1.2G-7.2G Ultra-Wideband FPV Video Receiver VRX 1.2G 1.5G 1.8G 2.8G 3.3G 3.7G 4.2G 3-4G 6-7G
Ultra-wideband FPV receiver covering 1.2G to 7.2GHz for unmatched compatibility and flexibility.
One receiver, endless possibilities—supporting all major FPV bands from 1.2G to 7GHz.
Automatic channel scanning makes fast, reliable signal locking simple and effortless.
목차
개요
이 1.2G-7.2G Ultra-Wideband FPV Video Receiver VRX FPV 레이싱을 위해 설계된 전문가급 초광대역 아날로그 비디오 수신기입니다., 드론 항공 사진, 장거리 원격 모니터링. 광범위한 주파수 범위를 포괄 1.2G to 7.2GHz, 모든 주요 아날로그 비디오 전송 프로토콜을 지원합니다., NTSC 및 PAL 포함. Vcan2165는 자동으로 최상의 신호를 선택합니다., 비디오 노이즈 및 찢어짐 최소화, 안정적인 것을 제공합니다, 취미 사용자와 전문 사용자 모두를 위한 저지연 FPV 경험.
풍모
-
초광대역 범위: 900MHz 지원, 1.2GHz의, 1.3GHz의, 1.5GHz의, 2.4GHz의, 2.8GHz의, 3.3GHz의, 3.7GHz의, 4.2GHz의, 3-4GHz의, 5.8GHz의, 6-7GHz의, 7GHz and other standard or custom frequency bands.
-
높은 감도: 탁월한 수신 성능으로 장거리에서도 안정적인 영상 신호 보장.
-
자동 스캐닝: 범위 내 활성 채널을 감지하는 원버튼 스캔.
-
저지연 비디오: 최적화된 아날로그 처리로 실시간 FPV에 대한 지연을 최소화합니다..
-
사용자 친화적인 인터페이스: LCD 화면에 작동 상태 표시; 탐색 및 채널 선택을 위한 직관적인 버튼.
-
견고함과 신뢰성: 정전기 방지 보호 기능을 갖춘 통풍이 잘되는 환경에서 작동.
명세서
| 매개 변수 | 사양 |
|---|---|
| 주파수 범위 | 500MHz – 8GHz |
| 수신 모드 | 자동 검색 / 고정 채널 |
| 감광도 | -90 dBm의 |
| 수신 거리 | 10m – 50km (안테나와 환경에 따라 다름) |
| 입력 전압 | 12-28V DC |
| 전원 인터페이스 | DC-005 |
| 안테나 인터페이스 | 고등학교 |
| 비디오 출력 | RCA (노랑) |
| 비디오 포맷 | NTSC / 단짝 (자동 감지) |
| 치수 | 90 엑스 92 엑스 24 mm |
| 무게 | 119.5 지 |
버튼 및 인터페이스

LCD 화면: 작동상태를 보여줍니다.
버튼 영역:
· 반환 키: 복귀 동작을 수행하고 고정된 주파수 대역을 빠져나갑니다..
· 확인 키: 동작을 확인하고 주파수 포인트를 잠급니다..
· 위쪽 키: 위쪽으로 이동.
· 아래쪽 키: 아래로 이동.
· 왼쪽 키: 왼쪽으로 이동.
· 오른쪽 키: 오른쪽으로 이동.
사용자 설명서
1. 설치 및 연결
· 해당 안테나를 나사로 고정하십시오. (예를 들어, 7지) 안테나 포트에.
· 12~28V DC 입력을 제공하기 위해 조정된 전원 공급 장치 모듈을 사용합니다..
· 비디오 케이블을 사용하여 RCA 비디오 출력을 디스플레이 장치에 연결합니다..
2. 기본 조작
· 전원 켜기: 전원 공급 장치에 연결되면 수신기 전원이 자동으로 켜집니다..
