the electronic equipment during installation, to minimize the electromagnetic interference between the equipment.
Usage Guidelines
- Please ensure that all cables are securely fastened and that the connections are correct.
- The power cord and serial port cable of the air terminal and the ground terminal are connected to the equipment
- 12ভী পাওয়ার সাপ্লাই
- Open the serial port tool page, identify the serial slogan, select the baud rate of 57600, and click to open
- After turning on, the red light and the blue light are on, indicating that the connection is successful
- After the connection is successful, the data can be sent
PCBA Layout
USB Driver
CP210x-Driver for Vcan2061.rar
লিয়াম –
Enjoy the unrestricted freedom of flight, soaring without hindrance or impediment! I was able to save my drone missions in crowded urban areas by customizing the frequency at which they were conducted. Because there are no more signal clashes with other pilots, you’ll enjoy smooth telemetry data, even when operating in environments with a high density of radio frequencies.