Mar a loisgeas tu am firmware agad fhèin gu camara RV1126 AI IPC
Mar a loisgeas tu am firmware agad fhèin gu camara RV1126 AI IPC
The first burning needs to use DriverAssistant to install the driver.
Clàr-innse
Enter Maskrom/loader
Tha trì dòighean ann airson a dhol a-steach don mhodh losgaidh:
1. reboot loader
After entering the system, run the reboot loader, and automatically enter the loader mode after restarting
Uboot：
After powering on, quickly press Ctrl + C to interrupt the Uboot startup, and then type the download command.
2. Short Circuit
Power off, use tweezers to short the two points in the red circle above, and power on
3. Burning
Open RKDev_Tool, agus bidh e a 'taisbeanadh “found a Maskrom device” no “found a Loader device”:
Select “Àrdaich Firmware”:
Click on “Firmware”:
A file selection dialog window pops up, select update.IMG, it may be stuck for a few seconds to load the firmware.
Then click upgrade:
You can see that the log on the right starts to show the burning process.