ਫਿਲਟਰ

COFDM Modulator-Demodulator Module 2X video Encoder-Decoder Board hdmi cvbs low latency

Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming COFDM

drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi cvbs

COFDM ਮੋਡਿਊਲੇਟਰ-ਡੀਮੋਡਿਊਲੇਟਰ ਮੋਡੀਊਲ 2X ਵੀਡੀਓ ਏਨਕੋਡਰ-ਡੀਕੋਡਰ ਬੋਰਡ hdmi cvbs ਘੱਟ ਲੇਟੈਂਸੀ

Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming COFDM

drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi cvbs

COFDM ਮੋਡਿਊਲੇਟਰ Demodulator ਮੋਡੀਊਲ ਏਨਕੋਡਰ ਡੀਕੋਡਰ HDMI CVBS AV ਇਨਪੁਟ AES 256 FHD RF ਸਟ੍ਰੀਮਿੰਗ

SKU: Vcan1776 ਵਰਗ: COFDM, TX RX ਮੋਡੀਊਲ, ਯੂਨੀਡਾਇਰੈਕਸ਼ਨਲ ਇਕ-ਵੇਅ ਟੈਗਸ: COFDM, cofdm demodulator, ਇੱਕ ਹੀ ਰਸਤਾ

COFDM ਮੋਡਿਊਲੇਟਰ Demodulator ਮੋਡੀਊਲ ਏਨਕੋਡਰ ਡੀਕੋਡਰ HDMI CVBS AV ਇਨਪੁਟ AES 256 FHD RF ਸਟ੍ਰੀਮਿੰਗ

COFDM Modulator-Demodulator Module 2X video Encoder-Decoder Board hdmi cvbs low latency — COFDM Modulator-Demodulator Module 2X video Encoder-Decoder Board hdmi CVBS low latency

ਵਿਸ਼ਾ - ਸੂਚੀ

Another side view

drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi cvbs — drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi CVBS

Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming parameter configuration board — COFDM Modulator Demodulator HDMI CVBS Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming parameter configuration board

COFDM Encoder module, ਸੀਵੀਬੀਸ / HDMI ਇੰਪੁੱਟ, IP output

Composite CVBS input IP RJ45 Ethernet output Ultra-low latency encoder board, HDMI CVBS Encoder — ਕੰਪੋਜ਼ਿਟ CVBS ਇੰਪੁੱਟ IP RJ45 ਈਥਰਨੈੱਟ ਆਉਟਪੁੱਟ ਅਲਟਰਾ-ਲੋ ਲੇਟੈਂਸੀ ਏਨਕੋਡਰ ਬੋਰਡ, HDMI CVBS ਏਨਕੋਡਰ

For More details about the COFDM encoder board, please visit here

COFDM Encoder module Advantage:

ਅਤਿ-ਘੱਟ ਲੇਟੈਂਸੀ H.265/H.264 ਆਡੀਓ ਅਤੇ ਵੀਡੀਓ ਏਨਕੋਡਿੰਗ ਅਧਿਕਤਮ ਸਮਰਥਨ 1080P@60 ਰੀਅਲ-ਟਾਈਮ ਵੀਡੀਓ ਕੈਪਚਰ ਅਤੇ ਏਨਕੋਡਿੰਗ
HDMI ਜਾਂ AV ਆਡੀਓ ਅਤੇ ਵੀਡੀਓ ਇੰਪੁੱਟ, ਏਨਕੋਡਿੰਗ ਦੇ ਬਾਅਦ, ਈਥਰਨੈੱਟ ਪੋਰਟ ਆਉਟਪੁੱਟ ਜਾਂ ਵਾਇਰਲੈੱਸ ਮੋਡੀਊਲ ਲਈ ਆਉਟਪੁੱਟ, ਵੀਡੀਓ ਏਨਕੋਡਿੰਗ ਬਿੱਟ ਰੇਟ ਨੂੰ ਗਤੀਸ਼ੀਲ ਰੂਪ ਵਿੱਚ ਕੌਂਫਿਗਰ ਕੀਤਾ ਜਾ ਸਕਦਾ ਹੈ
ਆਡੀਓ ਇੰਪੁੱਟ ਅਤੇ ਆਡੀਓ ਡੀਕੋਡਿੰਗ ਆਉਟਪੁੱਟ ਸਮਰਥਨ
ਦੋ ਵੀਡੀਓ ਦਾ ਸਮਰਥਨ ਕਰੋ (HDMI + AV) ਸਮਕਾਲੀ ਇੰਪੁੱਟ ਇੰਕੋਡਿੰਗ (ਚੋਣ ਨੂੰ, ਡਿਫੌਲਟ HDMI ਜਾਂ AV ਏਨਕੋਡਿੰਗ ਹੈ, ਦੋ ਇਨਪੁਟ ਸੋਰਸਿੰਗ ਵਿੱਚੋਂ ਇੱਕ ਚੁਣੋ). )
ਵੈੱਬ UI ਜ serial port UART AT command for configuration management

