Mar a loisgeas tu am firmware agad fhèin gu camara RV1126 AI IPC

Mar a loisgeas tu am firmware agad fhèin gu camara RV1126 AI IPC

The first burning needs to use DriverAssistant to install the driver.

Enter Maskrom/loader

Tha trì dòighean ann airson a dhol a-steach don mhodh losgaidh:

1. reboot loader

After entering the system, run the reboot loader, and automatically enter the loader mode after restarting

Uboot：

After powering on, quickly press Ctrl + C to interrupt the Uboot startup, and then type the download command.

2. Cearcall goirid

Power off, use tweezers to short the two points in the red circle above, and power on

3. Burning

Open RKDev_Tool, and it will display “found a Maskrom device” or “found a Loader device”:

Select “Upgrade Firmware”:

Click on “Firmware”:

A file selection dialog window pops up, select update.IMG, it may be stuck for a few seconds to load the firmware.

Then click upgrade:

You can see that the log on the right starts to show the burning process.