COFDM IP wireless data transmitter module
COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port Vcan1816
- Common cofdm transmitters are video signal inputs such as HDMI, CVBS, SDI, or AHD. This one is a transparent transmission module that can support IP cameras and support video and data through cofdm.
- Paired with this COFDM network video data transmitter is a COFDM receiving module, which can realize HDMI and CVBS output, and can also output video to a computer, RTSP, or UDP player through an IP network port RJ45.
- The key role is to use UDP broadcast/multicast to send data.
- vytvorenie jednosmerného bezdrôtového prenosového sieťového portu prenosové spojenie Vysielací modul prijíma dáta cez sieťový port a prenáša dáta prijaté sieťovým portom vo forme COFDM po prijatí dát + receive the module, vytvorenie jednosmerného bezdrôtového prenosového sieťového portu prenosové spojenie Vysielací modul prijíma dáta cez sieťový port a prenáša dáta prijaté sieťovým portom vo forme COFDM po prijatí dát
- Vysielací modul prijíma dáta cez sieťový port a prenáša dáta prijaté sieťovým portom vo forme COFDM
- Vysielací modul prijíma dáta cez sieťový port a prenáša dáta prijaté sieťovým portom vo forme COFDM, Vysielací modul prijíma dáta cez sieťový port a prenáša dáta prijaté sieťovým portom vo forme COFDM
Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3:
Obsah
Vlastnosti
- Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3, Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3.
- Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3: sieťový port, Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3. Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3: Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3
- CFG-UART: Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3, 4Jednosmerný COFDM ethernet PI bezdrôtový transparentný prenosový modul vysielača sieťový port3, can be docked to our parameter configuration panel. SconB alebo SconC, bezdrôtová pásma, SconB alebo SconC (SconB alebo SconC, SconB alebo SconC, režim konštelácie, SconB alebo SconC, atď.) SconB alebo SconC.
- SconB alebo SconC (Tx): SconB alebo SconC.
- interface TF kariet, upgrade softvéru, SconB alebo SconC.
- príkon interface (Moc): 2PIN 2.0mm pitch Phoenix terminal. napájacie napätie: 7V ~ 24V.
- SconB alebo SconC: SconB alebo SconC, a dáta blikajú, keď sa dáta zvyčajne prenášajú.
- LED indikátor napájania: Indikátor príkonu, SconB alebo SconC.
- SconB alebo SconC: 73SconB alebo SconC (s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky), s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky.
- s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky:
- s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky: 1/2, 2/3, 3/4, 5/6, 7/8
- s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky: QPSK / QAM16 / QAM64
- režim IFFT: 2K
- s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky: 1/4, 1/8, 1/16, 1/32
- Bezdrôtová šírka pásma: 1 s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky, 1KHz krok
- s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky: -94s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky (s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky, s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky).
- s výnimkou veľkosti zariadení rozhrania a konektorov vyčnievajúcich z okraja dosky: medzi 200 MHz ~ a 2300 MHz je možné ľubovoľne konfigurovať
Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM
Rýchlosť bezdrôtového prenosu (Rýchlosť rozhrania vzduchu):
rýchlosť(Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM) Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM (Bandwidth(MHz) * 8.0/7.0) / (1+GI) * 1512/2048*Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM(Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM) * Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM * 188/204.
Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM, Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM, Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM, Výpočet prenosovej rýchlosti bezdrôtového prenosového systému COFDM:
UART AT Command
ATDR、ATSD、ATSG、ATSM、ATGD、ATSR、ATGR、ATGB is useful
For the UART AT command operation and format, prosím skontrolujte nižšie uvedený odkaz.
Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command
Receiver Module
Suggestions
- This is a one-way unidirectional transmission system. if you need a two-way bidirectional transmission system, please check this link. https://ivcan.com/t/two-ways/ or https://ivcan.com/ru/p/mini-cofdm-wireless-ethernet-transmission-module-rj45/
- This is only a data transmission system, if you need video+data transmission, please look details of these modules, https://ivcan.com/p/modulator-demodulator-module-encoder-decoder-hdmi-cvbs/
- If you need a relay (opakovač) to support a longer transmission range (distances), please choose stronger PA (Výkonový zosilňovač) vo vnútri, napríklad, change 1Watts PA to 2.5 Watt alebo 5 Watty.
–160MHz~860MHz HD video COFDM receiver module with HDMI/AV/Ethernet/USB output
The COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, vhodné na použitie v aplikáciách s kvapalinou a vysokou pohyblivosťou. The receiver module accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. The receiver module can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver module features a range of comprehensive signal outputs including HD at 720p and 1080P, down-konvertované HD CVBS video monitora, and two analog audios supported.
The receiver module also includes DVR record functionality with a Micro SD card or USB disk. Okrem toho, the receiver module has a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like smartphones or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.
When paired with the Our COFDM transmitter module, the receiver module offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.
- COFDM demodulation and H.264 video decoder;
- Full HD resolution, 1080P@60fps;
- Great security by AES decryption;
- DVR record with Micro SD card or USB disk;
- Built-in RTSP server enables video streaming over Ethernet;
- Enables video streaming over a USB host for the remote device;
- Supports display characters string on the video display screen in OSD mode;
- Stable signal transfer in NLOS and high-speed moving;
- Adjustable working frequency, and bandwidth.