HDMI CVBS composite SDI video input encoder board digital IP ethernet output H264 H265 module board

COFDM transmitter module

COFDM Wireless video transmitter module RCB board

Change RF connector from IPEX to MMCX for COFDM wireless video transmitter encoder modulator board

COFDM modulator-demodulator datasheet download

COFDM demodulator Vcan1776RX-H264 datasheet

Encoder Modulator Decoder Demodulator Module — COFDM-RF-demodulator-ਡੀਕੋਡਰ-ਰਿਸੀਵਰ-H264-Vcan1776RX-H264

The last version of the TX RX board

TX: V6.5.6p

RX: 4.1.2ਪੀ

ਅਕਸਰ ਪੁੱਛੇ ਜਾਂਦੇ ਸਵਾਲ

1. What should I do when I found one Tx module doesn't generate RF output power?

COFDM-Transmitter-Module

Question1: Could you please tell me part number of this component, we try to find localy and check. ਜਵਾਬ 1: It is a inductance named LOH32PN2R2NNC.

COFDM-Transmitter-Module-no-tx output power

Suggest Check Points: If the power supply current of the board is well but there is no RF output, maybe the below component TC1-1-13MX+ is generally damaged.
In order to avoid damage to this device during transportation (the device itself is relatively high), we ordered red glue protection for this device when we shipped it.

COFDM Video Data Transmitter module

The engineer also suggests that you check to see if the cable is loose or in poor contact.
Please try to replace the FPC cable connecting the two boards
We can provide spare parts if you're sure which one.

2. Can you offer me the UART AT command file for this model?

ਜਰੂਰ

ਕਿਰਪਾ ਕਰਕੇ ਹੇਠਾਂ ਦਿੱਤੇ ਲਿੰਕ ਦੀ ਜਾਂਚ ਕਰੋ.

ਏਨਕੋਡਰ ਮੋਡਿਊਲੇਟਰ ਡੀਕੋਡਰ ਡੀਮੋਡਿਊਲੇਟਰ ਮੋਡੀਊਲ ਪੈਰਾਮੀਟਰ ਕੌਂਫਿਗਰੇਸ਼ਨ ਨਿਰਦੇਸ਼ COFDM AT ਕਮਾਂਡ

3. How does this COFDM Video transmitter and receiver support an IP camera?

1. It is not easy to connect to IPC for a one-way COFDM link. We have an H264 model, which is connected to IPC input by expanding the network port, but there are requirements for IPC models (not all models of IPC can be well connected with COFDM links), we have tested the IPCs of Hikvision, Dahua, and Xiongmai, and found that the connection effect of Hikvision is quite ideal.

2. It is impossible to directly remove the HDMI CVBS encoder and connect the IP Camera to the COFDM Transmitter board. One-way COFDM connection to IPC requires special technical methods to realize.

3. The best way is to recommend using our two-way image transmission transceiver, which directly supports the IP camera.

4. If the customer must use the COFDM transmitter board to support the IP camera, there are two points to pay attention to.

5. The first point is a technical problem. We need to use an alternative method to allow unidirectional COFDM links to be used with IPC.

6.If you consider IPC from the perspective of cost reduction, you don't need to consider it. Because the encoding board and decoding board are still necessary, the cost cannot be saved.

7. The second point is the customer's usage habit, which is no longer the traditional two-way link method. They can view the IP Camera Video and even control the PTZ of the IP Camera via the web page or PC-side PC software (UART AT commands).

8. Because of this model wireless link is a COFDM one-way link; there is no reverse data (only one-way transmission; data cannot be transmitted from the receiver to the transmitter); the customer can only watch the video of the IP Camera and cannot reversely configure the IP Camera's parameters or control the PTZ of the IPCamera.

9. This is a problem that many customers overlooked at first and later complained about after using it.

10. So we don't recommend that the client choose a one-way COFDM transmitter and receiver for the IP camera. We have a better solution for the IP Camera via two video link transceivers.

4. Could you please give me the Required C/N (BER=2x10-4 after Viterbi) for different the bandwidths 2, 4, 6, ਅਤੇ 8 Mhz of HDMI video link we use?

1. ਵਰਤਮਾਨ ਵਿੱਚ, the receiver only provides two parameters of signal strength and bit error rate, and there is no C/N parameter

2. What parameters do you need to adjust according to different bandwidths? If it is a video code stream, the transmitter encoding board itself will automatically calculate the appropriate video stream code rate according to the currently used wireless parameters (ਨੂੰ ਦਰਸਾਈ, ਜੀਆਈ, ਸੀਆਰ, ਆਦਿ), and the video code rate will be found after changing the bandwidth with the parameter board will automatically adapt.

cofdm video transmitter parameter configuare tool

3. ਸਵਾਲ, If our camera quality is good enough for both 4 MHz ਅਤੇ 8 MHz ਚੌਡ਼ਾਈ. ਇਸ ਮਾਮਲੇ ਵਿੱਚ, Should the customer choose 4 MHz ਜ 8 MHz?

