COFDM Mobile Video Wireless Transmission users manual for COFDM-908T and COFDM-912T
Users Manual for COFDM Mobile Video Wireless Transmission
This is a manual for COFDM-912T and COFDM-908T. If the HD input is mentioned in the text, it refers to the COFDM-908T model. If the SD input is mentioned in the text, it refers to the COFDM-912T model. Please Pay attention to the distinction.
สารบัญ
1. คุณสมบัติ
- อย่างบูรณาการ, การออกแบบโมดูล
- นำเทคโนโลยีการมอดูเลต COFDM มาใช้, เทคโนโลยีการเข้ารหัสภาพ H.264
- Can transmit one 1080P HDMI signal and one unidirectional data up to 230400Kbps
- latency ต่ำ, the minimum end-to-end latency is 350ms
- ทุกรอบการสื่อสาร, ไม่กลัวการสร้างกำแพง
- High-speed travel-to-travel communication,
- เคสอะลูมิเนียมชนิดระบายความร้อนของเครื่องส่ง, shockproof and impact resistant
- ที่ไม่ใช่สายของสายตา (NLOS) การส่งผ่านมือถือ, the transmission distance of 2W power is not less than 30 kilometers under the condition of no interference, the transmission distance of 5W power is not less than 50 กิโลเมตร, and the transmission distance of 10W power is not less than 80 กิโลเมตร
- ความเร็วในการเคลื่อนที่สูงสุดสามารถเข้าถึง 600Km / ชั่วโมง (วัด)
- การรับสัญญาณเสียงและวิดีโอแบบซิงโครนัส, ตัวเลือกหลายรูปแบบ HDMI1080P ความละเอียดสูง, คุณภาพของภาพ DVD เอาต์พุตความละเอียดมาตรฐาน
- เครื่องรับสามารถบันทึกวิดีโอและฟังก์ชั่นสำรองข้อมูลได้
- 128-การเข้ารหัสและถอดรหัส AES บิต
- Can provide full customization
2. ใบสมัคร
This product is mainly used in technical reconnaissance and evidence collection of public security and safety inspection departments, real-time picture transmission of drones and unmanned ships, radio and television broadcasting, broadcasting live broadcasting: ฟิลด์กระจายเสียง, กีฬากระจายเสียง, ข่าวสังคม、อากาศสด、สตูดิโอ, mountaineering expeditions and more. เหมาะสำหรับการส่งภาพคุณภาพสูงผ่านมือถือแบบเรียลไทม์ในสภาพแวดล้อมที่ซับซ้อนต่างๆเช่นในเขตเมือง, ทะเล, และภูเขา.
3: Parameter Indicators
1: เครื่องส่ง (only standardized pictures, except for customization)
Product parameters:
การปรับ | COFDM |
แรงดันไฟฟ้าปฏิบัติการ | DC11V~DC17V |
ปัจจุบันการทำงาน | 1W:≤1.3A DC12V,5W:≤2.5A DC12V,10W:≤5.2A DC12V, |
อินเทอร์เฟซการควบคุม | Standard RS232 interface, 8 บิตข้อมูล, 1 บิตหยุด, ความเท่าเทียมกันแม้, อัตราการส่งข้อมูล: 19200 |
อินเทอร์เฟซข้อมูลที่โปร่งใส | การส่งผ่านพอร์ตอนุกรมแบบโปร่งใสทางเดียว, 8 บิตข้อมูล, 1 บิตหยุด, สนับสนุนความเท่าเทียมกันแปลก, ความเท่าเทียมกันแม้, ความเท่าเทียมกันแบบไร้สาย, อัตราการส่งข้อมูล: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 、230400 |
การเข้ารหัสลับ | รองรับการเข้ารหัส 128 บิต |
การแมปการมอดูเลต | QPSK(4QAM)、16QAM、64QAM |
แก้ไขข้อผิดพลาดไปข้างหน้า | 1/2 2/3 3/4 5/6 7/8 |
ช่วงเวลายาม | 1/32 1/16 1/8 1/4 |
จำนวนของผู้ให้บริการ | 2k |
แบนด์วิดท์ความถี่ | 2/3/4/5/6/7/8M ปรับได้ |
กระแสการขนส่ง | 2000kbs ~ 20000kbs ปรับได้ |
ส่งกำลัง | 1W/5W/10W |
ความถี่ในการส่ง | Any frequency can be customized, the frequency is continuously adjustable, the adjustable range is ±20MHz, and the step is 1MHz |
ความเรียบพลังงาน | Less than 0.2dB in 10MHz band |
อัตราส่วนไหล่ | The shoulder-to-shoulder ratio is better than -28dB at full power output |
second harmonic | ≤-45dB |
MORE | 32เดซิเบล |
อินพุตวิดีโอ | 720×480 60ผม(NTSC), 720×576 50ผม(เพื่อน), 720 50P, 720 60P, 1080 50ผม, 1080 60ผม, 1080 24P, 1080 25P, 1080 30P, 1080 50P, โหมดต่างๆสามารถปรับได้. |
อินเทอร์เฟซ HD | HDMI |
รูปแบบการเข้ารหัสวิดีโอ | H.264 |
มาตรฐานการป้องกัน | ทั้งหมดอลูมิเนียมชนิดหม้อน้ำตัวถัง, ป้องกันการกัดกร่อน, การออกแบบที่ป้องกันการกระแทก |
ขนาดโดยรวม | 102*80*30mm(1w)/102*90*30mm(5W)/188*47*34mm(10W)/228*55*40mm(20W) |