špecifikácia:
IO
HD video output | HDMI type A connector |
Composite video output | 6PIN PH2.0mm connector |
výstup zvuku | Embedded HDMI and CVBS |
RF vstup | Two SMA female 50Ω |
Napájanie | 2PIN PH2.54mm connector |
USB Host | 4PIN PH2.0mm connector |
TTL UART data | 3Konektor PIN PH1,25 mm, 3.3V signal |
TTL UART control | 4Konektor PIN PH1,25 mm, 3.3V signal |
Ethernet | 6PIN PH2.0mm connector |
TF-Card | TF-Card slot |
klávesy&LEDs | 2*5PIN PH2.0mm connector |
demodulovanie
Demodulation Formats | COFDM(DVB-T) |
Carriers | 2K |
Bandwidth | Configurable from 1MHz to 8MHz, step by 1KHz |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
ochranný interval | 1/32, 1/16, 1/8, 1/4 |
súhvezdí | QPSK, 16QAM, 64QAM |
Bitrates | 0.5Mbps to 31.67Mbps |
RF
frekvenčných pásmach | 160MHz ~ 860MHz |
Tuning Step size | 1KHz |
citlivosť | -97±1dBm(BW=8MHz, QPSK, CR=2/3, GI=1/16) for one channel and add 3dBm for two channel |
Video and Audio
video výstup | HDMI and CVBS, Ethernet(RTSP protocol by default, option UDP), USB |
video formátov | 1080P or 720P
720*480 60ja(NTSC), 720*576 50ja(PAL) |
Dekódovanie videa | MPEG-4/H.264 AVC |
výstup zvuku | Embedded HDMI and AV audio |
Dekódovanie zvuku | AAC |
Decryption | AES256 |
skladovanie | USB disk or micro SD card |
Monitoring and control
Comprehensive receiver setup with Our Config Panel or Windows PC or other devices via control UART.
teplotný rozsah
Full specification: 0° to +70°C Ambient
skladovanie: –40° to +80°C
Fyzicka charakteristika
Board Dimensions: 80.4*50.8mm
Power requirements
Vstupný rozsah: 9~24 V DC
Spotreba energie: <300mA@12V
IO Signals
klávesy + LEDs:
The receiver module has a 2*5PIN PH2.0mm connector which provides “keys + LEDs” signals. It is designed for customers who want to expand LEDs and keys to their cases.
PWR led signal: this two-pin can connect to an led for the power indicator, and constant light when the device is normally powered.
The link led signal: this two-pin can connect to an led for a wireless link indicator, which blinks when the video stream is received.
REC led signal: this two-pin can connect to an led for a record indicator, and constant light when video recording.
REC key signal: this two-pin can connect to a button for the switch of video recording, and a short press to change its status. The receiver will automatically check the storage device(micro SD card or USB disk) after powering on and start to record video when the storage device is inserted. Just press it to stop or record again.
OSD key: this two-pin can connect to a button for turning on/off the status of the OSD displaying, long press it to switch(more than 1s). The status will be kept after a reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:
RF:338.0MHz BW:4.0MHz ; RF, pracovná frekvencia; BW, Šírka pásma
QPSK CR:2/3 GI:1/16 ; súhvezdí, FEC, ochranný interval
AIR:3.90Mbps ; AIR, wireless transmitting bitrates
VBR:3.05Mbps AES OFF ; VBR, video bitrates; AES OFF, AES encryption turned off.
SIG1:27 SIG2:22 ; SIG1, the signal intensity of antenna 1; SIG2, the signal intensity of antenna 2
Ber1:0.14% ber2:100.00% ; Ber1, bit error rate of antenna 1; ber2, bit error rate of antenna 2
REC OFF č Storage ; video recording status
Paired with COFDM transmitter:
The default normal features of the two-antenna Wireless receiver module can be paired with all of Our H.264 transmitter modules. The HD video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 200~250ms.
Our two-antenna COFDM Wireless Receiver module can also be paired with our COFDM transmitter module for the lowest video latency application when manufactured with specified firmware. The specified firmware enables proprietary H.264 video compression/decompression only using p-frames for the lowest latency. The video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 50ms to 130ms.
How to test COFDM IP wireless video data transmitter module?
ethernet modem in one way
často kladené otázky
Please note that this network transparent transmission device is one-way transmission, it can only realize UDP broadcast function, although there is an RJ45 network port, but because it is not two-way transmission, it cannot realize the ping command, so even if you want to connect an IP camera, you need special customization IP cameras, because ordinary IP cameras need two-way transmission equipment.
How to test this network transparent transmission device, prosím skontrolujte nižšie uvedený odkaz
How to test COFDM IP wireless video data transmitter module
žiadny, just net transfer via IP ethernet RJ45 input.
- If you want to test the video transfer, maybe you need an encoder board Vcan1746, transfer HDMI / CVBS video to IP stream, then connect the 1816 vysielač.
- otázka: I already have Vcan1776, which has a Vcan1746 encoder board at the transmitter module, should I get one more encoder board?
- odpoveď: Although the encoder board of Vcan1776 can be reused. It needs to disassemble the Vcan1776 RF module, then connect the network port adapter cable, and change the different firmware. It is not recommended to do this. It is recommended that you purchase another separate encoder board.
- The voltage range of TX RX is 7~24V.
- At 12V power supply, use an adapter with a maximum of 1A or more.
- Prepare a formattedFAT32format Micro SD card
- Unzip the upgrade file from our verify and send to you, Here is "1816_update_image_xx_yy.zip" súbor, and copy it to the root directory of the Micro SD card, pay attention to keep the directory structure unchanged (there is a flash folder in the root directory of the Micro SD card, and there is an app folder in it).
- Insert the Micro SD card into the Vcan1816 module, power on and wait for the red light on the board to flash, indicating that the upgrade is successful.
- Poznámka:
Under normal circumstances, the update will be completed within 30s after power-on (the red light flashes). If the red light does not flash for a long time after power-on, please check the connection of Micro SD and try power-on again.