ਜਵਾਬ: Our one-way COFDM shipments use 4Mz wireless bandwidth by default, corresponding to a video bit rate of 3.12Mbps, which is enough for 1080p; If changed to 8MHz wireless bandwidth under the same conditions, the video bit rate doubles to 6.24Mbps. All customers can choose between wireless bandwidth 4MHz and 8MHz, even 6MHz can also be considered.

4. ਸਵਾਲ: Which is better for this tx+rx set from a receive sensitivity view?

ਜਵਾਬ: For wireless links, it can be simply considered that the receiving sensitivity will be higher at lower wireless bandwidths. From the perspective of receiving sensitivity, 4MHz>6MHz>8MHz

5. What HDMI version is standard in Modulator input?

HDMI 1.4

6. Do you have any COFDM Relay Repeater Modules for the Wireless Video Transmitter and Receiver？

ਜਰੂਰ

ਕਿਰਪਾ ਕਰਕੇ ਹੇਠਾਂ ਦਿੱਤੇ ਲਿੰਕ ਦੀ ਜਾਂਚ ਕਰੋ

ਡਰੋਨ UAV ਵਾਇਰਲੈੱਸ ਵੀਡੀਓ ਟ੍ਰਾਂਸਮੀਟਰ ਅਤੇ ਰਿਸੀਵਰ Vcan1870 ਲਈ COFDM ਰੀਲੇਅ ਰੀਪੀਟਰ ਮੋਡੀਊਲ

COFDM Relay repeater for wireless video transmitter and receiver — ਵਾਇਰਲੈੱਸ ਵੀਡੀਓ ਟ੍ਰਾਂਸਮੀਟਰ ਅਤੇ ਰਿਸੀਵਰ ਲਈ COFDM ਰੀਲੇਅ ਰੀਪੀਟਰ

7. Could send me a data measurement of sensitivity for 4/6/8 MHz cases? ਉਦਾਹਰਣ ਲਈ, for QPSK, 1/2ਸੀਆਰ, 1/32GI what threshold reception RX's input level (dBm)?

Single channel receiving sensitivity:

-97+/-1DBM at QPSK 8MHz,

-98+/-1DBM at QPSK 6MHZ,
Sensitivity increased by 3dbm when receiving with dual antennas

8. Does this module support over 1.4G? for example 2.4G, 3ਜੀ, or 3.6G？

ਜੀ, ਸਹਿਯੋਗ ਨੂੰ.

COFDM Video encoder modulator transmitter module 3.5G and 4G test result.

9. Where can I download the UDP player? We recommend Splayer_v4.2_2020.6.6 which we use frequently.

The receiver default firmware supports RTSP player, some clients prefer UDP player, which we also can offer, then RTSP player doesn't support. （RTSP and UDP can only choose one of the two firmware）

Please download at the below link.

Splayer_v4.2_2020.6.6

https://drive.google.com/file/d/1ihzUhfnx2Wo3zLO8UAs1aUQeLswonJD-/view?usp=sharing

Splayer_v4.3_2022.10.22

https://drive.google.com/file/d/1PQc-LZ55qGnjeMsjkHYSloHfY3NEUsGH/view?usp=drive_link

UDP Player: Splayer setting for living stream

10. Can you offer a metal box to protect the COFDM receiver board?

ਜਰੂਰ, ਕਿਰਪਾ ਕਰਕੇ ਹੇਠਾਂ ਦਿੱਤੀ ਤਸਵੀਰ ਦੀ ਜਾਂਚ ਕਰੋ.

long range Wireless Video Transmitter and Receiver for Camera drone

ਅਜੇ ਵੀ ਇੱਕ ਸਵਾਲ ਹੈ?

ਹੋਰ ਜਾਣਕਾਰੀ ਲਈ ਕਿਰਪਾ ਕਰਕੇ ਸਾਡੇ ਨਾਲ ਸੰਪਰਕ ਕਰੋ.

ਆਪਣਾ ਸਵਾਲ ਭੇਜੋ

How to switch HDMI or CVBS video input via the UART AT command?

How to upgrade the COFDM video receiver

How to upgrade the COFDM drone video encoder modulator board

COFDM Wireless Video encoder modulator board delay low latency — COFDM Wireless Video encoder modulator board

ਸਮੀਖਿਆ

ਅਜੇ ਤੱਕ ਕੋਈ ਸਮੀਖਿਆ ਹਨ.

ਦੀ ਸਮੀਖਿਆ ਕਰਨ ਲਈ "ਪਹਿਲੇ ਰਹੋCOFDM ਮੋਡਿਊਲੇਟਰ Demodulator ਮੋਡੀਊਲ ਏਨਕੋਡਰ ਡੀਕੋਡਰ HDMI CVBS AV ਇਨਪੁਟ AES 256 FHD RF ਸਟ੍ਰੀਮਿੰਗ” ਜਵਾਬ 'ਰੱਦ