Total Weight | ≤0.20KG (1W) / ≤0.27KG (5W) ≤1.5KG (10W) ≤2KG (20W) |
2: ผู้รับ
Product parameters:
Portable multi-bandwidth HD receiver parameters | |
รับช่วงความถี่ | 170-860เมกะเฮิร์ตซ์ VHF&UHF |
แบนด์วิดท์ความถี่ | 2/3/4/5/6/7/8เมกะเฮิรตซ์, ไม่จำเป็น |
ระดับอินพุต RF | -94dBm ~ -15dBm (ที่แบนด์วิดธ์ 8M)/-98dBm ~ -15dBm (at 2M bandwidth) |
ข้อมูลสมรรถภาพ RF | 50 โอห์ม |
ช่องเสียบ RF | หัวไม่มี |
วิธีการ demodulation | COFDM |
Constellation way | QPSK, 16QAM, 64QAM (ไม่จำเป็น) |
แก้ไขข้อผิดพลาดไปข้างหน้า | 1/2,2/3,3/4,5/6,7/8 (ไม่จำเป็น) |
จำนวนของผู้ให้บริการ | 2k, |
ช่วงเวลายาม | 1/32,1/16,1/8,1/4 (ไม่จำเป็น) |
ถอดรหัสวิดีโอ | MPEG-2MP@ML/H.264 |
screen aspect ratio | 4:3 16:9 |
Video output image | 720*576@8MHz 1080P@60P、50P、50ผม、30P、 |
โหมดเอาต์พุตเสียง | Stereo unbalanced 300/ 200mv |
สัญญาณเสียง | 2สัญญาณเสียง + 2เอาท์พุทวิดีโอ |
แรงดันไฟฟ้าปฏิบัติการ | AC220V/DC12V <0.4A |
อุณหภูมิในการทำงาน | -20℃ ~ + 50 ℃ |
physical dimension | 136*115*35mm non-standard all-aluminum shell |
น้ำหนักอุปกรณ์ | 0.35กิโลกรัม |
4: Instructions for use
1: เครื่องส่ง
- Functional area description
“มด”: Transmitting antenna interface, please connect the antenna before powering on
“HDMI”: High-definition video input interface, input below 1080/50P
“Ctrl”: Transmitter tuner connection interface
“DC 12V”: DC12V power input port. “+” is the positive pole of the power supply, “-” is the negative pole of the power supply
“กระแสตรง” คือ: ไฟแสดงสถานะเพาเวอร์, when the light is always on, it means that the power input of the transmitting module is normal
“TS”: Video input detection indicator light, this light is always on to indicate video input and normal encoding
- Parameter Configuration Description
Connect the transmitter parameter adjuster, press the “MENU/OK” key to enter the menu, the encryption key and data serial port parameters are displayed first, press the left or right key to move the cursor, and the up and down keys to adjust the parameters
After the parameter setting is completed, กด “MENU/OK” to enter the next menu, and the interface is displayed as shown in the figure
Press the left or right key to move the cursor, press the up or down key to adjust the required parameters, the interface prompts as shown in the figure
After all parameter settings are completed, press the “MENU/OK” key to confirm, and the display will be as shown in the figure.
After the setting is completed, the parameters are written successfully, and the display is as shown in the figure
- General Troubleshooting
ก: The light is off after the power is turned on: Check whether the power input meets the standard
ข: “TS” indicator light is off: Check the video input connection cable, check whether the video input format conforms, and check whether the camera is interfered with (you can judge by holding the antenna with your hand).
C: The temperature of the transmitter is very low: check whether the current is normal (the deviation can be ±0.2A within the standard current).
d: Three lights are always on, and one of them is super bright: it means that the transmitter has failed the detection, and you can try to power off and restart (uncommon)
2: ผู้รับ
- Functional area description
“RF in1” “RF in2”: receiving antenna interface, it is recommended to connect the antenna and then turn on the power switch, because the static electricity of the human body may cause the receiver to crash.
“HDMI”: อินเทอร์เฟซเอาต์พุตวิดีโอ, the output video format can be adjusted through the “HDMI” menu on the control panel.
