Ko var darīt bezvadu video raidītājs?
COFDM HDMI raidītājs, Bezvadu Video uztvērējs 10km 30km 80km 10W PA 150km 4K LOS NLOS HDMI SDI CVBS Lētākais Garākais Ieteicams Datu saites drons PA jaudas pastiprinātājs IP tīkls OFDM
Bezvadu video raidītājs kamerai
Tipiski lietojumi un lietošanas scenāriji
Vai jums ir līdzīgs pieprasījums?
Bezmaksas aptauja, Bezmaksas citāts, Bezmaksas atbalsts!
1. Vai tev ir 150 kilometers of 10-watt telemetry for a drone at 915Mhz? Man nav nepieciešams pārsūtīt video, tikai Mavlink ziņojuma dati.
Mums ir nepieciešams datu pārraides ātrums 57000 par Mavlink.
2. Man ir nepieciešama bezvadu video raidītāja sistēma no krasta līdz dragai jūrā 5 km pārraides attālumam.
Vai varat sniegt cenu bezvadu video raidītāja sistēmas piegādei?, we operate a dredge and want to transmit video from shore to the dredge over a maximum distance of 5 kilometri. Tas atrodas jūras vidē, tāpēc tam jābūt izturīgam un arī jādarbojas 12 volti bez interneta savienojuma.
3. I am looking for a mini and wearable cofdm tx rx, NLOS, vienvirziena, AHD vai SDI-HD 1080P kamera, 1KM liela attāluma bezvadu video raidītāja uztvērēja dzīvā demonstrācijas attēla datu pārraide, 170-860Mhz, 200-metru pārraides attālums, un bez dzesēšanas ventilatora trokšņa dēļ.
4. Esmu UAV izstrādātājs, un man ir nepieciešams risinājums maniem gaidāmajiem bezpilota lidaparātiem. man vajag 20 km HD video un Mavlink telemetrijas pārraides un uztveršanas sistēma. Atbalstīta kardāna kamera, Gimbal ar tālummaiņu, un mērķa izsekošana. Vai ir iespējams izmantot portatīvo datoru, lai vadītu PTZ kameru ar jebkuru programmatūru? Kāds ir svars, tālummaiņas līmenis, un kameras cena?
5. Mēs izstrādājam valkājamas ierīces, kas aprīkotas ar divām USB nano kamerām. Pašlaik bezvadu straumēšanai izmantojam wifi tīklu, kam ir ierobežots diapazons. Man bija jautājums, vai jums ir video raidītājs/uztvērējs, kas varētu darboties 1 km diapazonā bez redzamības līnijas un zema latentuma..
6. Mēs esam autonoms robotikas uzņēmums, tagad meklēju modemu, piemēram, RFD900, bet ar video+datiem priekš 5 līdz 10 km, Pilni dupleksi dati, un Sbus ieeja.
7. Meklēju raidītāju un uztvērēju, COFDM ar divvirzienu audio un vienvirziena video, I have to communicate with bidirectional audio, garš diapazons, Es domāju, ka 2W varētu būt labi. Ko jūs varētu man ieteikt?
Manpack bezvadu video raidītājs divvirzienu balss domofons RC NLOS COFDM 2KM-20KM
8. Man ir vajadzīga bezvadu video pārraides sistēma, kur varu izmantot 4 kameras iekšā 4 dažādās vietās, un es vēlos to skatīties vienā ekrānā. 1 kilometra platībā ir viens ēkas šķērslis. Raidītājs vienmēr būs kustībā, bet uztvērējs būs nekustīgs. Mums ir jādzird šajā jomā strādājošo cilvēku balss un jārunā, kad tas ir nepieciešams, vai varat to iekļaut sistēmā?
9. Es gribu jautāt par jūsu liela attāluma video raidītāju, instalēt manā UAV, raidītājs var pārraidīt video no UAV meža vidū, lai pārbaudītu ugunsgrēku mežā aptuveni 20-30 km attālumā.
