IP MESH Ad Hoc тармак колдонуучу колдонмосу
IP MESH Ad Hoc тармак колдонуучу колдонмосу
Version number: iVcan-20230606
Мазмуну
Brief introduction
- Our Ad hoc network communication radio station, as a mobile self-organizing network, supports any network topology.
- Салттуу зымсыз тармактардан айырмаланып, it is a wireless broadband system with no center, таркатылды, мульти-хоп реле, динамикалык багыттоо, strong invulnerability, and good scalability.
- Some routing protocols complete the wireless communication between nodes through wireless multi-hop forwarding.
- An ad hoc distributed broadband wireless network transmission system with an efficient MAC layer transmission protocol and a two-layer routing protocol.
- All nodes are completely equal, without any infrastructure, and can quickly build a dedicated self-organizing network between mobile nodes, provide instant adaptive communication, have excellent broadband performance, and support the real-time transmission of multimedia information such as video coding and audio coding.
- The system technology has the advantages of strong anti-interference ability, high spectrum efficiency, узак берүү аралык, anti-fading ability, жана күчтүү дифракция жөндөмдүүлүгү.
- Ал татаал жана көзгө көрүнбөгөн шарттарда реалдуу убакытта жана жогорку сапаттагы зымсыз эки тараптуу маалыматтарды берүү функцияларын ишке ашыра алат..
Technical Features
- Борбордук станцияны жана татаал система конфигурациясын орнотуунун кереги жок. Сайт күйгүзүлгөндөн кийин, it will automatically form a network, жана байланышты баштоого болот “секунд”;
- Ыктыярдуу топология, мульти-хоп реле, реле багыттоо;
- Ар бир түйүндүн логикалык атрибуттары ийкемдүү конфигурацияланышы мүмкүн;
- Азыркы учурда, ошол эле жыштык тармагы ≥32 түйүндөрдүн өз ара байланышын колдой алат;
- Канал AES менен шифрленген;
- Системанын маалымат өткөрүү жөндөмдүүлүгүнүн эң жогорку мааниси 90 Мбит/сек;
- Күчтүү каршы кийлигишүү жөндөмдүүлүгү, high spectrum efficiency, узак берүү аралык, кийлигишүүгө каршы
- Күчтүү түшүү жөндөмдүүлүгү жана дифракция жөндөмдүүлүгү
Техникалык параметрлер
- Байланыш жыштыгы: 1412~1452MHz, adjustable in 5MHz steps;
- Өткөрүү күчү: 2*30дБм (2*1W), 1dBm step adjustable。
- Өткөөл режими: 5 / 10 / 20 MHz;
- Интикал ыкмасы: көп ташуучу TDD-COFDM;
- Ташуучу модуляция: BPSK/QPSK/16QAM/64QAM (адаптивдүү же туруктуу);
- сезимталдыкты алуу: -98дБм @ 10MHz;
- Байланыш аралык: 30км (жер-аба/аба-аба көрүү сызыгы), 8км (жер-жер сызыгы);
- Байланыш ылдамдыгы: peak 90Mbps (адаптивдүү);
- Өткөрүү кечигүү: Single jump about 2ms；
- Мульти-хоп мүмкүнчүлүгү: чейин 8 видео секирүү;
- Start time: ≤25S;
- Тармакка кирүү убактысы: азыраак 1 экинчи;
- Маршруттук которуу: азыраак 1 экинчи;
- берилиштер Interface: network port x 2, RS232 x 2;
- энергия керектөөнү: 2~8W
- Protection level: IP65;
- Иштөө температурасы: -40~ + 70 ℃;
- Өлчөмү: узундугу: 72.8mm*width 47.3mm*height 17.9mm
- салмак: 78г
Software operation Instructions
Support 5M, 10M, and 20M bandwidth, real-time graphical interface display, real-time map indication, жана башкалар.
The software disables DHCP by default, and the default IP address is 192.168.17.1 If you forget the address, please connect the 9th pin of the 26PIN cable to the ground to reset the parameters.
Enter the IP address of the module in the browser, and the default username and password are both admin. It takes about 20s for the module to connect to the network from power-on. The recommended browser is Chrome.
After entering, it defaults to simple mode, click expert mode to unlock more settings, suitable for professional debugging.
Status section:
жалпы көрүнүш:
Topology map: (automatic refresh is turned off by default to save bandwidth, you can check automatic refresh)
Check only the display path, you can know the direct jump point relationship of each module
Check the details to judge the data connection status of each module. These are displayed dynamically in real time
Click Details: You can know the specific situation of each module directly:
Terminal state:
Ad hoc network: You can remark the name, албетте, it can also be operated in the terminal state.
