150km 200km wireless data transmission telemetry transceiver Data Link
Our digital radio is mainly used for high-power long-distance industrial data transmission.
It has a small size, tuifio lelei, mo e ongoʻingofua maʻolunga.
Work in the 902~928MHz frequency band.
The transmission distances supported 100km and 200km, takitaha.
Fakahokohoko ʻo e Tohi
Ngaahi fotunga
Tu'o lahi kehekehe: 902-928MHz
Spread spectrum method: KFSS
Encryption ʻo e fakamatala: 256-bit physical layer encryption
Fetuʻutaki: up to 100km/200km
Output malohi: 10W (40dBm)
Air interface rate: hake ki he 276.4 kbps
Serial port baud rate: aʻu ki he 921.6 kbps
Hono fakalele 'a e mafana 'o e 'ea: -40°C to 85°C
Fakapapau'i e
Instructions for placing an order
Serial port is TTL or RS232
What baud rate needs to be set
'Enitena (receiver)
At the default package, te mau fekauʻi atu koe 2 pcs omnidirectional antenna for the transmitter and receiver. If your transmission range is over 100km, it is better to change a directional antenna to the ground receiver and try to install it as high as possible.
FAQS
- Support Pixhawk autopilot.
- Can send rand receiver the data, but no video, if need data+video, Kataki 'o vakai'i TX900
- The working frequency is from 902Mhz to 928Mhz.
- A small antenna in the air unit is omnidirectional, kau ai ʻa e.
- A big antenna in the ground unit, it is better to use a directional antenna, ʻikai fakakau.
- Our wireless data transmission supports multi-point-to-point networking, and one ground unit can control multiple drones.
- You should buy a new one and pair them.
- 'Io, it is full-duplex.
- We can customize the data port to RS232 if you need.
-
It doesn't matter if the serial port baud rate is changed to 115200, but the corresponding serial port baud rate of the flight controller must also be changed to 115200.
- ʻIo, you can also change the serial port baud rate to 57600. The biggest impact is that the flight control may increase the amount of data as the serial port baud rate increases. This is the only impact.
-
10-watts Power Amplifier model needs 24V power supply
Kei ʻi ai pē haʻo fehuʻi?
Kātaki ʻo fetuʻutaki mai kiate kimautolu ke maʻu ha fakamatala lahi ange.
ʻAve Hoʻo FehuʻíConfiguration Tool Software
Download 'a e https://drive.google.com/file/d/1ACNyk_xsgtlLXPBPTWp-qpyqPjGk8UQT/view?usp=drive_link
Tohi Lēsoni ʻa e Kau Fakaʻaonga
Users Manual online (HTML)
Users Manual online (PDF)