wireless video radio ip mesh transceiver

Do you know if there is any software or tool available that I can use to transmit video through the radio?

Our wireless video radio is like an invisible net cable to connect two IP devices. Pavyzdžiui, please connect to your ip camera on the radio rj45 (siųstuvas), and PC to connect to another radio (imtuvas).
Every ip camera has an ip address, then you use the IP camera player to watch the video on the computer.

A Client sent us a video and asked the wireless video radio IP MESH transceiver about the frequency range and if it supports a frequency hopping function.

Labas, I am transmitting data between the radios and managed to change settings to 20dBm [30 dBm] galia.
I am currently transmitting and receiving an MP4 video between two computers and it is successful.
But, we have a problem with the frequencies of the data transfer. We used a spectrum analyzer to check the frequency we were using, but the spectrum analyzer showed that the frequency was all over the place.
May I get your help to know if the radio is by any chance frequency hopping/ changing dynamically? Why the radio is transmitted at different frequencies?

Here is the reply from our engineer.

This is the system self-test import frequency point. When no transmission signal or data is received, it will always self-check the search status.
When the transmission signal and data are received, the frequency waveform will be normal.

Application of the wireless video, radio ip mesh transceiver

I want to explain our working scenario. Two drones will be in the air with an HD camera and one modem will be on the ground connected to the display. The modem in the air will send videos from the air to the ground + some more useful information. They will also receive some camera control and PTT commands from the ground.
A modem on the ground will receive videos from the air, display them on some LCD, or send them on ethernet. It will also send camera control + PTT commands to drones in the air.