Lilliput GK7000 firmware kudzoreredza iyo fekitori default kana ikapotsa, Emergency solution software download
Lilliput GK-7000 show error
If your Lilliput GK7000 devices show the above picture of startup wrong, please try to download the factory restore firmware.
Lilliput GK7000 upgrade steps
- Please download the upgrade firmware from the below link. https://drive.google.com/file/d/1GYmpZkDTz4LpFseNKdakgU7Vk8ZEfHSy/view?usp=sharing
- Prepare a one-piece Kingston 4G SD or 8G SD card, isa faira"NK.bin” kopi kune SD kadhi. chitsamba: Ndapota usavheneke mafaira asina hukama neGK-7000, kana zvisina kudaro ichakuvadza monitor.
- Isa "nk.bin" SD kadhi muGK7000 slot, to give the power to GK7000. As shown in the below image, show you the upgrading progress bar. Please wait until 100%.
- Kana yapera, iyo yekutarisa ichapinda otomatiki system. Wobva wabvisa SD kadhi.
- Upgrade OK and you will see that it is ok now.
GK-7000 Upgrade firmware download
| GK-7000 | firmware kudzoreredza iyo fekitori default |  |
How to get the printing information?
The most important step in troubleshooting is to turn on the power to obtain the RS232 serial port printing information. Then send the printed information to us for analysis.
How to operate and steps guide?
1. marongero
- Download the GK-7000 serial port tool.
- Copy the file named DNW.exe on the PC, then open this file;
- Chekutanga, click “Configuration → Options” on the menu and enter the settings window.
- Zvadaro, set the COM port number (the COM port number will be decided by the COM port that RS232 connects to the PC), Baud Rate: 115200. Download Address: 0x32000000;
- Pakupedzisira, Click “OK” to exit this setting window.
2. Click the “Serial Port → Connect” on the menu to open the COM port.
3. Keep pressing the “ESC” key on the keyboard, panguva imwe, power on the
PC745/GK7000, then the DNW window will print the related information shown below.
Finish!
FAQ
Q1: What should I do if we downloaded and upgraded your firmware, but did not solve the problem?
A1: Please give us the serial number of every defective unit, our engineer will check the hardware and firmware version of your existing one. We will offer you the relatively upgraded firmware.
7 padiki Yakaputirwa PC Nhare Dhata Inoteedzera MDT Kubata skrini pani GK-7000
GK-7000
7 Inch Yakadzika PC, uchishandisa yeindasitiri-giredhi yakadzamidzirwa chikuva, iyo GK7000 system yakagadzikana, yakavimbika workhorse ine hupfumi nzvimbo dzinosanganisira USB, WiFi, GPS yekufambisa, kukanganisa kuona, vhidhiyo kutora, uye nezvimwe mabasa. Iyo inowedzerwa zvizere uye inogona kupa vashandisi ine ine simba mota-yakakwira nharembozha multimedia ruzivo masystem.
init inogona kushandiswa zvakanyanya muvaraidzo wega, emergency emergency, kuronga kutakura, nharembozha hofisi, multimedia kushambadzira, maindasitiri kutonga, nedzimwe nzvimbo.
Zviri Mukati
Specification
| Ratidza Screen | 7″ Akatungamirira backlit |
| Resolution | 800× 480 (1,152,000 pixels) |
| Bata Panel | 4-waya resistive |
| kupenya | 300CD / ㎡ |
| Kuonekwa Ratio | 16:9 |
| THE | Windows CE 6.0, |
| CPU | 400MHz processor |
| ndangariro | 512MB Flash ROM + 128 MB DDR2 RAM |
| Kuwedzera Kuchengetera | Kadhi re SD / USB Flash Memory Kadhi re SD rinotsigira kusvika ku8G (zvemukati & zvekunze) |
| Transfer Interface | 10 / 100M Ethernet inotsigira USB1.1 × 3, Mini USB 2.0 × 1 (inoshanda sync) RS232 × 1 / RS485 × 1 kana RS232 × 2 |
| mutauri | 1W |
| Power kunwa | 8W |
| kushanda Temperature | -10 – 65ºC |
| Storage Temperature | -25 – 80ºC |
| Magetsi | DC 12V (Opsioneel: 9-24V) |
| divi(LWD) | 200 × 151 × 50 mamirimita |
| uremu | 516d / 610d (nebhatiri) |
| kuratidza | |
| Kuonekwa Ratio | 16:9 |
| Ratidza Screen | 7″ Akatungamirira-backlit |
| Resolution | 800× 480 (1,152,000 pixels) |
| Bata Panel | 4-waya resistive |
| Panel PC Rondedzero | |
| Operating System | Windows CE |
| Processor | Samsung S3C2416 400Mhz |
| RAM Ndangariro | 2GB Flash ROM + 128MB DDR2 RAM |
| Kuchengetedza Kwemukati | Kadhi re SD / USB Flash Memory – Kadhi re SD rinotsigira kusvika ku8G (zvemukati & zvekunze) |
| inowanikwa | |
| Cheap car insurance uye Jacks | 10 / 100M Ethernet inotsigira USB Inobata 1.1 × 1, Mini USB Mudziyo 2.0 × 1 (inoshanda sync), RS232 × 1 / RS485 × 1 kana RS232 × 2, |
| Kazhinji Parameter | |
| divi | (L) 200 × (W) 151 × (D) 50 mamirimita |
| Storage Temperature (° c) | -25 – 80ºC |
| kushanda Temperature (° c) | -10 – 65ºC |
| simba | |
| Power kunwa | DC 9-36V / 8W |
15pcs Package Gross Weight:22KG
15pcs Package Dimension:
Carton No 1:10PCS,51*34*40CM 7.6KG
Carton No 2:5PCS,25*40*38CM 13.87KG
FAQ
mubvunzo: What should I do if my GK-7000 has a problem?
mhinduro: Please check the troubleshooting here first. https://ivcan.com/lilliput-gk7000-firmware-recovery-the-factory-default/
Lilliput GK-7000 Red light On board and yellow light on power button and no diplay show what is problm in this situation
Troubleshooting method: Please power on to obtain the RS232 serial port printing information. Send the information to us, thank you. We use the information to troubleshoot problems. Pamusoro pe, please take a video for us to see, so that we can better troubleshoot the problem.
https://ivcan.com/lilliput-gk7000-firmware-recovery-the-factory-default/#How_to_get_the_printing_information