0.5W or 20WPA Mesh Wireless Data Telemetry Radio Link transceiver

Stay connected anywhere – Our drone mesh data radio link ensures seamless real-time communication.

Reliable data transfer – Experience uninterrupted connectivity with our advanced radio link.

Fly farther, communicate better – Optimized for long-range drone data transmission.

फायदा

1. Wireless link rates of up to 740 kbps are supported.
2. It supports point-to-point, बिंदु-से-बहु-बिंदु, बहु-बिंदु-दर-बिंदु, and mesh network topologies.
3. It supports a mesh network with up to 1024 नोड्स.
4. High sensitivity level of -114dBm at 125kHz.
5. It supports the frequency-hopping spread spectrum (यह मॉडल दो-तरफा वायरलेस डेटा लिंक के साथ वीडियो और डेटा वायरलेस ट्रांसमिशन के लिए डिज़ाइन किया गया था).
6. समर्थन 2X Serial Port.

Our self-organizing mesh network data link radio enables centerless, long-distance communication between large-scale nodes. Each node can independently communicate with others without interference, supporting dense node access for wireless transmission, dynamic networking, and flexible reorganization. It features full-multiplexing communication, allowing nodes to transmit and receive data simultaneously without disruption. Even without a central hub, any node can seamlessly inter-operate with all other nodes in the network, ensuring efficient and interference-free interconnectivity.

Our data link mesh radio supports large-scale node access and multi-hop self-organizing networks, featuring 20W transmit power, -114डीबीएम संवेदनशीलता, a maximum effective data transmission rate of 740kbps, and ultra-low latency of 2ms. It is ideal for applications such as swarming drones, the Internet of Things, data chains, रिमोट कंट्रोल, डेटा संग्रहण, कृत्रिम होशियारी, military equipment, और अधिक.

Our data link mesh radio is available in multiple models, all featuring the same appearance and functionality, differing only in operating frequency bands and networking scale.

20W data link mesh radio models

आदर्श	Network size	आवृत्ति बैंड	Optional uart
Vcan2086-F800	मैक्स. 256 नोड्स, तक 3 हॉप्स	820~ 854MHz	TTL or RS232 or RS422
Vcan2086-F900	मैक्स. 256 नोड्स, तक 3 हॉप्स	902~928 मेगाहर्ट्ज	TTL or RS232 or RS422
Vcan2086-H800	मैक्स. 1024 नोड्स, तक 16 हॉप्स	820~ 854MHz	TTL or RS232 or RS422
Vcan2086-H900	मैक्स. 1024 नोड्स, तक 16 हॉप्स	902~928 मेगाहर्ट्ज	TTL or RS232 or RS422

फ़ीचर

• आवृत्ति: Different models support various frequency bands 820-854Mhz or 902-928Mhz. (refer to the model table).

• बैंडविड्थ: Selectable options of 1MHz, 500kHz, 250kHz, and 125kHz.

• नोड्स की संख्या & Hops: समर्थन के लिए ऊपर 1024 nodes with a maximum of 16 hops or 256 nodes with up to 3 हॉप्स (see model table).

• Frequency Hopping Speed:

  • 1मेगाहर्ट्ज: ऊपर 1800 hops per second

  • 500kHz: ऊपर 900 hops per second

  • 250kHz: ऊपर 450 hops per second

  • 125kHz: ऊपर 225 hops per second

• Effective Data Rate:

  • 1मेगाहर्ट्ज: Up to 740kbps

  • 500kHz: Up to 370kbps

  • 250kHz: Up to 185kbps

  • 125kHz: Up to 92kbps

• Full-Multiplexing Communication: समर्थित.

• Air-to-Ground Line-of-Sight Distance: ≥300 किमी.

• Centerless Self-Organized Network: Supports centerless networking, ensuring uninterrupted communication even if a node is destroyed.

• Network Construction Time: अंदर 1 दूसरा.

• Wireless Transmission Delay: As low as 2ms.

