Innehållsförteckning
COFDM Wireless video transmitter and receiver Dimension
2-watt PA COFDM Wireless Video Transmitter
Storlek: 90x65x22mm
The most recent advancements in COFDM (Kodad Ortogonal Frequency Division Multiplexing) wireless video transmitter and receiver technology have transformed how video is transmitted and received. COFDM is a modulation technique that allows digital data to be transmitted over a wide range of frequencies, resulting in a more reliable signal and improved data transmission.
We use COFDM technology in numerous applications, such as digital television, trådlös videoöverföring, och digital radio. It’s also found in military and aerospace applications like satellite communications and unmanned aerial vehicles.
Till sist, recent advancements in COFDM wireless video transmitter and receiver technology have transformed the way video is transmitted and received. This technology has enabled high-definition video transmission over wireless networks, as well as video transmission over a variety of networks and devices. The use of advanced coding techniques, such as forward error correction (FEC) and adaptive modulation, has enabled this.
5-watt PA COFDM Wireless Video Transmitter
5-Watt PA COFDM-912T Weight
Package for one full set of the COFDM Wireless Video Transmitter
FAQ of the COFDM Wireless Video Transmitter and Receiver
Hej, I am looking for a long-range hd video transmitter with hdmi input and a receiver with hdmi output.
Only transmit and receive in a surveillance center. The idea is to use the HDMI output of the remote control and retransmit it to the central. The drone has a system to transmit over the internet, but there is no internet in the desert, so we need to retransmit but not with the internet.
ok, our one-way long-range wireless video transmission solution is the base of COFDM technology (similar to DVB-T digital TV broadcasting). It is not on the base of the Internet.
Does this COFDM wireless video transmitter and receiver have AES 256 eller 128 kryptering? the output format is full hd?
Ja, COFDM-912T supports AES 128 kryptering. Please notify us to plus a Parameter Configuration board for setting the AES128 password when you are placing the order. It is optional to buy.
The COFDM-912T transmitter only supports SD720P Video input. So even if the receiver has HDMI output, it cannot output real 1080P high-definition video, only 720P.
If you have very high requirements on the definition of picture output, I suggest you choose a model that both the transmitter and receiver support 1080P, COFDM-908T
Can it reach 30 km around?
In the introduction of the wireless video transmission system, all the transmission distances mentioned are based on the visible range (DEN). The 2WPA power amplifier supports 30 kilometers and is usually used on drones. The altitude is very high and the receiver is on the ground, so there is an obvious height difference between the transmitter and the receiver, and the wireless signal is transmitted in accordance with the waveform. The signal loss is small and other interference is very little clutter.
You mentioned that your usage scenario is that both the transmitter and receiver are on the ground, especially in desert areas, and there may be rolling sand dunes. Därför, the signal transmitted wirelessly is easily interfered with. So here are the suggestions:
1. Try to use a high-power transmitter, som 10 Watt eller 20 Watt. Many of our ship customers use 20W transmitters.
2. Try to use a higher antenna or put the antenna on the roof or a nearby hill, and you can also increase the antenna tripod. Our clients always choose some 1.8-meter FRP omnidirectional fiberglass antennas.
3. If conditions permit, en repeater can also be added to enhance the signal strength and increase the transmission distance. The repeater can be fixed at a high place or on the roof of a moving car.
How to assemble the wireless video transmitter, kamera, and battery?
Kontrollera bilden nedan.
There are two power connectors at the transmitter, the red connector is 12V output for the camera, and the black connector is 12V input.
What is the lag or delay in milliseconds of your COFDM-912T?
200-300ms with a regular camera and monitor.
Normal camera and screen have a delay of 200 millisekunder, höger?
With our 100 millisekunder, it’s about 300 till 400.
We also have one with 30 millisekunder, but the price is 6 times that
300 milliseconds is acceptable if your plane has an automatic obstacle avoidance function.
I noted your transmitter can support up to 30 kilometers in LOS. How far will it support in the NLOS environment?
