høy høyde luftballong videosender data transceiver

Do you have internet long-range routers? I need it at least 20 eller 30 kilometers in a high-altitude balloon. We are doing science experiments at our university with high-altitude balloons.

TX900 er anbefalt.
We also have a buyer from European clients to use this model.
They do space weather monitoring, they need wireless video transmission equipment to monitor their equipment and download data.
The person also can upload the control command for some experiment types of equipment from the ground receiver to the balloon.
The bandwidth is 20mbps, is that ok for you?

We are planning to mount the transmitter device on a balloon that will reach a 40 km altitude and receive the video signal on the ground using an auto-tracking antenna. We are looking for an integrated plug-and-play solution. Would this be possible? Takk skal du ha.

Takk. TX900 is recommended.

Klient:
Do you have a datasheet? Could you send me the antennas that work with this video transceiver? Do you have any compatible camera? How many cameras can we use with just one transceiver? Do you have a battery system or power system for the transceiver? Our flight will be 6 hours approx. Do you have batteries that will long 6 timer?

iVcan: Our battery is 7AH, normally we tested time is 2~4 hours, ikke noe problem. If you buy a 15AH battery, it should support 4~8 hours. Please check the attached picture.
The 10W PA transmitter and receiver need 3A@28V (24valgfri avstandskarakter), please try to source at your side.

Klient:
This flight will be without tribulation. So we will power on all the equipment right before the flight.

Angående videosenderen, hva er tilgjengelige frekvenser? Kunne vi velge 2.4 GHz as an option or it has to be 1.4GHz or 800MHz?
Også, do you provide RF cable from the video transmitter to the antennas?

iVcan:
1. There are three frequencies to choose from. If you choose 2.4G, then we will arrange the 2.4G Power Amplifier inside and the 2.4G transmitter and receiver antenna. So you should confirm which frequency you need before delivery. Antennen er tilpasset i henhold til denne frekvensen.
UI Wireless 1.4G

2. We can offer you the RF cable from the transmitter to the antenna, how long do you need it for? It will be easy to have interfered if the cable is too long. So how long do you really need it for the best installation?

Klient:
That would be perfect. I guess that sweeping the frequency to 2.4GHz will not affect the link budget and we still have 10W and 150Km coberture range?
Regarding RF cable we will need about 3m cable because we will put the video transmitter in the middle of the capsule and this has a 2.5m radius so 3m approx.

iVcan:
Angående RF-kabelen, our engineer doesn’t recommend that you use so long. Det vil være en redusert 0,5dB for en meter RF-kabel. For the 3-meter RF cable, the signal strength will be reduced by 1.5 dB.

In order to support long-distance at 150km, Can you use an RF cable that is less than 1 måler?

Faktisk, the transmitter is very small, det er bedre å holde kort avstand fra senderen til senderantennen. Strømforsyningskabelen for senderen og ethernetkabelen fra kameraet til senderen kan være lengre siden det ikke er tap som RF-kabel.

Klient:
I will check with the structure team that we need to put the video transmitter as close to the antenna as possible and get back to you with the RF cable length.

The system team asked me about the attachment system for the S transmitter that will be inside the capsule. Do you have any mounting brackets or recommendations? Ideally, the video transmitter will be placed inside a rack.

iVcan:
Regarding how to install it, vennligst sjekk bildet nedenfor.
how to fix the balloon wireless video data transmitter and receiver
There are four screws hole in the metal box, above the picture red arrow. It also can be bound by some cables like the one below.
lock ties cable

Hallo, we are a high school that has the launch of radiosondes in its educational projects.

Klient:
I siste lansering, vi brukte a 1.2 GHz video transmitter to transmit images from ​​the stratosphere to the ground. Vi er ikke fornøyd med resultatet og vi ser etter en videosender med følgende egenskaper: ​​1.2ghz frequency, FULL HD, RF-effekt større enn 500mw, vekt mindre enn 100gr og forbruk ikke over 500ma.

iVcan:
May I know what is the distance from the ​stratosphere to the ground?
From the internet, I get that the distance is from 8km to 50km.
Vi tilbyr også en lignende modell for Spanias værobservasjon og prediksjon av hydrogenballonger i atmosfæren, som trenger 150km.
The above model TX900-5W-50km is recommended.
​Your need: 1.2ghz frequency FULL HD, RF-effekt større enn 500mw, vekt mindre enn 100gr og forbruk ikke over 500ma.
TX900-5W050km: 1.4Ghz frequency, Full HD 1080P HDMI- eller Ethernet-kamera, RF kraft 2 watt, vekt er 142 gram.

Teamet vårt har som mål å sende raketten utover 40 km og deretter 100 km, har du noen anbefalinger for senderen, mottaker, og kamera?

I had a previous client with an application similar to yours. He used a hot air balloon to rise 50 til 80 kilometers above the ground to monitor the environment. He just bought our long-distance wireless video transmitter and receiver to monitor whether the scientific instruments in the balloon are normal.

Gratis forespørsel, Gratis sitat, Gratis støtte, Gratis prøvedemovisning .

ivcan whatsapp vcan group limited
chat us at telegram-ivcancom

Legg igjen et svar

e-postadressen din vil ikke offentliggjøres. Obligatoriske felt er merket *

Oppdag mer fra iVcan.com

Abonner nå for å fortsette å lese og få tilgang til hele arkivet.

Fortsett å lese

Trenger hjelp på WhatsApp?