User manual for wireless video transmitter HD
Disclaimer
- Please read the user’s manual carefully before use. Be sure to pay attention to the warnings and understand all points completely.
- Please strictly abide by the local radio frequency management regulations.
- Please follow the installation steps in the manual to use this product. Our company and agent will not take legal responsibility for the damage of equipment or personnel caused by the installation and modification of users.
- This copyright of this manual belongs to Great Mainlink Tech Co., LTD. No one may make copies without written consent.
謹慎
Attention to installation
1. Before power on, make sure the antenna connection is reliably . 否則, it will cause damage to the device.
2. Make sure that the voltage is within the range of use.
3. Please pay attention to the EMC of all the electronic equipments on your drone.
4. It is recommended that the antenna should be installed downward and keep the antenna away from the metal on the drone.
5. Make sure to use the matching antenna.
Before use
1. Make sure that all cables are connected correctly and firmly.
2. No foreign objects (例如. liquids, sand, 等) can be entered inside the device.
3. It takes 15 seconds for the device to start. Video and data cannot be transferred until the device has finished booting.
4. Please ensure that the environment in which the equipment is used is free of other electromagnetic interference.
5. When the signal weakens, you can improve the effect by changing the heading direction of the antenna.
裝箱單
Device X 2
概述
Industry drone market is developing very fast in recent years. The fight time and distance of drones are getting longer and longer. MK22/MK55, a long-range wireless transmission system, is designed for VTOL fixed wing and other long-range drones. The system can transmit video, fight control data, 金巴控制數據, and RC data simultaneously. With the advantage of high level intergration and powerful function, MK22/MK55 is a typical good product to meet long-range transmission requirements.
There are two frequency bands——800MHz、1.4GHz and 2.4GHz. Users can choose according to their needs. Please choose the suitable frequency band according to local regulations.
MK22 can transmit data and video to 22km, MK55 can transmit data and video to 55km, making it very suitable for long range drone.
If you use our recommend ground station, you only need one cable with connector to connect the device and your ground station.
*1Test under LOS and no interference conditions。
特征
Long distance Modulation
-MK22 Up to 22km @ LOS– ofdm
-MK55 Up to 55km @ LOS
Video interface Data interface
– Ethernet *1 – UART（TTL/RS232）/SBUS，
Hopping/Fixed Frequency 頻帶
-固定: user defined – 800MHz/1.4GHz/2.4GHz
-Hopping: 自動 Working mode
BW系列 – Air unit can be ：Point to point mode
-5/10/20 MHz Repeater mode
工作溫度 Power range
– 40+C+70°C。 – DC 9~28V Battery 3S~6S
M52 Interface Description
空氣單元
side view
以太網
| 數量 | Character | 描述 | Input/Output |
| 1 | T+ | 斷續器+ | O |
| 2 | T- | Tx- | O |
| 3 | R+ | 斷續器+ | 我 |
| 4 | R- | rx- | 我 |
2. UART1
| 數量 | Character | 描述 | Input/Output |
| 1 | g | 吉安达 | 輸入/輸出 |
| 2 | R | RS232 RX | 我 |
| 3 | T | RS232 TX | O |
3. UART2
| 數量 | Character | 描述 | Input/Output |
| 1 | g | 吉安达 | O |
| 2 | R | TTL RX | 我 |
| 3 | T | TTL TX | O |
4. 功率
| 數量 | Character | 描述 | Input/Output |
| 1 | g | 吉安达 | 輸入/輸出 |
| 2 | V | +Vcc（9v~28v） | 我 |
5. SBUS1
| 數量 | Character | 描述 | Input/Output |
| 1 | S | SBUS OUT | O |
| 2 | V | +5v（I max 1A） | O |
| 3 | g | 吉安达 | 輸入/輸出 |
6. SBUS2
| 數量 | Character | 描述 | Input/Output |
| 1 | S | SBUS OUT | O |
| 2 | V | +5v（I max 1A） | O |
| 3 | g | 吉安达 | 輸入/輸出 |
7. 功率指示器
This indicator is solid green when air unit is booting.
8. Link indicator
| LED Pattern Description |
| solid green Wireless link is established |
| light off Wireless link is lost |
9. Status Indicator
| LED Pattern（Blink only in booting） Description |
| Blink 2 times Initialization OK, Frequency is 1.4GBlink 1 time Initialization OK, Frequency is 800M |
| Blink 3 times Switch mode (Swith from air to ground, vice verse) |
| Blink slow all the time Enter configuration mode |
| Blink fast all the time Device abnormal |
10. SMA antenna connector.
- Fiber glass antenna.
- OLED display.
- 电
- 連接.
| 數量 | 描述 | Input/Output |
| 1 | Rx+ | 我 |
| 2 | Rx- | 我 |
| 3 | Tx+ | O |
| 4 | 斷續器- | O |
| 5 | UART1 TX (RS232) | O |
| 6 | UART1 RX (RS232) | 我 |
| 7 | UART2 TX (RS232) | O |
| 8 | UART2 RX (RS232) | 我 |
| 9 | 數控 | |
| 10 | RC1_IN | 我 |
| 11 | RC2_IN | 我 |
| 12 | +5v | O |
| 13 | 吉安达 | 輸入/輸出 |
| 14 | 吉安达 | 輸入/輸出 |
| 15 | 吉安达 | 輸入/輸出 |
| 16 | 吉安达 | 輸入/輸出 |
| 17 | 吉安达 | 輸入/輸出 |
| 18 | 吉安达 | 輸入/輸出 |
| 19 | Vcc (9v~28v) | 我 |
| 20 | Vcc (9v~28v) | 我 |
规范
| 类别 | 項目 | 細節 |
| 無線效能 | 頻帶 | 800MHz/1.4GHz |
| 频率范围 | 800MHz：806MHz～825MHz1.4GHz：1427MHz～1447MHz2.4GHz: 2400~2480MHz | |
| Band width | 5MHz/10MHz/20MHz | |
| 调变 | ofdm | |
| EIRP公司 | MK22: 30dBm±1dBMK55: 33dbm =1dB。 | |
| 靈敏度 | ≤-95dBm | |
| 范围 | MK22: 22公里MK55:55公里*1 | |
| 比特率。 | 30Mbps@20MHz。 | |
| 功率範圍 | 直流9~28V。 | |
| 电力消费 | ≤8.5W | |
| 接口 | 天线 | sma *2 |
| 功率 | XT30 | |
| Uart | TTL 3.3V，1 開始位。, 8 數據位, 1 停止位, 冇奇偶校验。, 鲍德率115200 （默認），57600, 38400, 19200, 9600 | |
| UART1同UST2 | ||
| 斯布斯 | SBUS_IN | |
| SBUS_OUT | ||
| 以太網 | 4 針 | |
| 撳掣 | 1 | |
| 開關 | 用于空氣同地面掣 | |
| 天线 | 接口 | sma |
| 類型 | 空氣：Glue stick antenna 20cmGround：Fiber glass antenna, penal antenna | |
| 極化類型。 | 垂直 | |
| 獲得 | 空氣：2.5dBiGround：12dbi | |
| swr | 羸2.0。 | |
| 環境 | 工作溫度 | -40+C+70°C。 |
| 貯存溫度 | -40+C+85°C。 | |
| 濕度 | 5+95%，非凝結 | |
| 外觀 | 大小 | 112 X 63.5 X 19 mm |
| 重量 | 143g |