30Km long distance COFDM HDMI Wireless Video Transmitter Bieži uzdotie jautājumi
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T
30-150Km tālsatiksmes COFDM HDMI raidītājs Bezvadu video pārraides sistēma Uztvērējs pilns komplekts Audio Video TX RX priekš UAV Drone UGV 1080P
iezīme
- Augsti integrētas, moduļu kombinētais dizains
- Izmantojot COFDM modulācijas tehnoloģiju, H.264 image coding technology
- Tas var pārraidīt vienu 1080P HDMI kanālu (izvēles SDI) signāls
- Zemāka kavēšanās, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 milisekundes.
- All-round saziņa, nebaidās no ēkas sienām
- Ātrgaitas komunikācija starp ceļošanu, the maximum moving speed can reach 600 km / h.
- Raidītāja siltuma izlietnes veida alumīnija korpuss, triecienizturīgs, Waterproof case is optional.
- Atbalstiet LOS un bezredzes (NLOS) mobilā pārraide
- Attālums nav mazāks par 30 kilometru redzes līnijas apstākļos ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- Sinhrona audio un video signālu uztveršana, augstas izšķirtspējas HDMI1080P vairāku formātu pēc izvēles, standarta izšķirtspējas izejas DVD attēlu kvalitāte
- Uztvērējs var realizēt video ierakstīšanas un dublēšanas funkcijas
- 128-bitu AES šifrēšana un atšifrēšana
- Pieejama pilna pielāgošana
- Upgrade tool: Parameter Configure board
- lietošana: UAV, Transportlīdzekļi & UGV
- modulācija: COFDM
- darba spriegums: DC11V-DC13V
- Darba strāva: 0.5~ 2W (atkarībā no dažādiem PA)
- Pārraides jauda: 0.5W~20W optional
Satura rādītājs
iesniegums
Šis produkts galvenokārt tiek izmantots sabiedrības drošības un drošības inspekcijas departamentu tehniskajā izlūkošanā un pierādījumu vākšanā, bezpilota lidaparātu attēlu pārraide reāllaikā, bezpilota kuģi, radio un televīzijas relejs, radio un televīzijas tiešraides: apraides lauks, sporta raidījums, sociālā ziņas, gaiss tiešraidē, studija, alpīnisma ekspedīcija, un citi aspekti. Tas ir piemērots augstas kvalitātes attēlu reāllaikā mobilai pārraidei dažādās sarežģītās vidēs, piemēram, pilsētās, jūras, un kalni.
Raidītāja specifikācija
modulācijas metode | COFDM |
darba spriegums | DC11V ~ DC13V |
darba strāva | 0.5 Vati: ≤0,6A DC12V, 1 Vati: ≤0,8A DC12V, 2 Vati: ≤1.5A DC12V 5 Vati: ≤3,0A DC12V 10 Vati: ≤5.0A DC12V 20 Vati: ≤7.0A DC12V |
vadības saskarne | standarta RS232 saskarne, 8 Datu biti, 1 Stop Bit, Paritātes bits, Pārraides ātrumu: 19200 |
pārredzama datu saskarne, | vienvirziena pārredzama seriālā porta pārraide, 8 Datu biti, 1 Stop Bit, atbalstīt nepāra paritāti, Paritātes bits, Bezvadu paritāte, Pārraides ātrumu: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
šifrēšanas metodes | atbalsta 128 bitu šifrēšanu |
modulācijas kartēšana | QPSK (4QAM), 16QAM, 64QAM |
uz priekšu kļūdu labojums | 1/2 2/3 3/4 5/6 7/ 8 |
Guard intervāls | 1/32 1/16 1/8 1/4 |
Pārvadātāja numurs | 2K |
Frekvenču joslas platums | 2 / 3 / 4 / 5 / 6 / 7 / 8M Pielāgojams |
pārraides koda straume | 2000kbs ~ 20000kbs Regulējams |
pārraides jaudu | 0.5 / 1 / 2 / 5 / 10 Vati |
pārraides frekvence | Pielāgojama jebkura frekvence, Solis 1MHz |
spēka līdzenums | 10 MHz frekvenču joslā, kas lielāka par 0,2 dB |
pleca attiecība | izejas jauda 27dB, plecu attiecība ir labāka par -30dB |
otrā harmonika | ≤-45dB |
VAIRĀK | 32Db |
ievades video | 720×480 60es(NTSC), 720×576 50es(PAL), 720 50P, 720 60P, 1080 50es, 1080 60es, 1080 24P, 1080 25P, 1080 30P, 1080 50P, dažādi režīmi ir adaptīvi. |
HD interfeiss | HDMI, SDI nav obligāts |
video kodēšanas formāts | H.264 |
aizsardzības standarts | pilnīgi alumīnija radiatora tipa šasija, pretkorozijas, triecienizturīgs dizains |
Kopumā izmērs | 9 x 6.4 x 2.3 cm |
Kopējais svars | ≤0,20KG |
Uztvērēja specifikācija
Machine Rack uzstādīti daudzjoslu HD uztvērēja parametri | |
Saņemt frekvences diapazonu | 170-860MHz VHF&UHF |