10. Meklēju nelielu raidītāja/uztvērēja moduli ar a 1-2 km diapazonā, kas varētu pārraidīt video datus vēlamajos kadru ātrumos ar zemu latentumu, un bez redzamības līnijas. Piemēram, pašlaik izmantojamie divu kameru moduļi darbojas 19201080@ 30-60 kadri/s, un vēl viena kamera plkst 320240@120 FPS (UN).
11. Mums ir vajadzīgs nlos 1 km mini un viegls svars, kas ir neredzams, piemēram, spiegu video tx un tx, īsa vai elastīga sloksne tx mini antena, kas paslēpta uz cilvēka ķermeņa, atbalsta tīmekļa kameru, un atbalsta divvirzienu audio pēc izvēles.
12. Meklēju divu joslu bezvadu video datu pārraides raiduztvērēju. Viena frekvence (1.7G) tiek izmantots, lai augšupielādētu dronu vadības datus, un cita frekvence (1.4G) lai lejupielādētu video no drona uz zemes. Cerams, ka tas var efektīvi izvairīties no bezpilota lidaparātu traucētāju iejaukšanās bezpilota lidaparātos un uzlabot bezpilota lidaparātu izdzīvošanas līmeni..
Pielāgojama frekvence, Divfrekvences UAV video un datu pārraides raidītājs un uztvērējs
13. Mums ir nepieciešama augstas izšķirtspējas video pārraides sistēma. Raidītājs ir uzstādīts uz ēkas jumta augstumā 10-15 skaitītāji, un uztvērējs atrodas automašīnā, ieskauj atklātas teritorijas, un redzamības līniju. Komunikācijas attālums ir 10 km. Lūdzu, iesakiet piemērotu risinājumu.
14. Sveiki, esam vidusskola, kas savos izglītības projektos laidusi klajā radiozondes. Pēdējā palaišanā, mēs izmantojām a 1.2 GHz video raidītājs attēlu pārraidīšanai no stratosfēras uz zemi. Neesam apmierināti ar sasniegto rezultātu un meklējam video raidītāju ar sekojošām īpašībām: 1.2ghz frekvence, FULL HD, RF jauda ir lielāka par 500 mw, svars mazāks par 100gr un patēriņš nepārsniedz 500ma.
Mēs piedāvājam līdzīgu modeli arī Spānijas laika apstākļu novērošanai un prognozēšanai, izmantojot ūdeņraža balonus atmosfērā, kam vajag 150km. Mēs iesakām TX900-5W-50km. 1.4 GHz frekvence, Full HD 1080P HDMI vai Ethernet kamera, RF jauda 2 vati, svars ir 142 grami. patēriņš 22 vati.
15. Sveiki, Man ir nepieciešama datu pārraide no Ethernet porta. Apkārt 1 megabits un uztvērējs.
5 Watts Raidītājs 1MBps ar Ethernet interfeisu un uztvērējs ar Ethernet. Man vajadzīga vienvirziena komunikācija. raidītājs uz drona puses uztvērēja lidmašīnā. Tas nosūta datus, kas nāk no Ethernet porta.
16. Mēs izstrādājam jaunu UAV, meklēju 150km HD video raidītāju, dupleksā darbība, darbina 6s akumulators 22,2V. Ja iespējams, palieliniet diapazonu līdz 500 km.
17. Vēlos iegādāties divvirzienu drona raiduztvērēju.
18. Meklējam IP radio. Mums ir jāpārraida un jāsaņem Ethernet, kas vienlaikus satur HD video un datu kontroli. interfeisam ir jābūt līdzīgam RJ45 (vai vēlams izturīgāks), vai mēs varam tos izmantot MESH? Es domāju, ka pietiek ar 1 W maksimālo jaudu, Šobrīd veicam 4km.
TX900 ieteicama sieta versija.
