30-Veguhezkera vîdyoyê ya bêtêl a millisecond Drone UAV HDMI
Ji bo Kamera Drone Vcan1729 Derengiya pir kêm 30~40 milîsaniye
Derengiya veguhezkar û wergirê COFDM-ya birêkûpêk e 200-300 mîlîçirkeyan.
Vê pergala veguhezkar û wergirê vîdyoyê ya bêtêl xwedan demek dereng ji kêmtir e 30 mîlîçirkeyan.
Tabloya naverokê
Taybetî
- gelekî yekpare, sêwirana hevgirtî ya moduler
- Teknolojiya modulasyona COFDM-ê bipejirînin
- Teknolojiya berhevkirina vîdyoyê ya li ser bingeha FPGA H.265
- Derengiya vîdyoyê ya ultra-kêm (derengiya pergala veguheztinê kêmtir ji 30 mîlîçirkeyan)
- All-dora ragihandinê, avakirina dîwar ditirsim ne
- Ragihandina nav-rêwîtiyê ya bilez,
- Doza aluminiumê ya bi germbûna germê, şokê-delîl û bandor-berxwedan
- Non-line-ji-ber çavên (NLOS) veguhastina mobîl, bi dûrahiya ne kêmtir ji 20 kîlometre di bin şert û mercên çavan de
- Leza tevgera herî zêde dikare bigihîje 600Km / saet (pîvandin)
- Xweseriya tevahî heye
Bikaranînî
- Ew ji bo dronên ku bi leza bilind difirin û kalîteya vîdyoyê ya 1080P hewce dike tê bikar anîn.
- Ev hilber bi giranî ji hêla beşên teftîşa ewlehiya giştî û ewlehiyê ve ji bo vedîtina teknîkî û edlî hate bikar anîn.
- Di weşanê de weşanên zindî yên radyo û televîzyonê hene, weşanên sporê, news civakî, û hîn.
- Ew ji bo veguheztina mobîl-a-dema rast a wêneyên kalîteya bilind li bajaran maqûl e, gol, çîya, û derdorên din ên tevlihev.
Specification
UAV HDMI Veguhezkara Vîdyoyê ya Wireless
Modulation Mode | COFDM |
Voltage Xebatê | DC11V~DC18V |
Current Xebatê | 1 Watts PA:≤1.7A DC12V; 2-Watts PA: ≤2.3A DC12V; 5-Watts PA: ≤3.0A DC12V |
Navrûya Kontrolê | Navrûya standard RS232, 8 Bits Daneyên, 1 Bit rawestin, Tewra wekhevî, Baud Rate: 19200 |
Navbera Daneyên Zehf | Veguheztina porta serial a yekalî ya zelal, 8 bits welat, 1 stop bit, piştgiriya dixûyê hûrik, heta dixûyê, parity wireless, rêjeya baud: 1200, 2400, 4800, 9600, 19200, 38400, 57600,230400 |
Method Şîfrekirin | 128-bit şîfrekirina AES |
Nexşeya Modulasyonê | QPSK (4QAM), 16QAM, 64QAM |
Serastkirina Çewtiya Pêşî | 1/2 2/3 3/4 5/6 7/8 |
Nobedarên Navber | 1/32 1/16 1/8 1/4 |
Hejmara hilgir | 2K |
Bandwidth Frequency | 2/3/4/5/6/7/8M lihevhatî |
Transmission Code Stream | 2000kbs~20000kbs verastkirin |
Amplifier Power Transmission | 1 Watts, 2 Watts, 5 Watts, 10 Watts, 20 Watts (Em dikarin ji bo we xweş bikin) |
Frequency Transmission | dikare li her frekansê were xweş kirin, frekansa dikare bi berdewamî were sererast kirin, gav 1MHz e |
Hêza Flatness | kêmtir ji 0,2dB di band 10MHz |
Rêjeya Milê Band | rêjeyê ji -30dB çêtir e dema ku hêza hilberînê 36dB be |
Duyemîn-Harmonîk | kêmtir ji -60Db |
MORE | 32Db |
Video | 720 50P, 720 60P, 1080 24P, 1080 25P, 1080 30P, 1080 50P, 1080 60P |
Input-Pênase Bilind | HDMI 1080p |
Forma Kodkirina Vîdyoyê | FPGA-based H.265 kodkirina nerm |
Derengxistin | derengiya pergala veguheztinê ji 30 ms kêmtir, dawî-bi-dawî dereng |
Hesinî | kêmtirîn, Dij-korozyonê, sêwirana dijî-vibrasyonê |
Ebat | 95*75*45mm |
Pîvan | 0.248kg |
UAV HDMI Wireless Video Receiver
- Dema ku guheztina jorîn li PC-yê vedigere, Daneyên porta serial ji sorê derveyî derdikeve, spî, û girêdana sê-wire reş, ku dikare bi komputerê ve girêdayî ye; dema ku ew vedigere LCD, daneyên port serial ji bo ekrana LCD ya li ser wergirê derdixe.
