COFDM वायरलेस 4K HDMI वीडियो एनकोडर मॉड्यूलेटर ट्रांसमीटर
विषयसूची
अवलोकन
The VCAN1776-TX-4KHDMI module is a versatile, low-latency HDMI video transmitter that supports up to 4K (3840×2160 @30एफपीएस) HDMI इनपुट. Using advanced H.265/H.264 encoding with COFDM modulation technology, it ensures high-quality video and audio transmission in high-speed motion and non-line-of-sight (NLOS) वातावरण.

प्रमुख विशेषताऐं
-
High-Quality Video Transmission: Supports HDMI input with a maximum resolution of 4K (3840*2160@30एफपीएस), using H.265/H.264 encoding for efficient, कम विलंबता वीडियो प्रसारण.
-
Dual Video Input: Capable of transmitting both HDMI and IP camera inputs simultaneously via COFDM modulation, providing flexible video source options.
-
ऑडियो समर्थन: Accepts analog audio or HDMI audio input for seamless integration with your video transmission needs.
-
Transparent Data Transmission: Supports one-way transparent data transmission via UART, ideal for unidirectional data communication.
-
Web-Based Configuration: Features a Web UI for easy configuration management, allowing users to adjust working parameters such as frequency, बैंडविड्थ, बिटरेट, and RF power via UART control.
- UART Control Interface: Features a UART control interface for manual operation or integration with other systems for advanced control.
Modular Design
The module consists of two interconnected boards (वीडियो कोडेक बोर्ड और सीओएफडीएम मॉड्यूलेशन बोर्ड) connected via a flat cable, providing a compact, customizable solution for a variety of applications.
Flexible Operation
The VCAN1776-TX-4KHDMI module offers various operation modes based on firmware specifications and can be customized to suit specific needs, whether for standard or low-latency operation.
Default Features
-
H.265 video compression and COFDM modulation for enhanced transmission.
-
Supports video input from HDMI and IP cameras via the Ethernet port.
-
Adjustable parameters such as frequency, बैंडविड्थ, बिट दर, and RF power.
Latency and Performance
-
Typical latency between video input and HDMI output on the receiver is 200ms to 250ms under standard settings.
-
For ultra-low-latency needs, the module can be paired with specific receivers and firmware to reduce latency to 50ms–130ms.
Optional Firmware Configurations
-
Standard H.264 video compression (paired with Vcan1776-RX receiver module).
-
Proprietary H.264 with P-frames for lowest latency (with specialized firmware).
विशिष्टता
आईओ
| एचडी वीडियो इनपुट | HDMI, HDMI type A Connector |
| Ethernet1 port | 4पिन PH1.25mm कनेक्टर, can’t work when connecting with the COFDM modulator module |
| Ethernet2 port | 4पिन PH1.25mm कनेक्टर, support IP camera input and web UI management, fixed IP address as 192.168.0.215 |
| टीटीएल यूएआरटी डेटा | 3पिन PH1.25mm कनेक्टर |
| मिनी एचडीएमआई इनपुट या एसडीआई | 4पिन PH1.25mm कनेक्टर |
| मिनी एचडीएमआई इनपुट या एसडीआई | 2पिन PH2.0mm कनेक्टर |
| यूएसबी पोर्ट | 4पिन PH1.25mm कनेक्टर, only for firmware updating |
| HDMI उत्पादन | HDMI type A Connector, can’t work when connecting the COFDM modulator module |
| आरएफ आउटपुट | आईपीईएक्स |
मॉड्यूलेशन
| मॉडुलन प्रारूप | COFDM(टी) |
| वाहक | 2कश्मीर |
| बैंडविड्थ | मिनी एचडीएमआई इनपुट या एसडीआई, 1 किलोहर्ट्ज़ से कदम |
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
| रक्षक मध्यांतर | 1/32, 1/16, 1/8, 1/4 |
| नक्षत्र | QPSK, 16QAM, 64QAM |
| बिटरेट | 0.51 किलोहर्ट्ज़ से कदम |
आरएफ
| आवृत्ति बैंड | 200मेगाहर्ट्ज~2300 मेगाहर्ट्ज(अन्य बैंड को विशेष विनिर्माण के साथ समर्थित किया जा सकता है) |
| ट्यूनिंग चरण आकार | 1KHz |
| बिजली बंद | Configurable from -93dBm to -5dBm(आवृत्ति के अधीन) |
वीडियो और ऑडियो