19. Mums vajadzīgajai pārvades sistēmai, sīkāku informāciju skatiet tālāk.
a) SDI ieeja, lai atbalstītu 3G-SDI (maks. 1080p60)
b) Atbalstiet apraides kvalitātes saspiešanas formātu (H.264 @Galvenais profils)
c) Atbalstiet iegulto audio (Maksimāli 16 kanāli)
d) Atbalstiet NLOS
e) Atbalsta pārraides jaudu 10W
f) Support GPI input on the receiver and send the On/Off signal back to the
raidītājs
g) Zems latentums — 200–300 ms
h) Atbalstiet COFDM un QAM64
es) Atbalsta 128 bitu AES šifrēšanu
j) Atbalsta DC10V līdz DC28V
k) Atbalstiet kļūdu labošanu uz priekšu 1/2, 2/3, 3/4, 5/6, 7/8
l) Frekvences joslas platums 8Mbps
20. We own and operate 15 aircraft, I am really interested in your 10W PA 50 km diapazons. I would need 50 reception kits so that police officers on the ground can receive video streaming directly from the surveillance aircraft. What would be the price and availability? What is the frequency and the length of the wave used?
21. We need a 5w telemetry transceiver to install on a fixed-wing uav, Our autopilot is Pixhawk cube orange, with amplifiers for 915mhz, or 10w only telemetry without video, pārraides ātrumu 57000 for Mavlink message.
22. We currently request your recommendation of a suitable video link radio that fulfills the following requirements:
- darba frekvence: 2216-2256Mhz
The video link should be capable of operating within this frequency range.
It should have the ability to segregate into separate channels, selectable or tuneable with an 8MHz bandwidth each. - Capability:
We require the video link radio to have the capability of simultaneously downlinking 3 payloads such as an EO/IR payload, a nose camera, and a camera. - Maximum Range/ Operating Distance: 100km
The video link radio should be capable of achieving a range of 100km for reliable transmission. - Connection Type:
We are specifically interested in a video link radio that supports Ethernet connectivity at a speed of 10/100Mbps.
Additionally, it should provide compatibility for SDI video connection. - Video Delay < 200M=ms
The video link radio should offer a video delay of no more than 200ms to ensure real-time video transmission.
23. I need a transceiver for video and data commands, use the on-ground, nlos 10km, slightly have some obstacles. I need to transmit video and custom data. There are a camera and a single-board computer like raspberry pi in each unit of my project, that supports the below, diagram.
- Communication and control: 1X RJ45 Ethernet port; 2X alarm inputs, 1X alarm output; 1X audio input, 1X RS485 input.
- protokols: Support HTTP, HTTPS, FTP, SMTP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, ICMP, DHCP network protocols; support ONVIF and GB28181 protocols.
- Development interface: Support HP-SDK secondary development.
24. What do you offer in RF wireless A/V transmission that is smaller in size(mobils), nlos, secured, RCA or HDMI input, and Frequency available in the USA? security of data, šifrēšana, law enforcement / for nlos surv/intel, Seeking 600ft min efficacy (200 skaitītāji),
Support RCA input, we have three models, COFDM-912T (170-860Mhz, RCA input only), un COFDM-907T (170-860, and 900-930Mhz, RCA+HDMI input both support). 900-930MHz frequency is ok in the USA. So COFDM-907T is recommended.
24. Hi do you have an Analog A/V transmitter and receiver in 2.4 vai 5.8 GHz for long distances (about 5Km)
Atvainojiet, we only have HD 1080p wireless video transmitter and receiver, 2.4G or 5.8G please check Vcan1818, 1.4G is recommended, because of wifi also used 2.4G and 5.8G, and it is easy to have interfered.
25. I would like to do a mini autonomous vehicle project, I would like to know if it is possible to send a live video stream with Rasberry PI and a Python program that sends the stream by RTSP that can be opened by VLC.
If you just need a transfer a live video stream from your camera to Rasberry PI by RJ45, then our Vcan1746 ieteicams. If also need to transfer the live video stream from your robot to a wireless receiver or computer, which supports RTSP protocol by VLC player, then please check our Vcan1726.
26. I’m searching for a specific downconverter, to be used with our own OFDM RF link:
50ohms RF input: 1.435 līdz 1.525 GHz
75 ohms IF output: any frequency band, between 100Mhz and 900MHz
Preferred LO frequency: 1846MHz
Low gain: about 28dB
Hight gain: about 43dB
DC powered from IF output port, 12-24vDC range
27. We are researching a ground robot to explore the rainforest and collect semple in the forest. We are using a radio from another manufacturer to transmit the image and commands between the receiver and the transmitter. But the problem we are facing is regarding the transmission distance. When the robot enters the forest, the maximum distance we are achieving is 100 meters between the transmitter and receiver, but we need much more than that. I was looking at your communication solutions here.