- The toggle switch below is the power switch for the LCD screen that comes with the receiver.
ion mode | QPSK, 16QAM, 64QAM (bixwe) |
Çewtî pêş | 1/2, 2/3, 3/4, 5/6, 7/8 (bixwe) |
hejmara hilgirên | 2k, |
interval cerdevan | 1/32, 1/16, 1/8, 1/4 (bixwe) |
Decoding Video | H.265 |
rêjeya alî | 4:3 16:9 |
wêneyê vîdyoyê | 1080P@60P, 50P, 50ez, 30P, |
voltaja xebatê | AC220V/DC12V <0.9YEK |
Germahiya kar | -20℃ ~ + 50 |
Mezinahiya xuyangê | 480*260* 45 (1U şase) |
Device Weight | 0.466kg |
Perçê pêva
FAQs
This model is our lowest latency for the drone wireless video transmitter and receiver.
It supports the lowest 28-millisecond latency. (Not including the camera and monitor display time)
COFDM-912T, CVBS RCA 720P Video Input, 200~400 millisecond.
COFDM-908T: input HDMI, 200~300 millisecond.
Vcan1729: input HDMI, 20~40 millisecond. suitable for drone.
Ew 1729 model is ultra-low latency, which is very suitable for drones. It can detect obstacles in time, such as houses, trees, wires, hwd., and avoid them in the shortest time. Many drone factories in China have adopted this video transceiver system.
- Please note that this transmitter only supports HDMI 1080P or 720P input, it does not support HDMI1080i or 720i input.
- In order to decrease the latency delay, the HDMI is not including the Audio signal. Please tell me if you need it, We will make a special firmware for your order, but the latency delay will be longer than HDMI only have video signal.
- Please also note that for the HDMI used by the drone camera, please use extremely thin and anti-interference HDMI cables. Ordinary household HDMI or cheap HDMI cables may cause unexpected failures.
-
What's the distinction between 1080p and 1080i?The two display systems (1080p û 1080i) can both display 1920x1080 pixel images, although they do so in different ways. The letters "ez" û "p" refer to the manner in which the images are displayed. 1080i stands for "interlaced scan" and 1080p is for "progressive scan."
How to connect Vcan1729, HDMI Wireless Video Transmitter and Receiver
- Please connect the antenna first before you power on the transmitter and receiver, otherwise the Power Amplifier inside is easy to be burned.
- The parameter configuration board tool does not need to connect when you are testing.
- The power supply of the transmitter and receiver is better to use 12V 3A.
- There is two long receiver antennae and one short antenna for the transmitter. Although you do not need our transmitter antenna, please ensure that the transmitter antenna covers the frequency of 595Mhz. 595Mhz is the center working frequency.
- In the package, there is one HDMI. It is high-quality HDMI cable for drone or robot use.
- On the receiver, there are two switches on the side. (at the first time to test, please don’t move the switch and no need connect the UART cable to other devices)
PC-LCD: UART cable operate from the computer or LCD on the receiver, there is one LCD menu. If you put the CTRL switch on the LCD side, then the receiver parameter can be adjustable by menu, if you put the CTRL switch on the PC side, then the receiver parameter can be adjustable by computer, you need connect the UART cable to the computer.
LCD power: JI / li, it can power on or off the small screen on the receiver, after change the receiver parameter, maybe you want to power off the screen displayer to save the power
- For testing, just connect the two receiver antenna on the RF1 and RF2, HDMI ji monitora xweya HDMI re derdixe û di 12V de hêzê dide
- For testing, tenê yek transmitterê li ser RF-ê girêdin, Kabloya HDMI ku bi kameraya xweya HDMI ve girêdayî ye, û wê hêzê li 12V bidin.
- Ger pirsek we hebe ji kerema xwe bi me re têkilî daynin, an jî wêne an vîdyoyê nîşanî me bidin, em ê agahdariya bêtir pêşkêşî we bikin.
Manual Bikarhêner
Mezinahiya pakkirinê:127*27*12CM
Pîvan:8.5KG