6110MHZ-7210MHz 6-7 GHZ FPV VTX 3 와트 전력 증폭기 또는 6.1-7.2GHz 5WPA 송신기

56110MHZ-7210MHz 6-7 GHZ FPV VTX 3 Watts Power Amplifier 6.1-7.2GHz 5WPA Transmitter

모습

치수

사양

1. 7.2 GHz의, 64 주파수 포인트: 6110 메가 헤르츠 – 7210 메가 헤르츠;
2. 최대 전력: 5W (25mW/1000mW/5000mW, 조절할 수 있는);
3. 입력 전압: DC 15V-36V, supports 2-8S battery input 4. 안테나 인터페이스: SMA female socket 5. Communication protocol: IRC 트램프
4. Heat dissipation method: aluminum alloy heat sink + 팬
5. Mounting hole: 20mm*20mm /ø2mm
6. 제품 크기: 53밀리미터 x 28.85mm x 16mm
7. 상품 무게: 25.85지

Interface and button LED layout

1. Frequency indicator: 빨간색 LED
2. Band indicator: 파란색 LED
3. 전원 표시기: 녹색 LED
4. Band and frequency adjustment button
5. Power adjustment button
6. 1.0 6P cable holder
7. SMA female antenna socket

Button Control Method and LED Indicator Definition

Button ④ switches between frequency points and frequency bands. Each time you briefly press button ④, the corresponding red LED will flash, switching from one frequency point to the next. This cycle repeats; see the figure below for details.

	CH1	CH2	CH3	CH4	CH5	CH6	CH7	CH8
빨간색 LED	깜박거리다 1 시각	깜박거리다 2 시각	깜박거리다 3 시각	깜박거리다 4 시각	깜박거리다 5 시각	깜박거리다 6 시각	깜박거리다 7 시각	깜박거리다 8 시각

Press and hold button ④ to switch frequency bands. Press and hold for 5 seconds and the corresponding blue LED will flash.

Frequency group A.B.E.F.R.P.H.U. This operation can be cyclic; see the figure below for details!

	깜박거리다 1 시각	깜박거리다 2 시각	깜박거리다 3 시각	깜박거리다 4 시각	깜박거리다 5 시각	깜박거리다 6 시각	깜박거리다 7 시각	깜박거리다 8 시각
파란색 LED	에이	비	이자형	에프	아르 자형	피	H	유

Button ⑤ is the power adjustment button. Each short press cycles through the three power settings: 25mW의, 1000mW의, 그리고 3000mW. The green LED is the power indicator, 아래 그림과 같이: 25mW flashes once, 1000mW flashes twice, and 3000mW flashes three times. Press and hold for 3 seconds to enter pit mode, where the green light remains on. See the figure below for details.

	Constantly on	깜박거리다 1 타임스	깜박거리다 2 타임스	깜박거리다 3 타임스
Green Led	피트 모드	25mW의	1000mW의	3000mW의

노트: This video / image transmitter has a temperature protection function. When the temperature of the image transmitter is higher than 100℃,, the image transmission power will be reduced by one level. If the temperature is still higher than 100When the temperature drops to 95℃, the transmit power will return to the originally set power level.

Channel Corresponding Parameter Table

6피 1.0 Cable Interface Definition

Precautions for use

1. When installing the image transmission module, be sure to leave enough space around it to ensure adequate air circulation and heat dissipation. 그렇지 않으면, the module’s overheat protection will activate, reducing or even shutting down the transmission power.
2. Before connecting the power cord, ensure the correct voltage range and polarity to avoid damaging the components.
3. Before connecting the power supply, it is recommended to ensure that the antenna is installed at the RF output terminal to extend the service life of the module.
4. Please read the instructions before use to ensure correct wiring and extend the service life of the module.

Customizable Items for FPV VTX:

• 주파수 범위 – Adjustable working bands (for example 1.2GHz / 2.4GHz의 / 5.8GHz의 / 6.7GHz의, 7.2GHz의) to meet regional regulations or application needs.

• 출력 파워 – Different RF power levels (25mW의, 200mW의, 600mW의, 1W, 2W, 3W, 5W, 기타) for short- or long-distance transmission.

• 변조 유형 – Analog or Digital (COFDM, DVB-T, custom protocols).

• 비디오 인터페이스 - HDMI, SDI, CVBS, or IP stream input.

• Audio/Data Channel – Additional audio input or telemetry data channel.