28. We are searching for a transmission for 50-80km, for a meteorological balloon, COFDM-908T-10W is ok? with a 12V battery and HDMI?
29. Sveiki, I need a device that transmits 4 camera video signals and data signals for controlling the robot over 2km for ground-to-ground communication.
30. Sveiki, I need a complete video signal transmission system (one way only) with a range of 80-100 km. I am an aerial photographer and I need a high-quality digital image. The transmitter frequency can be in the range of 170-800 MHz. Interested in the complete set of the transmitter, saņēmējs, and corresponding antennas. An analog signal will be used as an input.
31. Do you have any model which you can support to transmit not only A/V but also data(ex: RS-232 etc.) by any chance?
32. I’m interested in buying your video transmission modules long range. I mean transmitter, receiver PA 2W – 30km, PA 10 W – 100 km,
33. I would like clarification on the two-way data transfer capabilities. Does this support the ability to control, and get telemetry data and video all at the same time with just two modules?
34. I need one encoder with the COFDM modulator, H264 / HEVC ASI, or SDI input. And one receiver with diversity frequency RF COFDM, which is input frequency 2.350-2.450Ghz output 550~650 Mhz or 1350-1450Mhz, bit rate max 8Mhz bandwidth.
35. I want to design and fabricate a drone for surveillance of a seaport area in Mexico. Please let me know if your equipment is adequate for this purpose. Does this equipment allow me to send not only video and sound, but can it also control the drone itself, or do I need a separate control system with PPM or Sbus like Pixhawk or Ardupilot for it? In short, can you help me with the design of a complete system? es, protams, would buy all the needed products as much as available from you. I am used to working with SIYI products and this would be the first time for you. If you are interested I will give you more details on the project.
36. Sveiki. I need a one-way wireless video transmitter and receiver. It must have low weight and will be used in UAV. What you can suggest?
37. We need ONE WAY link with ip UDP video stream, but not two-way. Do you have one-way link ip input on the modulator and ip output on the demodulator?
Mums ir divi modeļi, Vcan1816 un Vcan 1886 to meet your demand.
38. Looking for dual-band booster 2,4-5,8 GHz, with output power 10 W- for use with UAV drones, in territory with big interference ( big parks, forests).
Mūsu Vcan1818 supports 2.4G and 5.8 G. Output power 10W is optional.
39. We are looking for telemetry modules for our project. Please share product information and prices for the 80 to 150-km radio link. Also please indicate if compatible with Pixhawk autopilot. We need a reliable product.
40. Will your product be able to effectively transmit wirelessly through walls? roughly about 500m in distance.
Because we don’t know what your specific wall and environment
So I can’t tell you whether it can go through it or not. I believe that other sellers can not guarantee without knowing the specific situation. You need to test yourself to know this. Here is a test video for your reference. Vienvirziena, Divvirzienu
41. We are interested in unidirectional video transmission at a distance of 15 km in line of sight. It is required to transmit individual frames of BMP format or a JPEG of 1280×1024 pixels without errors. The operating temperature range of the product is from minus 40 to plus 50 ° C.
42. I am engaged in ground robots for agriculture. We are using MATEK Controller with ArduPilot. It is desirable that we can easily connect your equipment.
We need a kit for the longest video transmission with antennas, as well as a telemetry transmission kit (robot control) with antennas. It is desirable that both video and control work at the same distance.
I ask you to send an offer with a manual and specifications for such equipment, as well as the cost.
- In the video kit, man vajag 2 cameras with which your equipment works.
- In the communication transmission kit, I need a joystick with which your equipment works.
42. I want to buy a long-range COFDM-912T transmitter with a 5-watt amplifier.
diapazons 450 – 1300 MHz. Darbības frekvences (8 kanāli) un antenas viņiem: 477, 610, 675, 724, 816, 970, 1180, 1230 Mhz. Virziena antena (30-60′) – for Rx. Antenna circular orientation – for Tx. I need a complete long-range video link for the UAV plug&play kit.
