4K Плата декодера видеокодера HDMI HDMI-Ethernet и Ethernet-HDMI RTSP UDP

Feature

• Low Latency Video Encoder/Decoder: Supports H.265/H.264 encoding and decoding with full HD resolution, up to 3840x2160P at 30 frames per second.
• Аудиокодек: Includes audio input and output capabilities.
• Video Encoding Functionality:
  • Вход: HDMI
  • Выход: Streams via Ethernet using RTSP/TS protocols
  • Поддерживаемые протоколы: TCP and UDP
• Video Decoding Functionality:
  • Вход: Streams via Ethernet using RTSP/TS protocols (TCP and UDP)
  • Выход: HDMI
• Management Interface: Accessible via a web UI or UART.
• Pairing Capability: The one 4K encoder can be paired with another 4K decoder for low latency operation, achieving approximately 100ms latency for 1080P60 H.265 video.

Введение

Specification

ИО

Видео и аудио

Мониторинг и контроль

Comprehensive setup via web UI or AT command via control UART.

Диапазон температур

Полная спецификация: 0° до +70°C Окружающая среда (Необязательный: -40° до +85°С )

Хранилище:от –40° до +85°С

Физические характеристики

Dimensions: 80*50mm(не включая разъемы вне платы)

Weight: 27g

Требования к питанию

Диапазон ввода: 7~30 В постоянного тока

Потребляемая мощность: <250мА при 12 В

Сигналы ввода/вывода

The power input interface is a 2PIN PH2.0mm connector. The module board also provides a 5V power output for fan that it may be required when the module is integrated with wireless modules.

Данные UART

The 4K module supports one channel uart data packed with the stream and transmitted via the Ethernet. When 4K encoder works paired with 4K decoder and Ethernet linker (беспроводной или проводной), the data to this uart will be transferred to the remote 4K uart.

Управление UART

4PIN-разъем PH1,25 мм, ТТЛ 3,3 В. The 4K board system can be set-up via this control uart with AT command.

Audio in and Audio out

3PIN-разъем PH1,25 мм. When 4K encoder board works paired with 4K decoder board and Ethernet linker (беспроводной или проводной), it supports bidirectional voice communication. The analog audio input can be line in or Mic in, the analog audio out is designed to output to earphone or audio amplifier.

Ethernet1 and Ethernet2

Two 4PIN PH1.25mm connector, 100М Ethernet-порт.

When the 4K board is shipped as an independent encoding or decoding board, Ethernet1 and Ethernet2 are internally set to bridge, with the same IP addresses for both network ports. The input or output of video data is through the Ethernet1 interface, and Web UI access is through the Ethernet2 interface; Ethernet1 supports connecting with our bidirectional wireless transmission modules or other third-party bidirectional linkers. Ethernet1 supports UDP TS stream, RTSP stream and UDP TS stream + RTSP-поток.

When using the 4K board with our COFDM wireless transmitter modulator module (connected through FPC-Main interface via flat cable), Ethernet1 and Ethernet2 are internally set as two independent network ports, with different IP addresses.For this application, the Ethernet1 interface cannot be used externally because network signals are multiplexed to the FPC-Main interface.The Ethernet2 interface can be used as an access network port for the Web UI, or can connect to the IP camera through the Ethernet2 network port. The IP camera video signal can be transmitted through the COFDM wireless module modulator. The below picture shows 4K module connecting with our COFDM transmitter modulator module.

4К& COFDM transmitter modulator module

LEDs and GPIO

There are three signal indicator lights (LED1/LED2/LED3) on the right side of the 4K module board, and the indicator light signals are simultaneously connected to the J6011 connector PINs (4PIN 1.25mm connector). Some customers may need to assemble indicator LEDs on their housing case, then they can use J6011 connector PINs to add indicator LEDs on their housing case.

When the 4K works as an encoding board, the corresponding signals of the indicator lights are as follows:

When the 4K works as a decoding board, the corresponding signals of the indicator lights are as follows:

When using J6011 PIN signal to connect LED indicator lights externally, тот “positive pin” of the external LED2 and LED3 indicator lights should be connected to the corresponding J6011 PIN, и “negative pin” should be connected to any GND on the 4K board; When connecting the external LED1 power indicator light, connect the “positive pin” to the J6011 LED1-PIN and the “negative pin” to any GND on the 4K board.

GPIO signal on J6011 connector: reserved GPIO for using as special customized software.

FAQ

1 квартал: Does it support CVBS analog video input?
А1: No, only HDMI video input.

Q2: Can you offer me with a metal box?
А2: Конечно, Пожалуйста, проверьте фотографии ниже.

вопрос: What is the difference between the 4K decoder board I purchased and the other 4K + CVBS decoder board (модель 2227)?
A: Our engineer would like to remind you that the 4K board you purchased supports both encoding and decoding. Однако, when used as a decoder, it only supports up to 4K at 30 ФПС.

Если вам требуется 4K at 60 ФПС, we recommend the alternative модель 2227 board. This board:

• Поддерживает 4К 60 ФПС декодирование
• Is slightly larger in size
• Поддерживает Видеовыход CVBS
• Is offered at the same price

Приложения

1. Real-Time Aerial Video Streaming

The board can be used for потоковое видео в реальном времени from drones to ground control stations, providing high-quality 4K video feeds for surveillance, картографирование, и осмотр. Its low-latency encoding and decoding capabilities make it ideal for live broadcast scenarios, where high-quality, real-time video is crucial for decision-making.