· 채널 선택:
-
화살표 키를 사용하세요 (쪽으로, 내려가는, 왼쪽, 권리) 주파수 대역을 탐색하고 선택하려면.
-
눌러 입력하다 선택한 주파수를 확인하고 잠그는 키.
-
눌러 뒤 현재 작업을 돌아가거나 종료하는 키.
· 자동 스캔: -
수신기가 근처의 비디오 전송 채널을 자동으로 스캔하도록 하려면 "자동 검색" 모드를 선택하십시오..
-
감지된 각 채널은 해당 비디오를 표시합니다. 5 다음으로 전환하기 몇 초 전.
-
눌러 입력하다 원하는 이미지를 고정하는 키.
회수
| No.\ CH | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 1 | 6110 | 6130 | 6150 | 6170 | 6190 | 6210 | 6230 | 6250 |
| 2 | 6270 | 6290 | 6310 | 6330 | 6350 | 6370 | 6390 | 6410 |
| 3 | 6430 | 6450 | 6470 | 6490 | 6510 | 6530 | 6550 | 6570 |
| 4 | 6590 | 6610 | 6630 | 6650 | 6670 | 6690 | 6710 | 6730 |
| 5 | 6750 | 6770 | 6790 | 6810 | 6830 | 6850 | 6870 | 6890 |
| 6 | 6910 | 6930 | 6950 | 6970 | 6990 | 7010 | 7030 | 7050 |
| 7 | 7070 | 7090 | 7110 | 7130 | 7150 | 7170 | 7190 | 7210 |
| 8 | 6115 | 6265 | 6425 | 6585 | 6745 | 6905 | 7065 | 7185 |
응용 프로그램
-
FPV 레이싱 드론
-
항공 사진 및 비디오그래피
-
원격 모니터링 및 감시
-
드론 연구 및 개발
-
전문 FPV 교육 및 대회
사용자 정의 가능한 옵션
-
주파수 대역: 고객은 5.8GHz 전용 또는 다중 대역 구성과 같은 특정 대역을 선택할 수 있습니다..
-
안테나 유형: 다양한 범위 및 방향 요구사항에 맞게 SMA 안테나와 호환 가능.
-
비디오 출력 형식: 지역 호환성을 위한 NTSC 또는 PAL.
자주하는 질문
Q1: Does the video signal search run continuously in a loop from 500 MHz to 8000 MHz, or do I need to press the search button each time?
A1: 그만큼 광대역 FPV VRX supports continuous auto-scanning. During the search process:
- If a video signal is detected, the VRX display will show a clear video feed.
- To lock onto this frequency, 누르다 세트 단추. Without locking, the receiver will automatically move to the next frequency after 3 초.
- Pressing 세트 again unlocks the current frequency and resumes the automatic scanning process.
- When the scan reaches 8000 MHZ without finding a video signal, it will automatically restart from 500 MHZ, continuously looping through the frequency range.
- The search will keep cycling until a signal is locked manually using the 세트 단추.
This ensures uninterrupted scanning across all bands while giving you control to lock onto any active FPV video channel.
큐: Can I connect an external device (예를 들어, ESP32) to the receiver to read or modify the frequency?
에이: 예, it is technically possible. Some customers have purchased samples and implemented their own custom modifications. 하나, please note that we do not provide technical support for such secondary development. Customers would need to handle this independently.
큐: Does the receiver support frequencies that are not included in the preloaded channel list?
에이: 예. For frequencies outside of the preloaded channel list, the receiver supports automatic scanning within the 500–7300 MHz range.
Q1: 500MHz-8000MHz 8G 초광대역 FPV 비디오 수신기는 어떤 유형의 비디오 신호를 지원합니까??
A1: 표준 아날로그 비디오 형식 NTSC 및 PAL을 지원하고 올바른 형식을 자동으로 감지합니다..
Q2: 장거리에서 드론과 함께 작동할 수 있나요??
A2: 예, 안테나와 환경에 따라, 최대 신호를 수신할 수 있습니다. 50 km.