| वीडियो इनपुट | HDMI or IP camera, auto-detected HDMI input after system start-up, it need to set up via web UI for IP camera input |
| वीडियो प्रारूपों | HDMI इनपुट: 3840*2160@30, 10801 किलोहर्ट्ज़ से कदम, 10801 किलोहर्ट्ज़ से कदम, 10801 किलोहर्ट्ज़ से कदम, 10801 किलोहर्ट्ज़ से कदम, 10801 किलोहर्ट्ज़ से कदम, 10801 किलोहर्ट्ज़ से कदम, 1080@ 50I, 10801 किलोहर्ट्ज़ से कदम, 7201 किलोहर्ट्ज़ से कदम, 7201 किलोहर्ट्ज़ से कदम, 7201 किलोहर्ट्ज़ से कदम, …… |
| वीडियो कोडिंग | H.265 / 264 |
| आवाज श्रोत | Embedded HDMI or Analog audio(Specify Mic in/Line in) |
| ऑडियो कोडिंग | एएसी, 16बिट, स्टीरियो, 32ऑडियो कोडिंग |
| एन्क्रिप्शन | ऑडियो कोडिंग |
निगरानी और नियंत्रण
Comprehensive setup with our Parameter Configure Panel or other device via control UART.
तापमान सीमा
ऑडियो कोडिंग: 0° से +70°C परिवेश (ऐच्छिक: -40° से +85°C )
भंडारण: -40° से +85°C
Dimensions and weight
80x50x15mm(ऑडियो कोडिंग), 41चना.
ऊर्जा की आवश्यकताएं
ऑडियो कोडिंग: 7~30वीडीसी
बिजली की खपत: <400एमए@12वी
Signals description
Encoder board I/O port

Power-in and 5V-out
The power input interface is a 2PIN PH2.0mm connector. The module also provides a 5V power output (two solder holes) for fan that it may be required when the module is integrated with a power amplifier.
HDMI-out
HDMI-out is for video output when this 4K HDMI encoder module works independently as a video decoder. The HDMI-out port doesn’t work when the 4K HDMI encoder module is connected with the COFDM modulator module.
वैकल्पिक दूरी ग्रेड
When 4K HDMI encoder module works independently as a video encoder or decoder, Ethernet1 is valid. When 4K HDMI encoder module connects with the COFDM modulator module, Ethernet1 can’t work because the Ethernet port signals in Ethernet1 and FPC-main are multiplexed.
वैकल्पिक दूरी ग्रेड
The IP address of Ethernet2 is fixed as 192.168.0.215 in firmware, so it can’t be changed. It has a built-in web server in the system, and customers can manage parts of the parameters via the web UI (URL address: एचटीटीपी://192.168.0.215/). Ethernet2 supports connecting IP cameras. The system has a built-in RTSP client to get the RTSP video stream from IP cameras. It needs to set the RTSP video stream URL address of the IP camera to the system via the web UI first.
Ethernet2 is a 4PIN 1.25mm pitch connector, it can be installed according to the customer’s installation needs, either using the vertical insertion connector as shown in the above image, or using the 90-degree bent insertion connector as shown in the image below, with the interface extending out of the right side plate edge.
Analog audio-in/out
When the 4K HDM encoder board is used together with the COFDM modulator module as a COFDM transmitting module, the Audio-out signal pin is invalid. Only the audio-in and GND signal pins are required as analog audio input signal pins.

डेटा उर्ट
The module supports one channel of UART data packed with the video stream and transmitted. When the VCAN1776-TX-4KHDMI module works paired with a Vcan1776-RX receiver, this UART data will be transferred to the data UART of our COFDM receiver module.
उर्ट पर नियंत्रण रखें
4पिन PH1.25mm कनेक्टर, टीटीएल 3.3V. The 4K HDMI Encoder board system can be setup via this control UART with AT commands. Our Parameter Configure Panel can be connected to this control UART directly.
LEDs and GPIO
There are three signal indicator lights (LED1/LED2/LED3) on the right side of the 4K HDMI encoder module board, and the indicator light signals are simultaneously connected to the J6011 connector pins (4PIN 1.25mm connector). Some customers may need to assemble indicator LEDs on their housing case, so they can use J6011 connector pins to add indicator LEDs on their housing case.
