COFDM IP wireless data transmitter module
COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port Vcan1816
- Common cofdm transmitters are video signal inputs such as HDMI, CVBS, SDI, or AHD. This one is a transparent transmission module that can support IP cameras and support video and data through cofdm.
- Paired with this COFDM network video data transmitter is a COFDM receiving module, which can realize HDMI and CVBS output, and can also output video to a computer, RTSP, or UDP player through an IP network port RJ45.
- The key role is to use UDP broadcast/multicast to send data.
- Modúl tarchuradóra tarchurtha trédhearcach gan sreang calafort líonra COFDM + receive the module, Modúl tarchuradóra tarchurtha trédhearcach gan sreang calafort líonra COFDM
- Faigheann an modúl tarchurtha sonraí tríd an gcalafort líonra agus tarchuireann sé na sonraí a fhaigheann an calafort líonra i bhfoirm COFDM
- Faigheann an modúl tarchurtha sonraí tríd an gcalafort líonra agus tarchuireann sé na sonraí a fhaigheann an calafort líonra i bhfoirm COFDM, Faigheann an modúl tarchurtha sonraí tríd an gcalafort líonra agus tarchuireann sé na sonraí a fhaigheann an calafort líonra i bhfoirm COFDM
Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3:
Clár ábhair
gnéithe
- Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3, Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3.
- Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3: port líonra, Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3. Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3: Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3
- CFG-UART: Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3, 4Port líonra modúl tarchuradóra tarchurtha trédhearcach gan sreang COFDM ethernet PI3, can be docked to our parameter configuration panel. SconB nó SconC, bandaleithead gan sreang, SconB nó SconC (SconB nó SconC, SconB nó SconC, modh réaltbhuíon, SconB nó SconC, etc) SconB nó SconC.
- SconB nó SconC (Tx): SconB nó SconC.
- Comhéadan TF cárta, uasghrádú bogearraí, SconB nó SconC.
- comhéadan ionchur Power (Cumhacht): 2PIN 2.0mm pitch Phoenix terminal. voltas soláthair: 7V ~ 24v.
- SconB nó SconC: SconB nó SconC, and the data is flashed when the data is transmitted usually.
- Power táscaire LED: The power input indicator, SconB nó SconC.
- SconB nó SconC: 73SconB nó SconC (gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird), gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird.
- gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird:
- gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird: 1/2, 2/3, 3/4, 5/6, 7/8
- gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird: QPSK / QAM16 / QAM64
- IFFT mód: 2K
- gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird: 1/4, 1/8, 1/16, 1/32
- Bandaleithid gan sreang: 1 gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird, 1Céim KHz
- gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird: -94gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird (gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird, gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird).
- gan an méid feistí comhéadan agus chónaisc protruding ó imeall an bhoird: between 200MHz ~ and 2300MHz can be configured arbitrarily
Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM
Ráta tarchuir gan sreang (Ráta comhéadan aer):
ráta(Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM) Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM (Bandwidth(MHz) * 8.0/7.0) / (1+GI) * 1512/2048*Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM(Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM) * Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM * 188/204.
Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM, Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM, Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM, Ríomh ráta tarchurtha córas tarchurtha gan sreang COFDM:
UART AT Command
ATDR、ATSD、ATSG、ATSM、ATGD、ATSR、ATGR、ATGB is useful
For the UART AT command operation and format, please check the below link.
Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command
Receiver Module
Suggestions
- This is a one-way unidirectional transmission system. if you need a two-way bidirectional transmission system, please check this link. https://ivcan.com/t/two-ways/ or https://ivcan.com/ru/p/mini-cofdm-wireless-ethernet-transmission-module-rj45/
- This is only a data transmission system, if you need video+data transmission, please look details of these modules, https://ivcan.com/p/modulator-demodulator-module-encoder-decoder-hdmi-cvbs/
- If you need a relay (athsheoltóir) to support a longer transmission range (distances), please choose stronger PA (Power Amplifier) istigh, mar shampla, change 1Watts PA to 2.5 Watts nó 5 Watts.
