Transmitter TX ngaue encryption module receiver RX descrambling decryption module

Please don’t share FPV videos with stranger, it’s time to encrypt video！

Konga

• Lightweight design
• Pair use (one add at the FPV transmitter, another add at the video receiver)

Video Encryption Principle

We collect CVBS video and perform AD (analog-to-digital) conversion, encrypt the converted digital signal through FPGA, reprocess the video image, and then output it for DA (digital-to-analog) conversion, and convert it into a standard CVBS output to the transmitter.

Video Decryption Principle

We convert the CVBS video signal received by the receiver into AD (analog-to-digital), decrypt the converted digital signal through FPGA, reprocess the video image, and then output it for DA (digital-to-analog) conversion, and convert it into a standard CVBS output to the display.

Parameter settings

1: Open the configuration software, find the corresponding serial port number, select and open the serial port and click “lau” to read the current device parameters.

2: Fili “Scramble” pe “Descramble” mode and enter the required scramble or descramble sequence.

3: Press “Tohiʻi” to write data.

Hardware Connection

Scrambling pin define

Descrambling pin define

Tokoni fakatekinikale

Special case description: Due to the differences in the video amplitudes of cameras, vitio transmitters, and video receivers produced by different manufacturers, the video brightness may not be enough during use. If this happens, please follow the steps below to modify the module.

1. First remove the resistor on the “1” lakanga.

2.If the video amplitude is still not enough, remove the resistor on the “2” position and short it.

Fu'u mamafa

 

Please contact us for download this CVBS scrambling assistant software.