Analog FPV Video Transmitter and Receiver AHD CVBS Camera input 100Mhz-3.3G frequency

introducció

This is a newly launched analog video transmission module.
It is a module with a small size, baix consum d'energia, and simple frequency matching.
This product processes analog video signals with continuously changing time (including space) and amplitude as a source and channel to meet the needs of different scenarios.

característica

1. Multiple receivers can receive video signals at the same time\
2. baixa latència, wide frequency, baix consum d'energia, low heat generation
3. Stable transmission efficiency
4. Simple frequency matching
5. mida petita (TX: 48mm x 32mm) (RX: 38mm x 28 mm), baix consum d'energia
6. For simple frequency change, the starting frequency can be set through the serial port, i la 4 frequency points can be cycled by pressing the button
7. High image quality and low signal interference rate

Especificació

1. Transmitter frequency range 100Mhz-3500Mhz (3.5G)
2. Receiver frequency range 100Mhz-3500Mhz (3.5G)
3. Default frequency range 400-900Mhz
4. Default power amplifier: 3-watt
5. Power supply 5V (not input 12V)
6. Font d'entrada de vídeo: AHD / CVBS camera
7. Frequency selection method: one button (four frequency preset loops chosen)

Preguntes freqüents:

Q. Can you make the analog FPV transmitter and receiver have a relay/repeater?

la: This is an analog model, there is no relay or repeater in the middle. If you need a relay or repeater for your FPV transmission system, please check the below model, which uses the COFDM digital transmission system, it can have a repeater. 3W PA 50KM