Q3: 어떤 전원 공급 장치가 필요합니다?
A3: 조정된 12~28V DC 전원이 필요합니다..
Q4: 안테나 없이 장치를 작동해도 안전한가요??
A4: 아니, 손상을 방지하려면 전원을 켜기 전에 항상 안테나가 단단히 연결되어 있는지 확인하십시오..
Q5: 특정 채널을 고정할 수 있나요??
A5: 예, 안정적인 수신을 위해 자동 스캐닝과 수동 채널 잠금이 모두 가능합니다..
Q6: 고온 환경에서 사용할 수 있습니까??
A6: 과열을 방지하기 위해 통풍이 잘되는 환경에서 사용해야 합니다..
Q7: VRX가 6~7GHz 범위 외부의 향후 송신기와 작동할 수 있습니까??
A7: 예. VRX 주파수 범위는 다음과 같습니다. 500–8000MHz, 6~7GHz 대역에 국한되지 않음. 이는 더 넓은 주파수 범위를 지원하는 미래의 송신기가 여전히 당사의 수신기와 호환된다는 것을 의미합니다., 장기적인 업그레이드와 다양한 애플리케이션을 위한 유연성 보장.
큐: 사양에는 수신기가 500~8000MHz에서 작동한다고 명시되어 있습니다., 하지만 제품 설명에는 이 범위의 일부만 표시됩니다.. 전체 주파수 범위를 제공하고 조정 방법을 설명할 수 있습니까??
에이: 예. 수신기는 완벽하게 지원합니다. 500–8000MHz.
-
송신기의 주파수를 모르는 경우:
당신은 사용할 수 있습니다 500–8000MHz 자동 검색 활성 신호를 스캔하고 고정하는 기능. -
송신기의 대략적인 주파수를 이미 알고 있는 경우:
메뉴에 들어가서 가장 가까운 사전 설정된 주파수 대역을 선택할 수 있습니다., 그런 다음 더 빠르고 정확한 튜닝을 위해 해당 대역 내에서 검색을 수행합니다..Available preset Channel options in the menu: 1.2 GHz의, 1.5 GHz의, 1.8 GHz의, 2.8 GHz의, 3.3 GHz의, 3.7 GHz의, 4.2 GHz의, 3-4 GHz의, 6-7 GH
- Check the preset frequency list for each channel.
이러한 사전 설정은 수신기가 전체 500~8000MHz 범위의 올바른 세그먼트에 스캔 초점을 맞추는 데 도움이 됩니다..

큐: 이 500~8000MHz FPV VRX에 리모콘이 포함되어 있나요?? 주파수를 수동으로 입력하여 채널을 검색할 수 있습니다.
에이: 현재, 수동 주파수 입력을 위한 리모콘은 포함되어 있지 않습니다.. 수신기는 일반적으로 사용되는 주파수의 미리 설정된 범위 내에서 채널을 자동으로 스캔합니다.. 먼저 샘플을 테스트해 보세요.. 수동 주파수 입력이 필요한 것을 확인한 경우, 우리는 귀하를 위해 이 기능을 개발할 것이며 채널 검색을 위한 수동 주파수 입력을 지원하도록 장치를 사용자 정의할 수 있습니다..
큐: Does the UWB VRX support automatic frequency hopping between different VTX bands (예컨대. 1.2 GHZ와 3.3 GHz의)?
에이: Although our UWB (초광대역) VRX supports a wide tuning range from 1.2 GHz ~ 7.2 GHz의, 그것은 할 수 있다 only operate on one frequency at a time.
VRX cannot simultaneously receive FPV video signals from VTXs operating on different frequency bands, 등 1.2 GHZ와 3.3 GHz의. When the VTX is working at 1.2 GHz의, the VRX must be tuned or scanned and paired at 1.2 GHz의. If the VTX is switched to 3.3 GHz의, the VRX must also be retuned or rescanned to 3.3 GHz의, and the previous 1.2 GHz link will be disconnected.
