Some customers have purchased a lot of our TDD wireless video data remote control transmission modules, although when we originally set them up, we set 192.168.1.11 as the receiving module and 192.168.1.12 as the transmitting module.

toutefois, the customer now wants to change the role of some of the transmitting modules to receiving modules through configuration, and re-pair them for use together.

En réalité, the hardware of the transmitter module and the receiver module are the same, the only difference is in the configuration. Because the video needs to be transmitted from the air transmitter module to the ground receiver module, and the data transmission volume from the receiver module to the transmitter module is generally small, the TDD setting on the receiver module is 1D4U, and the configuration of the transmitter module is gray and cannot be changed.

Access Node Configuration of air transmitter module with camera — Nœud d'accès Configuration du module transmetteur d'air avec caméra

Central Node Configuration of ground receiver module with monitor

Any two modules with unique IP addresses can form a pair.
One of them is set as the central node (C'est, the ground receiver, which can be connected to the display), and the TTD configuration is 1D4U.
The module is set as an access node, which is the aerial drone that can connect to the camera. TDD configuration cannot be set.

The above role configurations of the transmitting module and receiving module are suitable for the following models.