150km 200km wireless data transmission telemetry transceiver Data Link
Our digital radio is mainly used for high-power long-distance industrial data transmission.
It has a small size, good integration, and high sensitivity.
Work in the 902~928MHz frequency band.
The transmission distances supported 100km and 200km, resp.
Obsah
Vlastnosti
Frekvenčný rozsah: 902-928MHz
Spread spectrum method: Tento model bol navrhnutý na bezdrôtový prenos videa a dát s obojsmerným bezdrôtovým dátovým spojením
Data encryption: 256-bit physical layer encryption
Communication range: up to 100km/200km
Výstupný výkon: 10W (40dBm)
Air interface rate: up to 276.4kbps
Serial port baud rate: up to 921.6kbps
Prevádzková teplota: -40°C to 85°C
špecifikácia
Instructions for placing an order
Serial port is TTL or RS232
What baud rate needs to be set
prijímač Anténa
At the default package, pošleme vám 2 pcs omnidirectional antenna for the transmitter and receiver. If your transmission range is over 100km, it is better to change a directional antenna to the ground receiver and try to install it as high as possible.
často kladené otázky
- Support Pixhawk autopilot.
- Can send rand receiver the data, but no video, if need data+video, prosím skontroluj TX900
- The working frequency is from 902Mhz to 928Mhz.
- A small antenna in the air unit is omnidirectional, počítajúc do toho.
- A big antenna in the ground unit, it is better to use a directional antenna, nezahrňuje.
- Our wireless data transmission supports multi-point-to-point networking, and one ground unit can control multiple drones.
- You should buy a new one and pair them.
- Áno, it is full-duplex.
- We can customize the data port to RS232 if you need.
-
It doesn't matter if the serial port baud rate is changed to 115200, but the corresponding serial port baud rate of the flight controller must also be changed to 115200.
- Samozrejme, you can also change the serial port baud rate to 57600. The biggest impact is that the flight control may increase the amount of data as the serial port baud rate increases. This is the only impact.
-
10-watts Power Amplifier model needs 24V power supply
Configuration Tool Software
Stiahnuť ▼ https://drive.google.com/file/d/1ACNyk_xsgtlLXPBPTWp-qpyqPjGk8UQT/view?usp=drive_link
Užívateľská príručka
Users Manual online (HTML)
Users Manual online (PDF)