따라서, automatic recovery or frequency hopping across different bands is not supported. The VRX supports frequency scanning and tuning within the same band, 하지만 그것 does not support cross-band operation or simultaneous multi-band reception.
큐: What is the gain of the UWB antenna? Is it omni or directional?
에이: The default configuration uses a 지향성 안테나 with a gain of 6 dBi로. You may also use your own antenna. 최적의 성능을 위해, it is recommended to use a narrowband antenna optimized for your target frequency range—for example, antennas designed specifically for 6.1–7.2 GHz can provide lower VSWR and higher gain than a general-purpose UWB antenna.
큐: Do you offer multi-frequency fusion VTX/VRX that combines two signals into one stable image?
에이: 현재, our FPV VTX and VRX systems do not support cross-band operation. Even with a high-power amplifier (예를 들어, 5 W+), 그것은 not possible to achieve 50 km 범위 using analog 1.2 GHz 시스템.
For extended range and stable cross-band operation, we recommend using our digital video transmission solutions. These systems support frequency hopping across bands, 간섭 회피, and can maintain clear image quality and reliable links over distances of 50–200 km.
큐: Can I remotely change the frequency of this FPV drone repeater?
에이: 현재, the frequency must be adjusted manually using the buttons on the receiver and the on-screen parameters. If remote frequency control is required, your software engineer can implement it by reading the frequency-setting commands and connecting a microcontroller. Through a 100-meter Ethernet connection, the frequency adjustment commands can be transmitted remotely, allowing the operator and the remote controller to stay in a safe location while modifying video signal settings.
큐: I want to receive good signal strength from a drone without knowing its exact direction. Can I use an omnidirectional antenna for this purpose?
에이: 현재, there is no single omnidirectional antenna that can cover an extremely wide frequency range from 500 MHz to 8 GHz. To achieve full coverage across the receiver’s frequency range (1.2–7 GHz), engineers recommend using four separate receiver units, each with its own omnidirectional antenna, tuned to different frequency bands.
Recommended Setup:
| 주파수 범위 | 안테나 유형 | 수량 | 대략. 길이 | 일반적인 이득 |
|---|---|---|---|---|
| 1.2 - 1.8 GHz의 | 전 방향 | 1 | 200 mm | 2-3dBi |
| 2.8 - 3.3 GHz의 | 전 방향 | 1 | 150 mm | 2-3dBi |
| 3.7 - 4.2 GHz의 | 전 방향 | 1 | 150 mm | 2-3dBi |
| 6 - 7 GHz의 | 전 방향 | 1 | 150 mm | 2-3dBi |
노트:
- Each antenna covers a specific frequency range with relatively low gain.
- Using multiple antennas ensures the receiver can maintain omnidirectional coverage without needing to know the drone’s direction.
상대 게시물
유튜브 비디오
7GHz FPV VTX 송신기
7GHz FPV VRX 수신기




Future-proof your FPV system with a 500–8000MHz receiver ready for new transmitters.
견고한 디자인, smart scanning, and ultra-wide coverage for demanding FPV environments.
Unlock clean analog video across multiple bands with one powerful FPV video receiver.
Simplify your setup with a single FPV VRX that supports nearly every analog band.






iVcan.com –
이 광대역 FPV 비디오 수신기는 성능과 다용성 측면에서 정말 깊은 인상을 받았습니다.. 500MHz~8GHz의 다양한 주파수 대역을 포괄합니다., 거의 모든 FPV 송신기와 호환 가능. 자동 스캐닝 기능은 최상의 신호를 신속하게 포착합니다., 지연 시간이 거의 없이 영상 품질이 안정적이고 선명합니다.. 빌드 품질은 견고합니다, 설정은 간단합니다. 안테나를 연결하고 전원을 켜기만 하면 됩니다.. 원활하고 장거리 영상 수신을 중시하는 드론 조종사와 FPV 매니아를 위한 믿을 수 있는 선택입니다..