• Dynamic Topology: Supports dynamic topology, allowing nodes to join and leave without disrupting communication.

• आरएफ़ पावर: 20डब्ल्यू (43dBm).

• संवेदनशीलता:

  • 125kHz: -114dBm

  • 250kHz: -111dBm

  • 500kHz: -108dBm

  • 1मेगाहर्ट्ज: -105dBm

• आवृत्ति स्थिरता: ≤1ppm.

• मॉड्यूलेशन & कोडन: QPSK modulation with LDPC coding.

• एन्क्रिप्शन: 128-bit encryption for secure communication.

• Low Power Consumption:

  • Receiving mode: <1.5डब्ल्यू (0.06A @ 24V).

  • Transmission power consumption (varies by data rate):

    • 1.2KB/s → ~2.4W (0.1A @ 24V)

    • 3.4KB/s → ~3.9W (0.16A @ 24V)

    • 6.4KB/s → ~5.5W (0.23A @ 24V)

    • 12KB/s → ~9.6W (0.4A @ 24V)

    • 26KB/s → ~19.2W (0.8A @ 24V)

    • 37KB/s → ~24W (1A @ 24V)

    • 48KB/s → ~32W (1.35A @ 24V)

• ऑपरेटिंग वोल्टेज: Default 24V, with a wide input range of 7-36V. Transmission power varies with voltage:

  • 7वी: 2डब्ल्यू

  • 12वी: 5डब्ल्यू

  • 18वी: 10डब्ल्यू

  • 24वी: Slightly above 20W

  • 20-36वी: 20W-30W

  • Power supply requirement: ≥2.5A @ 24V (20डब्ल्यू).

• परिचालन तापमान: -40°C to +55°C.

• आयाम: (0.5 वत्स पीए ) 50 एक्स 50 एक्स 16 मिमी; (20 वत्स पीए) 82.5 × 52 × 16mm.

• वजन: (0.5 वत्स पीए ) 60 ग्राम; (20 वत्स पीए )88 ग्राम.

विशिष्टता

मैं / ओ	विवरण
J30JZ-9PIN connector	Power-input, उर्ट, M0 control signals
M1 Dip Switch	M1 control signal
SMA महिला	Antenna port, the required antenna impedance is 50Ω

J30JZ-9PIN connector

 

 

J30JZ-9PIN connector PIN signal (when assembled as TTL3.3Vor RS232 uart port)

नहीं.	पिन	विवरण	मैंnput or Output
1	M0	M0 control signal	मैं
2	टेक्सास	Uart transmission pin	O
3	RX	Uart receiving pin	मैं
4	GND	GND of uart port	O
5	व्यर्थ	Null	आईओ
6	वीडीडी	Power input VDD	मैं
7	वीडीडी	Power input VDD	मैं
8	GND	Power input GND	मैं
9	GND	Power input GND	मैं

J30JZ-9PIN connector PIN signal (when assembled as RS422 uart port)

नहीं.	पिन	विवरण	मैंnput or Output
1	M0	M0 control signal	मैं
2	422_TX+	RS422 port transmission positive pin	O
3	422_TX-	RS422 port transmission negative pin	O
4	422_RX+	RS422 port receiving positive pin	मैं
5	422_RX-	RS422 port receiving negative pin	मैं
6	वीडीडी	Power input VDD	मैं
7	वीडीडी	Power input VDD	मैं
8	GND	Power input GND	मैं
9	GND	Power input GND	मैं

वैकल्पिक दूरी ग्रेड

The supply voltage range of OUR is 7V~36V, 24V as default.

Uart port

Before shipment, the UART port can be configured as a TTL, RS232, or RS422 UART port based on customer requirements. The TTL/RS232 UART port operates with an 8-bit data format, 1 बंद बिट, and no parity check.

• Configuration Mode: Fixed baud rate of 9600.

• Data Transparent Mode: Configurable baud rates: 9600, 19200, 38400, 57600, 115200, 230400, 460800, या 921600.

