150km 200 km bezdrátový přenos dat telemetrický transceiver bez videa

150km 200km wireless data transmission telemetry transceiver Data Link

Our digital radio is mainly used for high-power long-distance industrial data transmission.
It has a small size, dobrá integrace, a vysokou citlivostí.
Work in the 902~928MHz frequency band.
The transmission distances supported 100km and 200km, resp.

Funkce

Frekvenční rozsah: 902-928MHz
Spread spectrum method: Tento model byl navržen pro bezdrátový přenos videa a dat s obousměrným bezdrátovým datovým spojem
Šifrování dat: 256-bit physical layer encryption
Komunikační rozsah: up to 100km/200km
Výstupní výkon: 10W (40dBm)
Air interface rate: až 276,4 kbps
Serial port baud rate: až 921,6 kbps
Provozní teplota: -40°C to 85°C

Specifikace

Pracovní teplota: -40℃ ~ + 85 ℃

Instructions for placing an order

Serial port is TTL or RS232

What baud rate needs to be set

přijímač Anténa

At the default package, Pošleme vám 2 pcs omnidirectional antenna for the transmitter and receiver. If your transmission range is over 100km, it is better to change a directional antenna to the ground receiver and try to install it as high as possible.

 

1. Does your wireless data transmission support Pixhawk autopilot? Can it send data/video? What is the frequency?

1. Support Pixhawk autopilot.
2. Can send rand receiver the data, but no video, if need data+video, prosím zkontrolujte TX900
3. The working frequency is from 902Mhz to 928Mhz.

2. Does the antenna is omnidirectional or directional?

1. A small antenna in the air unit is omnidirectional, počítaje v to.
2. A big antenna in the ground unit, it is better to use a directional antenna, neobsahuje.

3. Pokud koupím 3 Jednotky, can we control 2 drones at the same time, switching between them?

1. Our wireless data transmission supports multi-point-to-point networking, and one ground unit can control multiple drones.

4. What should I do if I lost one unit? (the transmitter with the drone has lost)

1. You should buy a new one and pair them.

5. Are they full-duplex and RS232 port?

1. Ano, it is full-duplex.
2. We can customize the data port to RS232 if you need.

6. If I change the Baud rate from 57600 na 115200, will this affect distance or data?

1. It doesn't matter if the serial port baud rate is changed to 115200, but the corresponding serial port baud rate of the flight controller must also be changed to 115200.
2. Samozřejmě, you can also change the serial port baud rate to 57600. The biggest impact is that the flight control may increase the amount of data as the serial port baud rate increases. This is the only impact.

7. What is the power supply and power pin define?

1. 10-watts Power Amplifier model needs 24V power supply

Configuration Tool Software

Stažení https://drive.google.com/file/d/1ACNyk_xsgtlLXPBPTWp-qpyqPjGk8UQT/view?usp=drive_link

Uživatelský manuál

Users Manual online (HTML)

Users Manual online (PDF)