When the 4K HDMI encoder module works with a COFDM modulator module, the corresponding signals of the indicator lights are as follows:
| एल ई डी | विवरण | Corresponding J6011 PIN |
| LED1 | सत्ता का नेतृत्व किया: red color, constant light when the board is normal powered. | LED1-PIN |
| LED2 | Green color, constant light when the input video is detected successfully, otherwise it will not light. | LED2-PIN |
| LED3 | एन्कोडिंग-एलईडी: green color, blinks when video encoding normally. | LED3-PIN |
अनुकूलन योग्य विकल्प
-
Video Input Options: Customers can choose between different video input formats, जैसे एचडीएमआई, SDI, and IP camera inputs, depending on the application and hardware compatibility.
-
ट्रांसमिशन पावर & रेंज: You can adjust the transmission power to suit various operational ranges, allowing for longer or shorter communication distances depending on the specific needs of the project or environment.
-
आवृत्ति बैंड: Custom frequency bands can be selected for better adaptability to specific regions or to comply with local regulatory requirements.
-
Video Encoding Formats: The encoder can support different video encoding formats such as H.264, H.265, और दूसरे, enabling users to prioritize video quality, COMPRESSION, or latency.
-
Audio Input Options: Audio input can be configured to support analog or HDMI audio, catering to different sound sources.
-
Data Transmission Channels: There are options for configuring additional data channels, allowing users to transmit auxiliary data, टेलीमेटरी, or control signals alongside the video stream.
-
Web UI Customization: The system can be configured for a customized Web User Interface (यूआई), where users can easily monitor and manage the device settings remotely.
-
Encryption and Security: For secure transmission, the product can be customized with encryption features that ensure the video and data are transmitted safely.
आवेदन
-
ड्रोन वीडियो ट्रांसमिशन:
-
This product is ideal for transmitting live 4K HD video from drones to ground stations in real-time. It can be used for aerial surveillance, inspections, and monitoring applications, where high-definition, low-latency video is essential.
-
-
Search and Rescue Missions:
-
In search and rescue operations, drones equipped with this encoder can send live footage to the ground team, improving situational awareness and helping rescuers make quick decisions in critical environments.
-
-
सैन्य टोही:
-
The COFDM technology ensures stable video transmission even in complex and obstructed environments (like forests, शहरी क्षेत्र, or mountainous regions). This is crucial for military reconnaissance missions that require uninterrupted video feeds from UAVs.
-
-
सार्वजनिक सुरक्षा और संरक्षा:
-
Law enforcement and emergency response teams can use drones equipped with this encoder to monitor crowds, track suspects, or assess disaster zones. The high-definition video feed aids in making better-informed decisions in real-time.
-
-
Agricultural Drones:
-
Drones used in agriculture for crop monitoring or surveying can benefit from high-definition, वास्तविक समय वीडियो प्रसारण, allowing farmers to assess crop health or perform aerial mapping with detailed imagery.
-
-
Broadcasting and Film Production:
-
In the entertainment industry, drones equipped with this video encoder can transmit high-quality footage for live events or film production. This can be especially useful for capturing hard-to-reach aerial shots in high definition.
-
-
Inspection of Infrastructure:
-
Drones used for inspecting critical infrastructure like power lines, पाइपलाइनों, or buildings can send live video feeds back to the control center, allowing operators to identify any issues or damages quickly and accurately.
-
-
औद्योगिक निगरानी:
-
The encoder can also be used in industrial sectors to monitor remote areas, निर्माण स्थल, or dangerous environments, offering a clear and reliable video feed to ensure safety and operational efficiency.
-
In the drone industry, NS COFDM Wireless 4K HDMI Video Encoder Modulator Transmitter is highly beneficial for applications requiring long-range, high-definition video transmission with minimal latency.




iVcan.com –
I’ve been using the VCAN1776-TX-4KHDMI module for drone video transmission, and it’s outstanding. The 4K HDMI input delivers crystal-clear video with H.265 encoding, while COFDM modulation ensures stable long-range performance even in complex, गैर-दृष्टि-रेखीय वातावरण. Low latency and reliable UART/data transmission make it perfect for aerial surveillance, खोज और बचाव, and industrial inspections. The web UI is intuitive for configuration, and the modular design allows flexible integration. कुल मिलाकर, this encoder provides high-definition, real-time video streaming that greatly enhances operational efficiency and situational awareness.