Recommended Baud Rates for Different RF Bandwidths:

• 1मेगाहर्ट्ज आरएफ बैंडविड्थ: 921600 baud

• 500kHz rf बैंडविड्थ: 460800 baud

• 250kHz rf बैंडविड्थ: 230400 baud

• 125kHz rf बैंडविड्थ: 115200 baud

Matching the UART baud rate with the wireless throughput ensures stable data transmission and prevents packet loss. The UART ports are primarily used for radio parameter configuration and data transmission.

 

M1 Dip Switch

NS M1 तथा M0 सिग्नल (with M0 located on the J30JZ-9PIN connector) control the operating mode of the radio.

Operating Modes

The radio supports two modes:

1. Data Transparent Transmission Mode

2. Configuration Mode

Users can set the system mode by adjusting the voltage levels of M0 तथा M1:

• Configuration Mode: Activated when M0 and M1 have different voltage levels.

• Transparent Transmission Mode: Activated when M0 and M1 have the same voltage level.

डिफ़ॉल्ट रूप से, the M0 and M1 pins are internally pulled up to a high level, placing the system in transparent mode. To switch to configuration mode, suspend M0 and turn the M1 dip switch to the “सी” Configuration side. To return to transparent transmission mode, turn the M1 dip switch to the “डी” Data side. Mode switching occurs in real time without requiring a system restart.

Configuration Mode

• The radio only responds to configuration commands and does not transmit received serial data to the wireless port.

• Incoming signals from the wireless port are not forwarded to the serial port.

• The UART baud rate is fixed at 9600, साथ में 8 डेटा बिट्स, 1 बंद बिट, and no parity check bit.

• केवल local configuration parameters संशोधित किया जा सकता है.

Transparent Transmission Mode

• If the received serial data is a configuration packet, the radio performs parameter configuration.

• If the received serial data is not a configuration packet, it is transmitted to the wireless port, and incoming signals from the wireless port are forwarded to the serial port.

• दोनों local and remote parameter configurations समर्थित हैं.

Indicator LEDs

 

एलईडी	विवरण
पीडब्लूआर	सत्ता का नेतृत्व किया, Red light on normal powered.
टेक्सास	हरा, data transmission led, briefly light during power on self-test, light when data is transmitting.
RX	हरा, data receiving led, briefly light during power on self-test, light when receiving data.
सी.ए	नीला, interference led, briefly light during power on self-test, light in configuration mode. In transparent transmission mode: When it light on, it means exist interference and the brighter the light, the stronger the interference signal.
FU	नीला, data cache indicator led, briefly light during power on self-test, light when data cache is full.
HFU	नीला, data cache indicator led, briefly light during power on self-test, light when data cache is half full.

To maintain high communication quality, the system includes an internal data buffer with an adjustable size. A larger buffer reduces the risk of data loss but may increase latency. The buffer status can be monitored using the FU तथा HFU indicator LEDs.

It is generally recommended that when the HFU LED is lit, the host computer should temporarily pause data transmission to prevent the buffer from reaching capacity and causing data loss.

सॉफ्टवेयर डाउनलोड

Parameter Configuration Software: Data Link Management Software

https://drive.google.com/file/d/1xX4wJY5-kwPiVSg7EQjIn4ryIHty_Fzx/view?usp=drive_link

How to Switch Languages from Chinese to English？

Serial Port Debugging Tool: ComTransmit.exe

https://drive.google.com/file/d/1xdue01ntCGDdfmTMMX3Oc9tsRXevrYIN/view?usp=drive_link

How to Switch Languages from Chinese to English？

उपयोगकर्ता का मार्गदर्शन

Please click to download the Users Manual PDF

Fast deployment – Get up and running in minutes with our plug-and-play solution.

Future-ready technology – Stay ahead with cutting-edge drone communication.

जुडिये, नियंत्रण, conquer – Take your drone operations to the next level.