• 폼 팩터 & 크기 – Board type, enclosed module, or lightweight compact version for UAVs and drones.

• 전원 공급 장치 범위 – Wide voltage input (예를 들어, 7–24V, 12V, 28V) depending on system requirements.

• 안테나 커넥터 – Custom RF connectors such as SMA, RP-SMA, MMCX, or custom cable.

• 암호화 – Optional AES or proprietary encryption for secure transmission.

• 냉각 방법 – Passive heatsink or active fan cooling depending on power output.

• 채널 번호 & 스위칭 – Fixed channels, 딥스위치, or software control for frequency selection.

• 주택 & 보호 - 방수, 방진, or ruggedized case for outdoor/military use.

• 심벌 마크 & 펌웨어 – OEM/ODM branding and firmware customization.

사용 설명서

VTX: 7.2G 5W VTX 매뉴얼

VRX: 6G7 64CH VRX 박스

갱도

자주하는 질문

1. What is the frequency range of the 6110MHz-7210MHz FPV VTX 5W Power Amplifier?
The amplifier operates in the 6110MHz–7210MHz range, covering the 6–7 GHz FPV frequency band, 헌금 64 선택 가능한 채널.

2. How much output power does this FPV VTX amplifier provide?
It supports three adjustable power levels: 25mW의, 1000mW의, and up to 5000mW (5W) maximum output.

3. Can I adjust the transmission power of this 6-7 GHZ FPV VTX?
예, the power amplifier allows switching between 25mW, 1000mW의, and 5000mW via the control button.

4. What type of antenna connector does this FPV VTX power amplifier use?
It uses a standard SMA 여성 커넥터, 대부분의 FPV 안테나와 호환 가능.

5. 는 6-7 GHz FPV VTX amplifier support pit mode?
예, by holding the power button, it enters pit mode for safe indoor or bench testing.

6. What is the input voltage range for the FPV VTX 3W amplifier?
It accepts DC 15V–36V, 지원 2S–8S LiPo batteries, making it highly versatile.

7. How heavy is the 6110MHz-7210MHz FPV VTX 5W Power Amplifier?
무게 만 있습니다 25.85 그램, making it lightweight for drones and FPV aircraft.

8. What are the physical dimensions of this FPV video transmitter?
크기는입니다 53밀리미터 x 28.85mm x 16mm, compact for mounting on most FPV builds.

9. What cooling system does the 6-7 GHz FPV VTX power amplifier use?
그것은 특징입니다 aluminum alloy heat sink and an active cooling fan for reliable heat dissipation.

10. Does this FPV VTX amplifier have overheating protection?
예, it automatically reduces output power if the temperature exceeds 100°C, and restores when it cools below 95°C.

11. Which communication protocol is supported by the FPV VTX amplifier?
그것은 지원합니다 IRC Tramp protocol for remote control and easy VTX configuration.

12. 이건가? 6-7 GHz FPV transmitter suitable for long-range FPV flights?
예, 최대 3W 출력 전력, it is ideal for long-distance FPV and drone video transmission.

13. How do I change frequency channels on this FPV VTX?
눌러 frequency button to cycle through channels; the red LED blinks to indicate the channel number.

14. How do I switch frequency bands on this FPV VTX 5W power amplifier?
Hold the frequency button ...에 대한 5 초; the blue LED indicates the selected band.

15. How many frequency bands are supported in the 6110-7210MHz FPV VTX?
그것은 지원 8 밴드 (에이, 비, 이자형, 에프, 아르 자형, 피, H, 유) with multiple channel options.

16. How many total channels does the FPV VTX support?
있다 64 주파수 포인트, ensuring flexibility and interference avoidance.

17. Is this FPV VTX amplifier compatible with standard FPV goggles and receivers?
예, 그것은 대부분의 경우에 작동합니다 6-7 GHz FPV receivers that support the same frequency range.

18. Can I use this FPV VTX with digital FPV systems?
It is primarily designed for analog FPV transmission, not digital systems like DJI O3.

19. What is the maximum power consumption of the FPV VTX amplifier?
At full 3W output, it consumes more power, so using a reliable 2S–8S battery is recommended.

20. Does the FPV VTX include an antenna in the package?
보통, the amplifier includes only the module; 호환 6-7 GHz SMA antennas must be purchased separately.

21. How do I know what power level is currently set?
그만큼 green LED flashes: once for 25mW, twice for 1000mW, and three times for 5000mW.

22. What happens if I power the FPV VTX without an antenna?
Operating without an antenna may damage the amplifier; always connect an antenna before powering on.

