Filtr

Wireless Data Transceiver Smart Data Radio TRX Transmission Module

Bezprzewodowy nadajnik-odbiornik danych Smart Data Radio / Moduł transmisji TRX

Kategoria: Bezprzewodowa transmisja danych

Opis
Wyślij zapytanie

Wireless Data Transceiver Module

Bezprzewodowy nadajnik-odbiornik danych Smart Data Radio / TRX TRM Transmission Module

Spis treści

Częstotliwość wsparcia

130-174Mhz, 220-240Mhz, 330-512Mhz, 800-960Mhz,
TRM/TRS/TRA400 410-470Mhz
TRM/TRS/TRA230 220-240Mhz

Waga: Board: Około (135sol,2W)
Enclosed: APProx (821sol,2W)
Enclosed: Około (1000sol,25W)
Board Size: 11.4 cm W x 1.9 cm H x 9.7 cm D (2W)
8.3 cm W x 1.3 cm H x 4.8 cm D (2W)
Enclosed Size: 16.9 cm W x 3.4 cm H x 11 cm D (2W)
18.4 cm W x 5cm H x 14.3 cm D (25W)
Enclosed Type: Aluminium

cechy

High performance and quality in a cost-effective data transceiver
FCC and IC 400 MHz ETSI 400 MHz (4800 bps)
IDH99FJ0 SRRC 138 200MHz
for internal integration as an OEM product, mały rozmiar
Throughput of 9600bps
Sleep modes and low current consumption for solar-powered applications
Future update software storage in flash memory
Keyline output for keying external devices when receiving data
Squelch CD with no noise for CSMA applications
Simple integration into any OEM apparatus
HHT, WDS Configuration Software, or OEM processor configuration

Przegląd

Global wireless solutions, industrial wireless performance, wireless data transceiver module.

A complete variety of affordable radios for private point-to-point SCADA and other telemetry applications is available in the Wireless Data Transceiver module.

The frequency ranges used by the wireless Data Transceiver modules include 130-174MHz, 220-222MHz, and 330-512MHz.

A board-level product or a packaged device are both options for wireless data transmitter and receiver modules. The Lottery Terminal is enabled by the board-level product. The bundled unit is housed in a compact box that is ready to be plugged in and power your terminal device and an antenna.

Our Wireless Radio Data links’ niskie zużycie energii, kompaktowy rozmiar, and affordable RF connector are all intended to help you save overall communications expenses. We allow private labeling of our models.

Board Level Units

The PCBA board level unit is a single board measuring approximately 3.5 x 4.75 cale(8.90 x 12.07cm).

It comes complete with an RF connector and RS-232/485 or TTL interface via a header connector or an edge-mounted DB-25.

An optional piggyback board is available for RS-485/422 applications.

The board-level unit is fully type accepted and includes its own RF shielding.

It may be inserted into your device as simply an internal radio, or it can be tightly integrated within the product.

By using the processor in your RTU to access radio parameters your unit.

LEDs provide a rapid assessment of operating status.

The available configurations are as follows:

• OEM board TTL,8 Vdc input

• OEM board RS-232,10-30 Vdc input

• OEM board TTL and piggybacked RS-485,10-30 Vdc input

Digital Modems:

• 9600bps in 12.5kHz channel

• 19.2kbps in 25kHz channel

Analog Modes:

• Bell 202

• External Modem(4 wire audio) with VOX, switchable Pre-and De-emphasis

Wireless Data Transceiver Packaged Units are the board-level unit in a small extruded case and are available in either RS-232 or

RS-485 user interface and a 10-30Vdc input voltage.

Specyfikacja

150 and 450MHz Licensed OEM Board Level
19121: 130 – 174 MHz
19122: 220 – 240 MHz
19124: 330 – 512 MHz
19129: 800 – 960 MHz
Synthesized, Półdupleks, Kanał
12.5kHz Channel Spacing, Split Freq or Simplex
Primary Power
Napięcie: 10 to 30Vdc(2W RF Output)
10 to 16Vdc(25W RF Output)
RX Supply Current: 75 ma typical@ 13.8Vdc
TX Supply Current: 480 ma typical @13.8 Vdc
With output power set to 2 watów
5.0 A typical @ 13.8Vdc
With output power set to 25 watów
Circuit Protector: 5A board mounted Fuse, wewnętrzny
Reverse Polarity Protection: Diode
across primary input
Interfejs danych
Berło: RS-232/485 Through DB-25 Connector
Baud Rates Supported at
Interface Port: 1200,2400,4800,9600,19200
Over-the-Air Data Rate: 9600 bps
Data Latency: <15 ms typical
Nadajnik
Frequency Ranges(150 MHz): 130 do 174 MHz
Frequency Ranges(220 MHz): 220 do 240 MHz
Frequency Ranges(450 MHz):
330 do 355 MHz
355 do 380 MHz
380 do 400 MHz
400 do 420 MHz
420 do 450 MHz
450 do 480 MHz
480 do 512 MHz
406 do 430 MHZ(Canadian Pian)
Frequency Increments: 6.25 kHz or 5 kHz
(Factory Configurable)
Typ modulacji: 4 Level CPFSK
Carrier Power:
100 mv, 1Wat, 2 Watt Programmable
5Wat, 10Wat, 25Watt Programmable
Higher power output versions available-
contact factory
Duty Cycle: 50%(100% with additional heatsinking)
Output Impedance: 50 Ohm
Frequency Stability: 1.5 ppm, -40℃ do +70 ℃
Channel Spacing: 12.5kHz/ 25 kHz
Spurious and Harmonics: -65 dBc
Time-out Timer 1 do 225 Seconds
Transmitter Keying: On Data
Key-up time: 2 ms
Approvals
Bezpieczeństwo:
Europe-ETSI CE ENTELA
(various frequency bands available for CE
model-consult factory)
US-ENTELA
Regulacyjne: FCC-consult factory for available
frequency bands

Odbiorca
Frequency Ranges(150 MHz): 130 do 174 MHz
Frequency Ranges(220 MHz): 220 do 240 MHz
Freuency Ranges(450 MHz): 330 do 355 MHz
350 do 380 MHz
380 do 400 MHz
400 do 420 MHz
420 do 450 MHz
450 do 480 MHz
480 do 512 MHz
406 do 430 MHz(Canadian Plan)
Rodzaj: Double Conversion Superheterodyne
(84 MHz i 450 kHz IF)
Frequency Stability: 1.5ppm, -40 to+70℃
Spurious and image rejection: -70dB
Wrażliwość: 12dB Sinad@-116dBm
Data Performance: 1×100 -6 @ -108 dBm
intermodulation Rejection: -70 dB Minimum
Selectivity: 55dB typical at Adjacent Channel (EIA)
Pasmo: 12.5 kHz/25 kHz
Environmental: 12.5 kHz/25 kHz
Zakres temperatury: -40 to+70℃
Wilgotność: 0 do 95% @ 40℃
Waga: Board: Około (135sol,2W)
Enclosed: APProx (821sol,2W)
Enclosed: Około (1000sol,25W)
Board Size: 11.4 cm W x 1.9 cm H x 9.7 cm D (2W)
8.3 cm W x 1.3 cm H x 4.8 cm D (2W)
Enclosed Size: 16.9 cm W x 3.4 cm H x 11 cm D (2W)
18.4 cm W x 5cm H x 14.3 cm D (25W)
Enclosed Type: Aluminium