It’s hard to say the range of non-line-of-sight use, it depends on how many obstacles are in the middle. It is difficult to transmit if fully surrounded metal or mountains block it.
The test environment is unique, and the distance obtained from the test is also different. We can’t make any guarantees or promises about this.
We are a company that offers a solution to some rural areas here in the Philippines to monitor their rivers. If we purchased a 2W(30km) in the NLOS location, it could be reduced to 20km or more?
It is hard to say, it should depend on the obstacles between the transmitter and receiver. We don’t test it in your use environment, So I can’t tell you.
The same product will be interfered with differently in different environments, and the transmission distance is hard to say. Only the actual test will know.
Buyer: Actually, we have installed a radio transceiver that gathers a data sensor and transmits its data to an 18km distance center command. The operation is smooth and ok.
The same place we’re going to put up the device that we will buy from you.
As you have said, only an actual test will answer all of my questions.
Can the COFDM-912T TX device output separate serial data?
Data can only be transmitted in one direction from the transmitter to the receiver.
If you need to transmit data in both directions, you need to add a digital radio telemetry. (wireless data transceiver).
I would like to know if the transmitter can also output serial data on what the camera is capturing. Other than RF does it have a separate rs232 output for the transmitter?
Ja, COFDM-912T supports transferring the serial data for you. Kontrollera bilden nedan.
In this module where I can put up the camera? What type of camera is suited for this device?
The black one on the left shows a little bit of the above picture, which is connected to the camera.
It supports a 720p CVBS composite AV camera. or any HDMI camera by HDMI to AV converter box.
How can I let the transmission still work well if I remove the menu and panel board from the receiver?
Is there any way to disable the control panel so that the receiver can see the video from the transmitter?
If I remove the control panel on the receiver, the receiver does not see the signal from the transmitter.
Svar: Please check the FAQ in the below link.
https://ivcan.com/p/cofdm-video-transmitter-receiver-av-in-hdmi-out/#accordion-item-6._i_have_changed_the_parameter_on_the_configure_board_tool,_why_it_is_not_saving_when_i_restart?
I guess that you did not save the frequency, after you remove the menu on the receiver, the system will be back to the default frequency of 340Mhz. So you can not get the signal.
If GPS and TX are separated less than 1 meter – GPS is jammed. COFDM-912T has significant noise in GPS l1 and l2 freq. Do you have any low-pass filters to solve this problem?
Hej! We did extensive testing before ordering a bigger batch. And faced issues if combining the COFDM-912T transmitter with GPS.
Svar:
1. If you buy it again, I can add a low pass filter in the transmitter inside free. I can also provide an external low-pass filter for you for free.
2. “Do you know what insertion loss is in non-filtered frequency?”, Svar: max 0.6db
3. “Do you know what dBm loss is pass frequency?” 0.4dBm
COFDM-912T Customize Development
2 Watts default 595Mhz with 1.8-meter transmitter and receiver antenna
The client told us that his application details, the transmitter and receiver, are both used on the ground. In order to enhance the wireless transmission distance and avoid other signal interference, I recommend that both the transmitter and receiver antennas use 1.8-meter fiberglass antennas.
It was the first time the customer took the sample for testing, so he used the default two-watt amplifier and 595 MHz frequency.
The customer requires that the transmitter have an HDMI output so that he can transmit the received video to other devices. På samma gång, in order to support HDMI input, I also matched an HDMI to CVBS RCA AV converter box.
The customer has added an optional parameter adjustment tool, the main function of which is to modify the transmitter’s transmission frequency and impedance. You can also add a password to the wirelessly transmitted video to encrypt the video of the transmitter. We must enter the same password on the receiver to decode the video to improve the security of the video.
Change COFDM Transmitter to 200 mW PA, with a power switch of the cooling fan for body wear
Customize a video on-off switch on the COFDM Transmitter for audio-only wireless transfer.
Here is the test video for this client’s requirement, added a video on-off switch at the 10-watt PA wireless video transmitter to transfer the audio only.