–160MHz~860MHz HD video COFDM receiver module with HDMI/AV/Ethernet/USB output
The COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, suitable for use in fluid and high-mobility applications. The receiver module accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. The receiver module can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver module features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios supported.
The receiver module also includes DVR record functionality with a Micro SD card or USB disk. chomh maith, the receiver module has a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like smartphones or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.
When paired with the Our COFDM transmitter module, the receiver module offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.
- COFDM demodulation and H.264 video decoder;
- Full HD resolution, 1080P@60fps;
- Great security by AES decryption;
- DVR record with Micro SD card or USB disk;
- Built-in RTSP server enables video streaming over Ethernet;
- Enables video streaming over a USB host for the remote device;
- Supports display characters string on the video display screen in OSD mode;
- Stable signal transfer in NLOS and high-speed moving;
- Adjustable working frequency, and bandwidth.
Sonraíocht:
IO
HD video output | HDMI type A connector |
Composite video output | 6PIN PH2.0mm connector |
aschur fuaime | Embedded HDMI and CVBS |
RF ionchur | Two SMA female 50Ω |
• modhnú COFDM agus comhbhrú físeáin H.264/H.265 | 2PIN PH2.54mm connector |
USB Host | 4PIN PH2.0mm connector |
TTL UART data | 3PIN PH1.25mm connector, 3.3V signal |
• modhnú COFDM agus comhbhrú físeáin H.264/H.265 | 4PIN PH1.25mm connector, 3.3V signal |
Ethernet | 6PIN PH2.0mm connector |
TF-Card | TF-Card slot |
eochracha&LEDs | 2*5PIN PH2.0mm connector |
demodulation
Demodulation Formats | COFDM(DVB-T) |
Iompróirí | 2K |
Bandaleithid | • modhnú COFDM agus comhbhrú físeáin H.264/H.265, • modhnú COFDM agus comhbhrú físeáin H.264/H.265 |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
eatramh garda | 1/32, 1/16, 1/8, 1/4 |
réaltbhuíon | QPSK, 16QAM, 64QAM |
Giotán | 0.5Mbps go 31.67Mbps |
RF
Bandaí minicíocht | 160MHz ~ 860MHz |
Méid Céim Tiúnadh | 1KHz |
íogaireacht | -97±1dBm(BW=8MHz, QPSK, CR=2/3, GI=1/16) for one channel and add 3dBm for two channel |
Físeán agus Fuaime
aschur Video | HDMI and CVBS, Ethernet(RTSP protocol by default, option UDP), USB |
formáidí físeán | 1080P or 720P
720*480 60I(NTSC), 720*576 50I(PAL) |
Díchódaithe Físeáin | MPEG-4/H.264 AVC |
aschur fuaime | Embedded HDMI and AV audio |
Díchódú Fuaime | AAC |
Díchriptiú | Mbps go 31.67Mbps |
stóráil | USB disk or micro SD card |
Monatóireacht agus rialú
Comprehensive receiver setup with Our Config Panel or Windows PC or other devices via control UART.
Raon teochta
Socrú cuimsitheach tarchuradóra le Painéal Cumraíochta Sihid nó PC nó feiste eile trí UART Rialaithe: 0° to +70°C Ambient
stóráil: Socrú cuimsitheach tarchuradóra le Painéal Cumraíochta Sihid nó PC nó feiste eile trí UART Rialaithe
Tréithe fisiceacha
Board Dimensions: 80.4*50.8mm
Ceanglais chumhachta
Socrú cuimsitheach tarchuradóra le Painéal Cumraíochta Sihid nó PC nó feiste eile trí UART Rialaithe: 9~24VDC
Ídiú cumhachta: <300mA@12V
IO Signals
eochracha + LEDs:
The receiver module has a 2*5PIN PH2.0mm connector which provides “keys + LEDs” signals. It is designed for customers who want to expand LEDs and keys to their cases.