frekvenču joslas platums | 2/3/4/5/6/7/8MHz, fakultatīvs |
RF ieejas līmenis | -94dBm ~ -15dBm (8M joslas platums)/-98dBm ~ -15dBm (2M joslas platums) |
RF input impedance | 50 omi |
RF ieejas savienotājs | N-galva |
demodulācijas režīms | COFDM |
zvaigznāja režīms | QPSK, 16QAM, 64QAM (fakultatīvs) |
uz priekšu kļūdu labojums | 1/2, 2/3, 3/4, 5 /6,7/8 (fakultatīvs) |
pārvadātāja numurs | 2k, |
aizsargs intervāls | 1/32, 1/16, 1/8, 1/4 (fakultatīvs) |
video dekodēšana | MPEG-2MP@ML/H.264 |
malu attiecība | 4: 3 16: 9 |
video attēls ir | 720 * 576 @ 8MHz 1080P @ 60P |
audio izvades režīms | stereo nesabalansēts 300 / 200mv |
audio izeja | output2Audio + 2Video izeja |
darba spriegums | AC220V / DC12V <0.5A |
Darbības temperatūra | – 20℃ ~ + 50 ℃ |
Izskata lielums | 480*260*45 (1U) šasija |
aprīkojuma svars | 1.5Kilograms (divvirzienu valoda 2,5 kg) |
Piezīme: noklusējuma savienotājs ir HDMI, ja jums ir nepieciešams lētāks modelis, savienotājs CVBS dzeltenajam video savienotājam 720p HDMI, lūdzu Pārbaudiet šeit citam modelim.
apraksts:
– Šajā ierīcē tiek izmantota COFDM tehnoloģija, kas integrē pārraides antenu, digitālā modulācija, audio, un video funkcija.
– Kompakts izmērs, neliels karstums, un ilgs pārraides diapazons
– savietojams ar nelielu kameru, varētu iespējot HD attēlu uzņemšanu un pārsūtīšanu
– pārraides diapazons būs garāks, ja tiks izmantota liela pastiprinājuma antena
– Pārraides diapazons: 5000m (bez pārtraukuma)/500M ar šķēršļiem pārtrauc
iespējas:
– Kompakts izmērs, modulācijas dizains
– Pieņem COFDM modulācijas tehnoloģiju, MPEG-2 attēlu saspiešanas tehnoloģija
– Daudzvirzienu komunikācija
– ātrgaitas sakari nodrošina reāllaika audio un video pārraidi
– Alumīnija korpuss, kas ir triecienizturīgs
– NLOS pārraide
specifikācija:
raidītājs:
– Izmērs:90x64x23mm
– svars:200g
– antena:22mm
Saņēmējs
– Izmērs: 87x70x20mm
– svars:200g
– Antenas augstums:42.5cm (varētu būt saliekts)
Tehniskā specifikācija
– modulācija: COFDM
– darba spriegums: DC11V-DC13V
– Darba strāva:0.5W: mazāks par 0,6A @ DC12V
– vadības ports: standrad RS232 ports. 8-bitu datu biti, 1-bit stop bit, Pārraides ātrumu:19200, atbalsta nepāra paritātes pārbaudi
– pārraides datu ports:8 bitu datu biti,1 bit stop bit, Pārraides ātrumu,1200,2400,4800,9600,19200,38400,57600,115200,230400
– šifrēšana: atbalsts 128 šifrēšana
– modulācija kartēšana: QPSK (4QAM),16QAM,64QQAM
– Forward kļūdu labojums: 1/2,2/3,3/4,5/6,7/8
– Aizsargājiet intervālu: 1/32,1/16,1/8,1/4
– Pārvadātāja numurs:2K
– Frekvenču joslas platums:2/3/4/5/6/7/8M regulējams
– transporta plūsma:2000kbs-20000kbs regulējams
– pārraides jauda: 2W
– pārraides frekvence: varētu pielāgot, solis ir 1Mhz
– jaudas līdzenums: mazāk nekā 0,2 dB 10Mhz robežās
– Otrais harmonisko: mazāks par -45db
– VAIRĀK:32db
– ievades video:1Vp-p,75oms
– Video programmas formāts: MPEG-2
– Video kvalitāte: 720×576 kad virs 4M
– formāts: Var iestatīt NTSC un PAL
Uztvērēja tehniskā specifikācija:
– Uztvērēja frekvenču diapazons: 170-860Mhz, VHF un UHF
– Frekvenču joslas platums: 2/3/4/5/6/7/8 Mhz, regulējams
– RF ieejas līmenis:-94dBm-0dbm pie 8M / -98dbm-0dbm pie 2M
– RF input impedance: 50oms
– RF ieejas ports: High School
– modulācija: COFDM
– Zvaigznāju veids: QPSK,16QAM,64QAM nav obligāts
– Forward kļūdu labojums: 1/2,2/3,3/4,5/6,7/8 fakultatīvs
– Pārvadātāja numurs:2K
– Aizsardzības plaisa:1/32,1/16,1/8,1/4
– Ekrāna ātrums:4:3,16:9
– video attēls:720×576 @ 6Mhz
– Audio un video izvades ports: standarts 3.5 osta
– darba spriegums: DC12V 0.3A
Komplektā ietilpst:
– 1 x raidītājs
– 1 x uztvērējs
– 1 komplektā x piederumi
30Km long distance COFDM HDMI Wireless Video Transmitter
Bieži uzdotie jautājumi
jautājums 1: Man ir nepieciešams vismaz 30 km attālums no gaisa līdz zemei UAV UGV USV.