Here is a video to show you that we can add one video on-off switch on the COFDM wireless video audio transmitter.
Video on, then the transmitter will transfer the video and audio at the same time.
Video off, then the transmitter will transfer the audio only.
If you have any project or need to customize the function of the wireless video transmitter and receiver, kontakta oss.
The default power amplifier is 2-watt, we also make a 10-watt PA inside, to support long-range and transfer more extended distances.
2 Watts default 595Mhz with Yagi Directional Antenna and Omnidirectional antenna
300 Watts power amplifier modified 230Mhz COFDM wireless video transmitter and receiver
Vanliga frågor
- Ja, frekvensområdet kan ändras från 170Mhz (bättre från 220Mhz) till 860Mhz. Så det kan fungera bra på 260Mhz-bandet.
- Frekvensen bör modifieras till samma på sändaren och mottagaren. Av orsak, effektförstärkaren och antennfrekvensen bör modifiera samma frekvens. (Du måste köpa en effektförstärkare och antenn för sändaren och mottagaren för att möta din ändrade frekvens).
- För att förbättra känsligheten för sändning och mottagning, frekvensbandbredden görs i allmänhet mycket smal (mittfrekvens ±15Mhz, så bandbredden bör vara 30Mhz). Sändarens effektförstärkare och antennens frekvens är speciellt anpassade efter den frekvens du behöver.
- Det är bäst när du gör en beställning, berätta för mig vilken typ av arbetsfrekvens du behöver. Våra ingenjörer kommer att ändra frekvensen på sändaren och mottagaren, och även modifiera PA och anpassad antenn enligt detta frekvensområde för att säkerställa bästa känslighet och stödja det längsta överföringsavståndet.
- Standardfrekvensen är 590Mhz, Med 30Mhz (+/-15Mhz), du kan ändra det utan att modifiera effektförstärkaren och antennen. Till exempel, 578Mhz, 584Mhz, 590Mhz, 596Mhz, och 602Mhz.
- Om du behöver ändra sändarens frekvens och bandbredd, du behöver ett specialverktyg för parameterkonfigurationskortet, se bilden nedan, det är inte ett standardtillbehör, vänligen köp den mot en extra kostnad eller kontakta oss innan du beställer.
Ja, det stöder att skicka video- och UART-data från sändaren och mottagaren.
Eftersom det är envägsöverföring, så den kan inte skicka kontrollkommandot från mottagaren till sändaren.
Om du behöver skicka kontrollkommandon eller annan data från mottagaren för att styra andra enheter såsom kameror eller drönare vid sändaren, du kan lägga till en uppsättning billig digital överföringsutrustning, kontakta oss, och vi kan skräddarsy det för dig.
Kontrollera UART-definitionen på sändaren och mottagaren på länken nedan. Säg till om du vill ha en blykabel. (standard är nej)
Sändarens standardeffektförstärkare är 2 Watt, så det kan stödja 30 KM vid siktlinje.
Bilden nedan är vårt testade avstånd från berget till havet.
Om du vill sända en längre räckvidd, du kan öka effektförstärkaren. Förutom en watt och två watt, vi kan också göra 5 watt, 10 watt, och 20 watt för ditt val. Större förstärkare kräver också större batterier och strömstöd.
För 20W PA, strömförsörjningen ska vara 24~28V. Endast vid 28 volt kan effektförstärkaren uppnå den bästa användbarheten.
Vår ingenjör kan ändra frekvensen till 300Mhz från standardvärdet 590Mhz, Antennen, och PA i lagret är 590Mhz, 300Mhz behöver två veckor för att anpassa sig, så leveranstiden behöver längre än våra standard 590Mhz.
Steg 1: Tryck på OK och höger knapp samtidigt, visas en meny om du vill spara på skärmen.
Steg 2: Tryck på OK för att välja Ja för att spara.
Påminna, använd den större eller längre antennen om ditt projekt tillåter, det kan få bättre mottagningsprestanda i det större området.