Спектр сканерлөө: Check the interference of each frequency band. Албетте, the frequency bands of different modules are purchased, and the scanning frequency bands are different.
Map: (Албетте, to know the location information of each terminal, GNSS modules such as GPS or Beidou need to be installed)
Support tile maps, image maps, network maps, жана башкалар.
Configuration section
режими: 1. MESH node or bridge configuration
2. Wireless configuration:
2.1 Transmission power configuration, the power of different products purchased is different.
Channel жөндөмдүүлүгү: 5M 10M 20M 40M
канал: Different channels are used to purchase different products
The coverage distance (метр) needs to be filled in according to the actual situation. If it is set to 3000 метр, it is impossible to actually run to 5000 метр.
Number of Antennas 2
Fixed MCS rate: Can be set to off for automatic selection. If you want stable transmission, it is recommended to set the manual, диапазон (MCS0 to MCS15)
жөндөмдүүлүгү, модулдоо, Rate
Limit MCS rate: It is recommended to enable it. After enabling it, if the fixed rate is MCS4, the software will automatically select the best modulation method from MCS0 to MCS4 during the test.
| 5M | 10M | 20M | 40M | ||
| MCS0 | BPSK 1/2 | 1.7M | 3.3м | 6.5M | 13.5M |
| MCS1 | QPSK 1/2 | 3.2м | 6.5M | 13м | 27м |
| MCS2 | QPSK 3/4 | 4.8м | 9.8м | 19.5M | 40.5M |
| MCS3 | 16кома 1/2 | 6.5M | 13м | 26M | 54M |
| MCS4 | 16кома 3/4 | 9.7M | 19.5M | 39M | 81M |
| MCS5 | 64кома 2/3 | 13м | 26M | 52м | 108M |
| MCS6 | 64кома 3/4 | 14.5M | 29M | 58.5M | 121M |
| MCS7 | 64кома 5/6 | 16M | 32.5M | 65м | 135M |
| MCS8 | BPSK 1/2 | 3.2м | 6.5M | 13м | 27м |
| MCS9 | QPSK 1/2 | 6.5M | 13м | 26M | 54M |
| MCS10 | QPSK 3/4 | 9.7M | 19.5M | 39M | 81M |
| MCS11 | 16кома 1/2 | 13м | 26M | 52м | 108M |
| MCS12 | 16кома 3/4 | 19.5M | 39M | 78M | 162M |
| MCS13 | 64кома 2/3 | 26M | 52м | 104M | 216M |
| MCS14 | 64кома 3/4 | 29M | 58.5M | 117M | 243M |
| MCS15 | 64кома 5/6 | 32.5M | 65м | 130M | 270M |
From MCS0 to MCS7, two wireless ports send the same data in order to improve stability during the movement.
From MCS8 to MCS15, the two wireless ports send different data, which can make the rate X2
If it is in a mobile state, it is recommended to use BPSK or QPSK to transmit data. 16QAM and 64QAM are suitable for use with fixed transmission.
If MCS8 to MCS15 is used, it is recommended that the antennas of the two ports be 90 degrees from each other, Мисалы, one is vertical and the other is horizontal.
If drones are used, MCS0 to MCS2 is recommended.
The greater the bandwidth, the lower the sensitivity. The same goes for modulation.
above rate unit bps
3. Network:
4. User management:
5. система
6. Tools Configure serial port, GPS/Beidou/GNSS, 4G/5G access, and other parameters
6.1 Multi-device management, in the upper right corner, you can log in and manage users remotely, and it is also a real-time dynamic interface display or map display.
6.2 Serial port software settings:
Select Expert Mode, Tools, and UART Interface.
choose new
Көңүл буруңуз, if you use the serial port to transmit serial data, you have to choose ttyS0 (COM1 of hardware) and ttyUSB0 (COM2 of hardware), ttyATH0 is invalid, режими: network
берүү ылдамдык бирдиги 115200, бирдиктүү бит 1, parity none.
ысым 1, protocol UDP, IP address, 192.168.55.100 (the IP address here is the IP address of the other device, Мисалы, input the IP of the computer for the computer, and input the IP of the device for the device).
порт 20005, 20003. Choose a port number
The computer’s IP is set to a fixed 192.168.17.100
Short the TX RX pins of COM1 and COM2 of the device.
Use the TCP UDP test tool to fill in the IP and port of the device.
Send it to loop back the data.