Papildus, I ask you to recommend a video camera with gyro stabilization (UAV use) suitable for this radio transmitter.
43. I am engaged in ground robots for agriculture. We are using MATEK Controller with ArduPilot. It is desirable that we can easily connect your equipment.
We need a kit for the longest video transmission with antennas, as well as a telemetry transmission kit (robot control) with antennas. It is desirable that both video and control work at the same distance.
- In the video kit, man vajag 2 cameras with which your equipment works.
- In the communication transmission kit, I need a joystick with which your equipment works. Paldies.
iVcan: Our transmission system is a wireless transparent transmission system. We can transfer the video and any data, if your camera supports PTZ (Pan/Tilt/Zoom function) and joystick, then connect to our system correctly, we can transfer the data, and help you to operate them wirelessly.
44. We have a set of 5 X USB cameras. We are looking for a Multiplexor that can combine these 5 images before we put them through the radio.
45. Sveiki, I’m using 2 nos of PTZ camera and able to control it from ground control. Can I use this transmitter and receiver to control my RC device too or is it unable to be integrated maybe got another solution?
46. I want a 30km video camera audio ethernet data transfer.
47. I live in the USA and need something to transmit an HD SDI video from a camera to a ground station with little to no lag. I would also love to get a LBUS signal to be transmitted also in the packets.
48. The data rate required is 30Mbps for video transmission, Full duplex transmission.
49. Sveiki. I need a one-way wireless video transmitter and receiver. It must have low weight and will be used in UAV. What you can suggest?
50. We need to bring to the ground a video feed from planes flying at about 350mph, up to 10,000ft, in a 10mi radius from the main point. We will bring the video feed to a production truck for live broadcast. The camera can be IP or HDMI.
51. Can you suggest a good-quality CODFM video link? Our input is NTSC video from a camera.
The receiver Output should be HDMI into our monitor. (720 is acceptable, 1080P preferred). Link to operate in 902 -928 Mhz band (1 watt Tx power level). Looking for low latency and a very good NOL environment
52. Can you provide a modem with the specifications below? – Biežums: 1.4~1.6Ghz (1Mhz unit setting) – joslas platums: 2Mhz – Speed@ Distance: duplex10Mbps @ 8km (5 miles) – fakultatīvs: Spread Spectrum Frequency Hopping.
53. Our team aims to send the rocket beyond 40 km and then 100 km, do you have any recommendations for the transmitter, saņēmējs, and camera?
54. My project is to have a Base Station that receives data from a robot (cameras, sensor data, etc…) and sends data to the robot to control it (bidirectional system).
55. I will need a solution to transmit wireless the video from 6 cameras within a range of 5 Kilometers. What solution can you propose?
56. il prodotto + economico per trasmettere e ricevere dati tcp/ip alla distanza da 3 a 5Km. cortesemente anche il costo e la disponibilita’.
57. Here are my project details and demand.
- I want to connect 4-6 cameras into one transmitter, and then transmit all the camera video streams through one transmitter module. All my cameras are Pan-tilt-zoom cameras with night-vision capabilities
- All The video camera output types can be the same or different type. I am mostly focusing on RJ45 (Ethernet IP) or also HDMI. (But they might have different output types).
- Then I want to receive all the video streams into one receiver module (from one transmitter). From the receiver module, I will take the output of 4-6 cameras (RJ45 Ethernet IP or HDMI) and display it on screen (probably HDMI port)
- Let’s Say I have 4 Kameras, I want to see the video feed of 4 cameras in a single screen (Split screen mode)
- I will send a control command from the Receiver to the Transmitter, to control my device. What is the procedure for uploading control command data to the transmitter from the receiver? I also want to get some response data from the transmitter to the receiver. What is the procedure to send response data to the receiver from the transmitter?
man vajag 3 sets of such setup above for controlling 3 harvesters by 3 different people remotely. They each will control one harvester remotely via control command and see the video feed from 4-6 cameras (per harvester) in one monitor (in split screen mode). I know “Arduino” decently. If your engineers are familiar with “Arduino”, please give me some hints.
Tell me the pricing also. If it’s good quality with a decent price point, I might consider buying some more after some successful trial run.