Standard full uppsättning
- SD-sändare ( PA 0,5W, 1W, 2W, 5W, 10W, 20W, 50W valfritt enligt din beställningsefterfrågan)
- SD-sändarantenn
- HDMI CVBS-utgångsmottagare med parameterkontrollmeny och liten skärm
- 0.8-mätare Mottagarantenn 1 st. (Det finns två typer av installation eller fixering av antennen: 1. magnetisk sugbasantenn, 2. Standard U-typ klämma FRP glasfiberantenn )
- Frivillig, parameterkonfigurationskort för den trådlösa videosändaren.
(Om du behöver en magnetisk sugbasantenn, expressen eller transportören tror att de magnetiska produkterna kommer att störa deras flygsäkerhet, så fraktkostnaden är högre än en klämantenn av U-typ. )
Standarddimensionen för full uppsättning paket
- 84*21*12CENTIMETER
- Bruttovikt 4,5 kg
- Om du väljer över 100cm antenn och magnetisk sugbasantenn, Vissa speditörer kommer att ta ut extra avgifter, som extra långa avgifter och extra avgifter för starka magnetiska föremål.
- Sändarens parameter konfigurerar kortet skiljer sig från den på mottagaren. Den fasta programvaran på parameterkonfigurationskortet skilde sig från sändaren och mottagaren, de kan inte användas omväxlande.
- Sändarens parameter konfigurerar kortet kan justera signaldämpningen på sändaren. Per 0,3db kommer att minska 0,5W PA.
Fråga: Är det möjligt att ändra uteffekten (intern PA 0,5 w, 1 w, 2 w) via konfigurationskortet?
- Som svarat ovan, du kan justera uteffekten genom att ställa in parametrarna för ATTEN genom verktyget för parameterkonfigurationskort på sändaren. (Det här verktyget inkluderar inte standardpaketet, du måste meddela att du vill ha detta verktyg när du beställer)
- Om du köper 2W PA, då kan du ställa in den på 0,5W, 1W, men kan inte ändra det till 5W.
- Vi kan också göra det till 5W, 10W, 20W, och 50W om du behöver stödja långdistans.
Nej.
Denna trådlösa videosändare stöder endast CVBS-kamera eller videoingång, annan typ av videokamera behöver en extra konverterbox.
Nej. Det är COFDM (DVB-T) teknologi.
Så COFDM-frekvensområdet är 170-860Mhz. Det kan stödja 477, 610, 675, 724, 816Mhz, men kan inte stödja 970, 1180, 1230 Mhz.
Vår speciella modellsändare kan stödja alla ovanstående intervall, men mottagaren måste använda nedkonverteringsblocket.
För att låta vårt trådlösa sändningssystem stödja ett bredare utbud och bättre signalstyrka, Vi ställer vanligtvis in driftsfrekvensen till en viss punkt (170~860Mhz), och dess räckvidd som stöds är endast plus eller minus 15Mhz. Till exempel, mittfrekvensen är 590Mhz, max stödfrekvensområde bör vara 575Mhz~605Mhz, PA och antennen är speciellt anpassade efter denna mittfrekvens.
How to add a low-pass filter chip to the transmitter?
Some customers reported that when the distance between our transmitter and the GPS antenna is less than one meter, the transmitter will interfere with the work of the GPS through the transmitting antenna.
GPS satellite signals are divided into L1 and L2, with frequencies of 1575.42MHZ and 1228MHZ respectively. Our transmitter frequency is 595Mhz by default. If we encounter this situation, we can consider adding a low-pass filter, which means frequencies below 600Mhz. Frequencies above 600 MHz can be suppressed to avoid interference with other emitting electronic products.
There are two ways to add a filter. One is to add a filter IC to the COFDM-912T transmitter board, and the other is to add a filter box outside the transmitter. The down-pass filter can suppress frequencies below a certain frequency point, and the wave-pass filter can suppress the frequencies below a certain frequency point by allowing them to pass through.