PWR led signal: this two-pin can connect to an led for the power indicator, and constant light when the device is normally powered.
The link led signal: this two-pin can connect to an led for a wireless link indicator, which blinks when the video stream is received.
REC led signal: this two-pin can connect to an led for a record indicator, and constant light when video recording.
REC key signal: this two-pin can connect to a button for the switch of video recording, and a short press to change its status. The receiver will automatically check the storage device(micro SD card or USB disk) after powering on and start to record video when the storage device is inserted. Just press it to stop or record again.
OSD key: this two-pin can connect to a button for turning on/off the status of the OSD displaying, long press it to switch(more than 1s). The status will be kept after a reboot. When the OSD status is on without any OSD data input from the data uart, the device will display information on the video screen as:
RF:338.0MHz BW:4.0MHz ; RF, minicíocht oibre; BW, bandaleithead
QPSK CR:2/3 GI:1/16 ; réaltbhuíon, FEC, eatramh garda
AIR:3.90Mbps ; AIR, wireless transmitting bitrates
VBR:3.05Mbps AES OFF ; VBR, video bitrates; AES OFF, AES encryption turned off.
SIG1:27 SIG2:22 ; SIG1, the signal intensity of antenna 1; SIG2, the signal intensity of antenna 2
ber1:0.14% ber2:100.00% ; ber1, bit error rate of antenna 1; ber2, bit error rate of antenna 2
REC OFF Gan Stóráil ; video recording status
Paired with COFDM transmitter:
The default normal features of the two-antenna Wireless receiver module can be paired with all of Our H.264 transmitter modules. The HD video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 200~250ms.
Our two-antenna COFDM Wireless Receiver module can also be paired with our COFDM transmitter module for the lowest video latency application when manufactured with specified firmware. The specified firmware enables proprietary H.264 video compression/decompression only using p-frames for the lowest latency. The video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 50ms to 130ms.
How to test COFDM IP wireless video data transmitter module?
ethernet modem in one way
CCanna
Please note that this network transparent transmission device is one-way transmission, it can only realize UDP broadcast function, although there is an RJ45 network port, but because it is not two-way transmission, it cannot realize the ping command, so even if you want to connect an IP camera, you need special customization IP cameras, because ordinary IP cameras need two-way transmission equipment.
How to test this network transparent transmission device, please check the below link
How to test COFDM IP wireless video data transmitter module
no, just net transfer via IP ethernet RJ45 input.
- If you want to test the video transfer, maybe you need an encoder board VC1746, transfer HDMI / CVBS video to IP stream, then connect the 1816 tarchuradóra.
- Ceist: I already have Vcan1776, which has a Vcan1746 encoder board at the transmitter module, should I get one more encoder board?
- Freagra: Although the encoder board of Vcan1776 can be reused. It needs to disassemble the Vcan1776 RF module, then connect the network port adapter cable, and change the different firmware. It is not recommended to do this. It is recommended that you purchase another separate encoder board.
- The voltage range of TX RX is 7~24V.
- At 12V power supply, use an adapter with a maximum of 1A or more.
- Prepare a formattedFAT32format Micro SD card
- Unzip the upgrade file from our verify and send to you, Here is "1816_update_image_xx_yy.zip" comhad, and copy it to the root directory of the Micro SD card, pay attention to keep the directory structure unchanged (there is a flash folder in the root directory of the Micro SD card, and there is an app folder in it).
- Insert the Micro SD card into the Vcan1816 module, power on and wait for the red light on the board to flash, indicating that the upgrade is successful.
- Nóta:
Under normal circumstances, the update will be completed within 30s after power-on (the red light flashes). If the red light does not flash for a long time after power-on, please check the connection of Micro SD and try power-on again.