CVBS HDMI encoder for live streaming

What is a CVBS HDMI encoder for live streaming?

CVBS HDMI encoder for live streaming is a device that supports CVBS analog TV composite video input and HDMI 1080P high-definition video input; The board output is IP RJ45 and supports RTSP player and UDP player, which means it connects the board to the internet. Your video sources will become the stream and play on the internet.

FAQ

Q1: Ṣe tirẹ CVBS HDMI encoder for live streaming support MPEG-2 TS over UDP supported?

A1: bẹẹni. Our CVBS HDMI encoder for live streaming supports MPEG-2 TS over UDP.
https://ivcan.com/p/hdmi-to-ip-encoder-modulator-cvbs-h-265-h-264-encoding-board-pcba-ethernet-lan-http-rtsp-udp-onvif-tcp-ip/

Q2: Dipo RSTP, I need an MPEG-2 Transport stream

A2: Do you need DVB-t RF out, which supports the Transport Stream?

Q3: ko si, just CVBS input and Ethernet out, Ethernet protocol: H.264. For compression, MPEG-2 TS on UDP broadcast, I need a quote for 5 qty and a complete datasheet.

A3: Vcan1746 can output the TS stream over UDP, but the output TS stream is a non-standard Transport Stream that we have modified, which needs to be interpreted by our decoder board or player.

Q5: What should I do if I can’t ping the encoder board from my computer?

Directly connect the UART USB ti awọn fifi koodu si kọmputa, and use the serial port debugging assistant to send the ATGIP_ command. Get IP address command Fidio iṣẹ ni Youtube

1. I can get the sub-stream quickly, but the mainstream needs to get it after reboot. What should I do?

Mo ti ni idanwo kooduopo rẹ ni ọpọlọpọ igba pẹlu eto wa. O n ṣiṣẹ daradara ni apapọ.
But we have one big issue to validate its usage :
Nigbakugba ti a ba tan kamẹra eto ati kooduopo ni akoko kanna, we cannot read the “mainstream”, we can only read the “sub-stream”.
We have to “Reboot” the encoder via the web interface to make it work: after the reboot, we can directly read the mainstream.
We tried with both VLC and Gstreamer.
Kini a le gbiyanju lati ni awọn ṣiṣan mejeeji ni kika lori ibẹrẹ?

iVcan reply: Ni ero ti wa Enginners, it is either a problem with camera recognition or a problem with customer use.

I suspect that the board card did not recognize the customer’s HDMI camera.
This is easy to verify (if you cannot access the sub-stream, it will be difficult to verify).
Log in to the web server of the encoder board and you can see the camera recognition status on the video page.


The video page will only display the recognition status of one camera. If HDMI and AV cameras are connected and recognized at the same time, the video page will display the recognition status of the HDMI camera (such as 1080p60):
As long as the HDMI camera can recognize it normally, Mainstream can be accessed normally.
If the HDMI camera is not recognized normally, please check the HDMI wiring and power on the board again (ṣe akiyesi pe eyi jẹ iyipo agbara, kii ṣe sọfitiwia tun bẹrẹ ni oju-iwe wẹẹbu)

Ni afikun, awọn ọkọ nlo a ID Mac adirẹsi, nitorinaa adirẹsi Mac yoo yipada ni gbogbo igba ti a tun bẹrẹ.
Fun awọn ẹrọ pẹlu kaṣe ARP kan (bii PC), lẹhin ti tun bẹrẹ, yoo jẹ igba diẹ (iṣẹju diẹ) ko le wọle si igbimọ lati nẹtiwọki. , A ko le wọle si titi ti ibeere arp yoo tun bẹrẹ lẹhin igbati o ti pẹ (iṣẹ naa ni pe igbimọ ifaminsi ko le ṣe pinged fun awọn aaya pupọ lẹhin ti o tun bẹrẹ)
nitorina, Mo gboju pe iṣeeṣe miiran ni pe nigbati alabara wọle si ojulowo, ko le wọle si nitori awọn idi ti o wa loke. Lẹhinna nigbati alabara wọle si iha-sisan, kaṣe arp sọtun ati alabara le wọle si, ṣugbọn alabara ko tun ṣabẹwo si ṣiṣan akọkọ.

Nigbakugba ti a ba tan kamẹra eto ati kooduopo ni akoko kanna, a ko le ka "Mainstream", a le ka “subStream” nikan.

Idajọ lati apejuwe rẹ nibi, o dabi pe kamẹra rẹ ti bẹrẹ lẹhin igbimọ fifi koodu wa. Jọwọ bẹrẹ kamẹra rẹ ni akọkọ, ati lẹhinna tan-an ki o bẹrẹ igbimọ fifi koodu wa lati gbiyanju rẹ. Boya o ko ni agbara ni akoko kanna. Ilana ti o ni agbara tun ṣe pataki. Fun apere, ibere kamẹra rẹ nilo 10 aaya, ṣugbọn ibẹrẹ igbimọ koodu koodu wa nilo nikan 5 aaya.

Nitori Emi ko ni idaniloju boya kamẹra rẹ lọra pupọ lati ṣe ipilẹṣẹ lẹhin ti agbara-lori.
Nitori igbimọ koodu koodu wa bẹrẹ ni iyara pupọ, o le jẹ pe kamẹra ko ti ni ipilẹṣẹ lẹhin ti o bẹrẹ igbimọ koodu koodu wa, eyi ti o le ja si diẹ ninu awọn airotẹlẹ isoro. This can also explain why “We have to “Reboot” the encoder via the web interface to make it work: after the reboot we can directly read the mainStream.”, because when your web page restarts the encoder board, the camera has already been initialized.

nitorina, the final suggestions are as follows (I tried my best to list everything that came to mind and let you test them separately);

  1. Look at the video page of the web server and confirm whether the HDMI camera is recognized normally (you can send a screenshot to us). As long as the camera is recognized normally, Mainstream can be accessed;
  2. It is recommended that you ping the coding board under cmd first, ati lẹhinna wọle si mainStream ati subStream labẹ vlc lati yago fun ero aṣiṣe pe Mainstream ko le wọle si nitori awọn ọran mac laileto.
  3. Jẹ ki o bẹrẹ kamẹra rẹ ni akọkọ (fun iṣẹju diẹ), lẹhinna tan-an ki o bẹrẹ igbimọ fifi koodu wa lati gbiyanju (wo awọn idi ti a ṣalaye loke)
  4. Tẹle iṣẹ atilẹba rẹ ti “tan kamẹra eto ati koodu koodu ni akoko kanna”. When the problem “we are unable to read the “mainStream”, “SubStream” nikan ni a le ka.” ti wa ni atunse, Maṣe tun bẹrẹ igbimọ fifi koodu nipasẹ oju-iwe wẹẹbu naa, ṣugbọn gbona-siwopu okun HDMI laarin kamẹra rẹ ati igbimọ fifi koodu. Mo ro pe o jẹ nikan kan gbona-siwopu isẹ (nitori Mo fura pe o jẹ iṣoro wiwa plug-in ti o fa kamẹra ko sopọ si igbimọ fifi koodu. Firanṣẹ HDMI ifihan agbara)

Fi esi kan silẹ

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *

Discover more from iVcan.com

Alabapin bayi lati tọju kika ati ni iraye si ibi ipamọ ni kikun.

Tesiwaju kika

Nilo Iranlọwọ lori WhatsApp?
Exit mobile version