“DC 12V”: อินเตอร์เฟซที่กำลังไฟฟ้า, please strictly follow the power supply voltage requirements, and overvoltage input is strictly prohibited
“เปิดปิด”: power switch.
“ยูเอสบี”: video storage interface, when the U disk is inserted, press the “EXIT” button to start the video recording, after the recording is successful, the video display will display the video recording time, and the stored file name is “TS”.
- LCD parameter description
ก:CH01 UNLOCKED(LCKED)
“CH01” means the channel number of the receiver, “UNLOCKED” means the received signal is unlocked, และ “LCKED” means the signal is locked. “CH00” of the receiver is the initial writing channel, and the default channel corresponding to the normal operation of the transmitter is “CH001”
ข: FREQ:602.0เมกะเฮิรตซ์
“602.0เมกะเฮิรตซ์” is the receiving frequency of the receiver, this frequency must be consistent with the frequency set by the transmitter, otherwise the receiver will not search or receive the signal from the transmitter
ค: BW:6.0เมกะเฮิรตซ์
“BW” แบนด์วิดธ์, as shown in the figure, “BW: เมกะเฮิรตซ์” is understood as the RF bandwidth is 6MHz, this bandwidth must be consistent with the bandwidth set by the transmitter, otherwise the receiver will search for or cannot receive the signal from the transmitter
d: FEC:1/2
“FEC: 1/2” is the channel error correction, this parameter synchronizes the parameters set by the transmitter, and the receiver cannot be modified
จ: GI:1/32
“GI:1/32” is the channel guard interval, this parameter is set by the transmitter synchronously, and the receiver cannot be modified
ฉ:MAP: QPSK
“MAP: QPSK” is the modulation mapping, this parameter number is set by the transmitter synchronously, and the receiver cannot be modified
ก.: SNR:0.0เดซิเบล(SNR:15.0เดซิเบล)
“SNR: 15.0เดซิเบล” is the signal quality (that is, the signal-to-noise ratio, the larger the value, ยิ่งดีเท่าไร). เมื่อไหร่ “0.0เดซิเบล” is displayed, the signal quality is 0, and the receiver will not be able to lock
“(SNR:15.0เดซิเบล)” means the receiving signal-to-noise ratio is greater than 15dB. In the “QPSK” modulation mapping state, as long as the signal-to-noise ratio is greater than 6dB, the receiver can lock
H: PW:-72.1dBm(PW:-72.1)
PW is the received signal strength, (reference level value), the farther the transceiver end is relative to the distance, the weaker the signal strength is, and the larger the displayed value is, when the transmitter is not turned on, if the signal strength of the receiver is greater than -90dBm (such as -79.7dBm), it can be considered as adjacent frequency interference
- Parameter Configuration Description
Power on the receiver, and press the “MENU/OK” button to enter the menu, the first display is the menu of adjustable parameters, if you search for a specified frequency, directly press the “MENU/OK” button to enter the menu; if you want to remove the channel, press Press down to select “ListanbulChannel”, and then press “MENU/OK” to enter the menu operation; if you need to change the video output format, move the cursor to the “HDMI Mode” เมนู, กด “MENU/OK” to enter, and select the video to be output After formatting, press the “MENU/OK” key to confirm.
The frequency search method is as follows. After entering the frequency setting menu, the interface is displayed as shown in the figure. Press the left or right key to move the cursor, press the up or down key to adjust the frequency, แบนด์วิดธ์ RF, and secret key that match the transmitter, and press the “MENU /OK” key to search. Note that the transmitter must be turned on at this time, มิฉะนั้น, the receiver will not be able to lock because it cannot find the signal.
COFDM Mobile Video Wireless Transmission with a cheap price is including a transmitter and receiver for China directly
When the search is completed, กด “MENU/OK” สินค้าของเรามี, and the channel is saved in the register of the assistant board, as shown in the figure. To save the channel to the receiver register, press the “MENU/OK” key and the right key at the same time.
After the receiver parameter setting is completed, the functions of the panel keys are as follows
"↑”“↓“: each individually selectable receiver channel “CH**”
"←”“→“: You can choose to view the hidden parameters of the receiver
“EXIT”: start and stop recording
- Video function
Insert the storage device into the “ยูเอสบี” interface of the receiver, press the “EXIT” button to start recording, and a blue recording time box will appear on the upper left corner of the video display as shown below
- General Troubleshooting
ก: The value after the receiver displays “-” is very low (Tx is not turned on): It means that the current channel has serious electromagnetic interference, and the normal value is -90- -100.
ข: Cannot record video: check the U disk or replace the U disk.
C: No signal received: Check whether the channel frequency is consistent with the transmitter.
d: No video output: Check the connection line, power off, and restart to check whether there is a boot interface.