atbilde 1:Mūsu sistēma to atbalsta, tam vajadzētu izmantot 2W jaudas pastiprinātāju, labāk ir izmantot speciālo garo raidītāja antenu un divas augstākas uztvērēja antenas.
COFDM-912T VS COFDM-908T
jautājums 2: Cik tālu es varu nokļūt, ja izmantoju raidītāju un uztvērēju gan uz zemes?
atbilde: Izmantošanai uz zemes, raidītājam un uztvērējam ir jābūt noteiktai augstuma starpībai, lai pārraidītu lielos attālumos.
Garākā distance ir tikai 2.5 kilometrus, ja gan raidītājs, gan uztvērējs atrodas vienādā augstumā uz zemes. Lūdzu, skatiet mūsu testa video; jo raidītājs un uztvērējs ir novietoti dažādos līmeņos, viena puse ir pie kalna, otra puse ir jūrmalā, pārraidīšanai izmantojām noklusējuma divus vatus 27 kilometri.
jautājums 3: Vai tas atbalsta darba vidi -20 grādi?
atbilde: jā, atbalsta
jautājums 4: I want to buy modules and built-in my devices, please tell me the dimension of that modules.
atbilde: SD model: 6X7X1.6cm, HD model: 5X7X1.6cm
jautājums 5:Do you have any special case shells for marine use?
atbilde: jā, Lūdzu, pārbaudiet zemāk redzamo attēlu. (For the transmitter with a three-proof shell, ūdensdrošs, triecienizturīgs, anti-salt spray, 防水,防震,防盐雾)
Precautions for order customization
- Biežums: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- Antena garums: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 vai 1.8 meters optional)
- Antenna type:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.
FAQ
Q. What is the video resolution?
A: HDMI 1080p.
Q. Does the transmitter power current is high?
A: Priekš raidītājs, the different PA (jaudas pastiprinātājs) iekšā, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
Priekš Saņēmējs, the current is only 0.3A (300mA)
Q: Like we only need 10km, how much PA is recommended?
A: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 kilometri. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
A: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
A: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610Mhz).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
A:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
A: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
Piemēram, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, utt.
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 skaitītāji.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
PA | THE | NLOS |
500mW | >10Km | <300m |
1W | >30Km | <500m |
5W | >60Km | <1500m |
20W | >120km | <3000m |
50W | >200Km | <5000m |
100W | >250Km | <10Km |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50P. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. Piemēram, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 stundas.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Because COFDM is a one-way transmission, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. That is to say, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- jā, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
- jā, we can build the transmission of telemetry and video in COFDM-908T.
- Pirmkārt, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 vati. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Here are some correspondences between the output power and the dBm parameters displayed by the instrument.
- 20mW is 13dBm
200mW is 23dBm
1 Watts is 30dBm
2 Watts is 33dBm
5 Watts is 37dBm
10 Watts is 40dBm
20 Watts is 43dBm
50 Watts is 47dBm
100 Watts is 50dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
jā, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080Frekvenču joslas, 1080Frekvenču joslas
šobrīd, it does not support 1080i, nor does it support 4K transmission.
Joprojām ir jautājums?
Lūdzu, sazinieties ar mums, lai iegūtu vairāk informācijas.
Nosūtiet savu jautājumu
20km virs jūras HDMI bezvadu video raidītāja un uztvērēja pārbaude laivai vai no krasta līdz kuģim
Long-range 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply
Atsauksmes
Nav atsauksmes.