23. Can the FPV VTX amplifier be mounted on racing drones?
예, with its 20x20mm mounting holes, it is compatible with racing drone frames.

24. Is the FPV VTX amplifier lightweight enough for fixed-wing aircraft?
예, 그것은 26g weight makes it perfect for airplanes, long-range wings, 및 UAV.

25. Can this VTX amplifier be controlled through flight controllers?
예, ~을 통해 IRC Tramp protocol, flight controllers like Betaflight can change VTX settings.

26. What is pit mode in FPV transmitters?
Pit mode reduces output power to near-zero for safe bench testing 간섭없이.

27. Can this 6-7 GHz VTX be used for FPV racing events?
예, with multiple channels and bands, it can be used in multi-pilot FPV events.

28. Is there an LED indicator for each function on the VTX?
예, red for frequency, blue for band, green for power.

29. What type of cable interface does the FPV amplifier use?
It uses a 6-핀 1.0 및 다른 언어를 사용할 수 있습니다 for control and connection.

30. What is the recommended installation method for this FPV VTX?
Mount with adequate airflow, leaving space for cooling and heat dissipation.

31. Can I power this FPV amplifier directly from a drone battery?
예, 그것은 지원합니다 2S to 8S LiPo batteries, making it very convenient.

32. Does this FPV VTX amplifier work in high-temperature environments?
예, but if it exceeds 100°C, 그만큼 power automatically steps down to protect the device.

33. 는 6-7 GHz frequency legal in all countries?
아니, always check your local radio regulations before using this frequency band.

34. Can this FPV transmitter be used for professional UAV video streaming?
예, 와 5W power output, 그것은 적합합니다 long-range UAV and industrial FPV applications.

35. How durable is the aluminum housing?
그만큼 metal heat sink casing improves durability and provides efficient cooling.

36. Can the VTX be used with ground station receivers?
예, as long as the receiver supports 6110–7210MHz frequencies.

37. Does this FPV VTX amplifier come pre-configured?
It ships with default settings, 그러나 당신은 할 수 있습니다 adjust frequency, 밴드, 그리고 힘 manually.

38. How easy is it to change settings on this FPV transmitter?
Very easy – just press the 버튼 and check the LED indicators for feedback.

39. Can I switch bands and channels while flying?
아니, it is not recommended to change the frequency or channel during flight.
When the VTX switches to a different frequency, the video signal will be interrupted for about 1–2 seconds, causing the image to black out or lose signal. The receiver (VRX) cannot automatically follow this change, so the video link will be completely disconnected.

For safety reasons, please set and confirm the correct frequency and channel before takeoff. Changing the frequency is only suitable for ground testing or multi-pilot frequency coordination before flight.

40. What is the minimum safe operating voltage?
The amplifier should not be powered below 15V DC.

41. Does the FPV VTX amplifier support smart audio?
아니, 그것은 지원합니다 IRC Tramp protocol instead of SmartAudio.

42. Can this FPV VTX be used in urban environments?
예, 그것은 high power output helps overcome interference in urban FPV flying.

43. Is the fan noisy during operation?
내장 냉각팬 runs quietly while keeping the amplifier cool.

44. Can this module be used for FPV drones beyond line of sight (단지)?
예, 와 3W 파워, it is capable of 장거리 전송.

45. What precautions should I take before using the FPV VTX amplifier?
Ensure correct wiring, attach the antenna, and provide proper cooling before powering on.

46. Is this FPV VTX waterproof or weatherproof?
아니, avoid exposure to rain or moisture; mount it in a protected area.

47. How reliable is the signal stability at 7 GHz의?
The amplifier provides 강한, stable FPV video transmission even in high-frequency bands.

48. Can the FPV VTX be upgraded with firmware?
현재, 그것은 hardware-based device with no firmware upgrade requirement.

49. Does the amplifier interfere with GPS signals?
아니, operating at 6–7 GHz, it does not interfere with standard GPS bands (1.5 GHz의).

50. Why should I choose the 6110MHz-7210MHz 6-7 GHz FPV VTX 5W amplifier?
Because it offers 고전력, 안정적인 장거리 전송, 효율적인 냉각, multiple frequency options, 최신 FPV 시스템과의 호환성.

51. Do you have the Video Transmitter THOR T67 FPV VTX and Receiver THOR R67 FPV Receiver?
아니, do you agree with this model to replace? Same support 6-7GHz frequency.