2. Aerial Surveillance & Мониторинг

Drones equipped with the 4K HDMI encoder can be used for воздушное наблюдение, capturing 4K video from high altitudes and transmitting it over Ethernet or wireless links. This is particularly useful for общественная безопасность, военная разведка, или environmental monitoring. The ability to stream video in HD or 4K resolution ensures clarity for critical operations.

3. Drones for Search & Спасательные операции

В поисково-спасательные операции, drones need to transmit live video feeds to ground crews to locate missing persons or assess disaster zones. The encoder-decoder module allows for seamless HD/4K video transmission, даже в сложных условиях, helping rescue teams get crucial, real-time visual information from the drone.

4. Inspection of Infrastructure and Critical Assets

Drones are increasingly being used for inspecting infrastructure such as power lines, bridges, and oil pipelines. The encoder module allows for high-definition video recording and streaming to ground systems, позволяющий remote inspections and reducing the need for manual inspections in dangerous or hard-to-reach areas.

5. Broadcasting and Live Streaming from UAVs

The board’s capability to stream high-definition video with низкая задержка makes it perfect for прямая трансляция приложения, такой как спортивные мероприятия, aerial cinematography, или drone racing. The ability to handle real-time, high-quality video streaming is essential for professional-grade broadcasts.

6. Integrated with COFDM for Wireless Communication

When paired with a COFDM (Кодированное мультиплексирование с ортогональным частотным разделением) модуль, this encoder-decoder system is perfect for creating a дальнобойный, wireless communication link between drones and ground stations. This integration allows for reliable, high-quality video transmission even in вне прямой видимости (NLOS) окружающая среда.

7. Remote Control and Telemetry Data Transmission

The module can transmit not only video data but also telemetry data (через UART) over the same Ethernet link. This is essential for дистанционное управление of UAVs and monitoring flight parameters (e.g., высота, скорость, срок службы батареи) в режиме реального времени.

8. Military and Defense Applications

In military settings, UAVs are used for intelligence gathering, разведка, и наблюдение. The encoder-decoder board ensures the secure and efficient transmission of HD/4K video streams to ground units, offering strategic advantages during operations in areas with poor or unstable connectivity.

9. Сельскохозяйственные дроны

Drones used in precision agriculture can benefit from high-definition video streaming for мониторинг урожая и field inspections. The encoder module allows for the transmission of detailed video, helping agricultural experts monitor large areas efficiently and make timely decisions based on visual data.

10. Training and Simulation

В drone training and simulation окружающая среда, the board enables the real-time transmission of live drone footage to instructors and students. This makes it easier to provide training sessions и simulate real-life scenarios that require visual observation and tactical decision-making.

Параметры настройки

1. Video Resolution and Frame Rate:
   • The board supports 4K (3840x2160P) resolution at 30 fps and can be configured for other resolutions such as 1080P60, 1080P50, and 720P60. You can select the resolution and frame rate based on the specific needs of your project.
2. Custom Firmware:
   • The module can be equipped with optional firmware to support additional features such as split-screen mode for displaying up to four 1080P video channels. You can also request modifications to the firmware to suit unique application requirements.
3. Параметры аудио:
   • The board supports both HDMI embedded audio and analog audio input/output, which can be configured for your specific system. You can also choose different audio codecs such as AAC (16кусочек, mono, 48Кбит/с) to meet your needs.
4. Control Interface Customization:
   • The management interface can be customized either via a web UI or a UART control interface. You can request custom control protocols or configurations for better integration with your existing system.
5. Network Protocol Customization:
   • The board supports multiple Ethernet streaming protocols, including UDP TS stream, RTSP-поток, and a combined UDP TS + RTSP-поток. Depending on your network infrastructure, you can adjust the protocol settings to suit your environment.
6. Physical Enclosure:
   • The module can be delivered with a customized metal box or housing, providing additional protection and mounting options. The box can also include customized connectors or slots for easy integration into your system.
7. GPIO and LED Indicators:
   • The GPIO signal and the LED indicators can be customized for specific signaling needs. Например, you can integrate external LED indicators or customize the control signals via the J6011 connector.
8. Power Input/Output:
   • The power input can be customized to suit your device’s power requirements, ranging from 7V to 30V DC. Кроме того, the module offers a 5V power output for use with cooling fans or other components in integrated systems.
9. Температурный диапазон:
   • The module comes with standard temperature specifications (0° to +70°C), but for demanding environments, it can be customized to handle a wider temperature range from -40° to +85°C.

This board can be tailored in a variety of ways to fit your specific video streaming, encoding/decoding, and networking needs. Let me know if you need any further details or specific configurations!

FPV Weak CVBS to Ethernet

CVBS в IP Ethernet

HDMI + CVBS в IP Ethernet

SDI + AHD / CVBS в IP Ethernet

USB-камера UVC с IP-Ethernet

USB UVC camera to CVBS PAL NTSC

HDMI-IP-Ethernet

4K HDMI — IP Ethernet

Analog AV to IP Ethernet

IP Ethernet — HDMI CVBS

IP Ethernet — HDMI CVBS

IP Ethernet к HDMI

IP Ethernet к HDMI