COFDM модуляторы демодулятор модулі Кодер декодер HDMI CVBS AV кірісі AES 256 FHD RF ағыны
Мазмұны
Another side view
COFDM Encoder module, CVBS / HDMI кіріс, IP output
For More details about the COFDM encoder board, please visit here
COFDM Encoder module Advantage:
- Өте төмен кідіріс H.265/H.264 аудио және бейне кодтауы 1080P@60 нақты уақыттағы бейне түсіру және кодтауды барынша қолдайды
- HDMI немесе AV аудио және бейне кірісі, кодтаудан кейін, Ethernet портының шығысы немесе сымсыз модульге шығыс, бейне кодтау бит жылдамдығын динамикалық түрде конфигурациялауға болады
- аудио кірісін және аудио декодтау шығысын қолдау
- Екі бейнені қолдау (HDMI + AV) бір мезгілде енгізуді кодтау (таңдау, әдепкі - HDMI немесе AV кодтауы, екі кіріс көзінен біреуін таңдаңыз). )
- Web UI немесе сериялық порт UART AT командасы for configuration management
COFDM transmitter module
COFDM modulator-demodulator datasheet download
COFDM demodulator Vcan1776RX-H264 datasheet
The last version of the TX RX board
TX: V6.5.6p
RX: 4.1.2P
Жиі қойылатын сұрақтар
- Question1: Could you please tell me part number of this component, we try to find localy and check. жауап 1: It is a inductance named LOH32PN2R2NNC.
- Suggest Check Points: If the power supply current of the board is well but there is no RF output, maybe the below component TC1-1-13MX+ is generally damaged.
- In order to avoid damage to this device during transportation (the device itself is relatively high), we ordered red glue protection for this device when we shipped it.
- The engineer also suggests that you check to see if the cable is loose or in poor contact.
- Please try to replace the FPC cable connecting the two boards
- We can provide spare parts if you're sure which one.
Әрине
Төмендегі сілтемені тексеріңіз.
Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command
3. сұрақ, If our camera quality is good enough for both 4 МГц және 8 МГц өткізу қабілеті. Бұл жағдайда, Should the customer choose 4 МГц немесе 8 МГц?
жауап: Our one-way COFDM shipments use 4Mz wireless bandwidth by default, corresponding to a video bit rate of 3.12Mbps, which is enough for 1080p; If changed to 8MHz wireless bandwidth under the same conditions, the video bit rate doubles to 6.24Mbps. All customers can choose between wireless bandwidth 4MHz and 8MHz, even 6MHz can also be considered.
4. сұрақ: Which is better for this tx+rx set from a receive sensitivity view?
жауап: For wireless links, it can be simply considered that the receiving sensitivity will be higher at lower wireless bandwidths. From the perspective of receiving sensitivity, 4МГц>6МГц>8МГц
Әрине
Төмендегі сілтемені тексеріңіз
Dron UAV сымсыз бейне таратқышы мен Vcan1870 қабылдағышына арналған COFDM релелік қайталағыш модулі
Single channel receiving sensitivity:
-97+/-1дБм at QPSK 8MHz,
-98+/-1дБм at QPSK 6MHZ,
Sensitivity increased by 3dbm when receiving with dual antennas
The receiver default firmware supports RTSP player, some clients prefer UDP player, which we also can offer, then RTSP player doesn't support. (RTSP and UDP can only choose one of the two firmware)
Төмендегі сілтеме бойынша жүктеп алыңыз.
Splayer_v4.2_2020.6.6
https://drive.google.com/file/d/1ihzUhfnx2Wo3zLO8UAs1aUQeLswonJD-/view?usp=sharing
Splayer_v4.3_2022.10.22
https://drive.google.com/file/d/1PQc-LZ55qGnjeMsjkHYSloHfY3NEUsGH/view?usp=drive_link
Әрине, төмендегі суретті қараңыз.
How to switch HDMI or CVBS video input via the UART AT command?
How to upgrade the COFDM video receiver
How to upgrade the COFDM drone video encoder modulator board
Пікірлер
Пікірлер жоқ болып табылады.